Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs
[linux-2.6.git] / arch / blackfin / mach-bf537 / boards / stamp.c
1 /*
2  * File:         arch/blackfin/mach-bf537/boards/stamp.c
3  * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
4  * Author:       Aidan Williams <aidan@nicta.com.au>
5  *
6  * Created:
7  * Description:
8  *
9  * Modified:
10  *               Copyright 2005 National ICT Australia (NICTA)
11  *               Copyright 2004-2006 Analog Devices Inc.
12  *
13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
14  *
15  * This program is free software; you can redistribute it and/or modify
16  * it under the terms of the GNU General Public License as published by
17  * the Free Software Foundation; either version 2 of the License, or
18  * (at your option) any later version.
19  *
20  * This program is distributed in the hope that it will be useful,
21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
23  * GNU General Public License for more details.
24  *
25  * You should have received a copy of the GNU General Public License
26  * along with this program; if not, see the file COPYING, or write
27  * to the Free Software Foundation, Inc.,
28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
29  */
30
31 #include <linux/device.h>
32 #include <linux/kernel.h>
33 #include <linux/platform_device.h>
34 #include <linux/mtd/mtd.h>
35 #include <linux/mtd/nand.h>
36 #include <linux/mtd/partitions.h>
37 #include <linux/mtd/plat-ram.h>
38 #include <linux/mtd/physmap.h>
39 #include <linux/spi/spi.h>
40 #include <linux/spi/flash.h>
41 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
42 #include <linux/usb/isp1362.h>
43 #endif
44 #include <linux/ata_platform.h>
45 #include <linux/irq.h>
46 #include <linux/interrupt.h>
47 #include <linux/i2c.h>
48 #include <linux/usb/sl811.h>
49 #include <linux/spi/mmc_spi.h>
50 #include <asm/dma.h>
51 #include <asm/bfin5xx_spi.h>
52 #include <asm/reboot.h>
53 #include <asm/portmux.h>
54 #include <asm/dpmc.h>
55
56 /*
57  * Name the Board for the /proc/cpuinfo
58  */
59 const char bfin_board_name[] = "ADI BF537-STAMP";
60
61 /*
62  *  Driver needs to know address, irq and flag pin.
63  */
64
65 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
66 #include <linux/usb/isp1760.h>
67 static struct resource bfin_isp1760_resources[] = {
68         [0] = {
69                 .start  = 0x203C0000,
70                 .end    = 0x203C0000 + 0x000fffff,
71                 .flags  = IORESOURCE_MEM,
72         },
73         [1] = {
74                 .start  = IRQ_PF7,
75                 .end    = IRQ_PF7,
76                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
77         },
78 };
79
80 static struct isp1760_platform_data isp1760_priv = {
81         .is_isp1761 = 0,
82         .port1_disable = 0,
83         .bus_width_16 = 1,
84         .port1_otg = 0,
85         .analog_oc = 0,
86         .dack_polarity_high = 0,
87         .dreq_polarity_high = 0,
88 };
89
90 static struct platform_device bfin_isp1760_device = {
91         .name           = "isp1760-hcd",
92         .id             = 0,
93         .dev = {
94                 .platform_data = &isp1760_priv,
95         },
96         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
97         .resource       = bfin_isp1760_resources,
98 };
99 #endif
100
101 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
102 #include <linux/input.h>
103 #include <linux/gpio_keys.h>
104
105 static struct gpio_keys_button bfin_gpio_keys_table[] = {
106         {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
107         {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
108         {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
109         {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
110 };
111
112 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
113         .buttons        = bfin_gpio_keys_table,
114         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
115 };
116
117 static struct platform_device bfin_device_gpiokeys = {
118         .name      = "gpio-keys",
119         .dev = {
120                 .platform_data = &bfin_gpio_keys_data,
121         },
122 };
123 #endif
124
125 static struct resource bfin_gpios_resources = {
126         .start = 0,
127         .end   = MAX_BLACKFIN_GPIOS - 1,
128         .flags = IORESOURCE_IRQ,
129 };
130
131 static struct platform_device bfin_gpios_device = {
132         .name = "simple-gpio",
133         .id = -1,
134         .num_resources = 1,
135         .resource = &bfin_gpios_resources,
136 };
137
138 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
139 static struct resource bfin_pcmcia_cf_resources[] = {
140         {
141                 .start = 0x20310000, /* IO PORT */
142                 .end = 0x20312000,
143                 .flags = IORESOURCE_MEM,
144         }, {
145                 .start = 0x20311000, /* Attribute Memory */
146                 .end = 0x20311FFF,
147                 .flags = IORESOURCE_MEM,
148         }, {
149                 .start = IRQ_PF4,
150                 .end = IRQ_PF4,
151                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
152         }, {
153                 .start = 6, /* Card Detect PF6 */
154                 .end = 6,
155                 .flags = IORESOURCE_IRQ,
156         },
157 };
158
159 static struct platform_device bfin_pcmcia_cf_device = {
160         .name = "bfin_cf_pcmcia",
161         .id = -1,
162         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
163         .resource = bfin_pcmcia_cf_resources,
164 };
165 #endif
166
167 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
168 static struct platform_device rtc_device = {
169         .name = "rtc-bfin",
170         .id   = -1,
171 };
172 #endif
173
174 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
175 static struct resource smc91x_resources[] = {
176         {
177                 .name = "smc91x-regs",
178                 .start = 0x20300300,
179                 .end = 0x20300300 + 16,
180                 .flags = IORESOURCE_MEM,
181         }, {
182
183                 .start = IRQ_PF7,
184                 .end = IRQ_PF7,
185                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
186         },
187 };
188 static struct platform_device smc91x_device = {
189         .name = "smc91x",
190         .id = 0,
191         .num_resources = ARRAY_SIZE(smc91x_resources),
192         .resource = smc91x_resources,
193 };
194 #endif
195
196 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
197 static struct resource dm9000_resources[] = {
198         [0] = {
199                 .start  = 0x203FB800,
200                 .end    = 0x203FB800 + 8,
201                 .flags  = IORESOURCE_MEM,
202         },
203         [1] = {
204                 .start  = IRQ_PF9,
205                 .end    = IRQ_PF9,
206                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
207         },
208 };
209
210 static struct platform_device dm9000_device = {
211         .name           = "dm9000",
212         .id             = -1,
213         .num_resources  = ARRAY_SIZE(dm9000_resources),
214         .resource       = dm9000_resources,
215 };
216 #endif
217
218 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
219 static struct resource ax88180_resources[] = {
220         [0] = {
221                 .start  = 0x20300000,
222                 .end    = 0x20300000 + 0x8000,
223                 .flags  = IORESOURCE_MEM,
224         },
225         [1] = {
226                 .start  = IRQ_PF7,
227                 .end    = IRQ_PF7,
228                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
229         },
230 };
231
232 static struct platform_device ax88180_device = {
233         .name           = "ax88180",
234         .id             = -1,
235         .num_resources  = ARRAY_SIZE(ax88180_resources),
236         .resource       = ax88180_resources,
237 };
238 #endif
239
240 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
241 static struct resource sl811_hcd_resources[] = {
242         {
243                 .start = 0x20340000,
244                 .end = 0x20340000,
245                 .flags = IORESOURCE_MEM,
246         }, {
247                 .start = 0x20340004,
248                 .end = 0x20340004,
249                 .flags = IORESOURCE_MEM,
250         }, {
251                 .start = CONFIG_USB_SL811_BFIN_IRQ,
252                 .end = CONFIG_USB_SL811_BFIN_IRQ,
253                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
254         },
255 };
256
257 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
258 void sl811_port_power(struct device *dev, int is_on)
259 {
260         gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
261         gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
262 }
263 #endif
264
265 static struct sl811_platform_data sl811_priv = {
266         .potpg = 10,
267         .power = 250,       /* == 500mA */
268 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
269         .port_power = &sl811_port_power,
270 #endif
271 };
272
273 static struct platform_device sl811_hcd_device = {
274         .name = "sl811-hcd",
275         .id = 0,
276         .dev = {
277                 .platform_data = &sl811_priv,
278         },
279         .num_resources = ARRAY_SIZE(sl811_hcd_resources),
280         .resource = sl811_hcd_resources,
281 };
282 #endif
283
284 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
285 static struct resource isp1362_hcd_resources[] = {
286         {
287                 .start = 0x20360000,
288                 .end = 0x20360000,
289                 .flags = IORESOURCE_MEM,
290         }, {
291                 .start = 0x20360004,
292                 .end = 0x20360004,
293                 .flags = IORESOURCE_MEM,
294         }, {
295                 .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
296                 .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
297                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
298         },
299 };
300
301 static struct isp1362_platform_data isp1362_priv = {
302         .sel15Kres = 1,
303         .clknotstop = 0,
304         .oc_enable = 0,
305         .int_act_high = 0,
306         .int_edge_triggered = 0,
307         .remote_wakeup_connected = 0,
308         .no_power_switching = 1,
309         .power_switching_mode = 0,
310 };
311
312 static struct platform_device isp1362_hcd_device = {
313         .name = "isp1362-hcd",
314         .id = 0,
315         .dev = {
316                 .platform_data = &isp1362_priv,
317         },
318         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
319         .resource = isp1362_hcd_resources,
320 };
321 #endif
322
323 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
324 static struct platform_device bfin_mac_device = {
325         .name = "bfin_mac",
326 };
327 #endif
328
329 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
330 static struct resource net2272_bfin_resources[] = {
331         {
332                 .start = 0x20300000,
333                 .end = 0x20300000 + 0x100,
334                 .flags = IORESOURCE_MEM,
335         }, {
336                 .start = IRQ_PF7,
337                 .end = IRQ_PF7,
338                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
339         },
340 };
341
342 static struct platform_device net2272_bfin_device = {
343         .name = "net2272",
344         .id = -1,
345         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
346         .resource = net2272_bfin_resources,
347 };
348 #endif
349
350 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
351 #ifdef CONFIG_MTD_PARTITIONS
352 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
353
354 static struct mtd_partition bfin_plat_nand_partitions[] = {
355         {
356                 .name   = "linux kernel(nand)",
357                 .size   = 0x400000,
358                 .offset = 0,
359         }, {
360                 .name   = "file system(nand)",
361                 .size   = MTDPART_SIZ_FULL,
362                 .offset = MTDPART_OFS_APPEND,
363         },
364 };
365 #endif
366
367 #define BFIN_NAND_PLAT_CLE 2
368 #define BFIN_NAND_PLAT_ALE 1
369 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
370 {
371         struct nand_chip *this = mtd->priv;
372
373         if (cmd == NAND_CMD_NONE)
374                 return;
375
376         if (ctrl & NAND_CLE)
377                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
378         else
379                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
380 }
381
382 #define BFIN_NAND_PLAT_READY GPIO_PF3
383 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
384 {
385         return gpio_get_value(BFIN_NAND_PLAT_READY);
386 }
387
388 static struct platform_nand_data bfin_plat_nand_data = {
389         .chip = {
390                 .chip_delay = 30,
391 #ifdef CONFIG_MTD_PARTITIONS
392                 .part_probe_types = part_probes,
393                 .partitions = bfin_plat_nand_partitions,
394                 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
395 #endif
396         },
397         .ctrl = {
398                 .cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
399                 .dev_ready = bfin_plat_nand_dev_ready,
400         },
401 };
402
403 #define MAX(x, y) (x > y ? x : y)
404 static struct resource bfin_plat_nand_resources = {
405         .start = 0x20212000,
406         .end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
407         .flags = IORESOURCE_IO,
408 };
409
410 static struct platform_device bfin_async_nand_device = {
411         .name = "gen_nand",
412         .id = -1,
413         .num_resources = 1,
414         .resource = &bfin_plat_nand_resources,
415         .dev = {
416                 .platform_data = &bfin_plat_nand_data,
417         },
418 };
419
420 static void bfin_plat_nand_init(void)
421 {
422         gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
423 }
424 #else
425 static void bfin_plat_nand_init(void) {}
426 #endif
427
428 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
429 static struct mtd_partition stamp_partitions[] = {
430         {
431                 .name       = "bootloader(nor)",
432                 .size       = 0x40000,
433                 .offset     = 0,
434         }, {
435                 .name       = "linux kernel(nor)",
436                 .size       = 0x180000,
437                 .offset     = MTDPART_OFS_APPEND,
438         }, {
439                 .name       = "file system(nor)",
440                 .size       = 0x400000 - 0x40000 - 0x180000 - 0x10000,
441                 .offset     = MTDPART_OFS_APPEND,
442         }, {
443                 .name       = "MAC Address(nor)",
444                 .size       = MTDPART_SIZ_FULL,
445                 .offset     = 0x3F0000,
446                 .mask_flags = MTD_WRITEABLE,
447         }
448 };
449
450 static struct physmap_flash_data stamp_flash_data = {
451         .width      = 2,
452         .parts      = stamp_partitions,
453         .nr_parts   = ARRAY_SIZE(stamp_partitions),
454 };
455
456 static struct resource stamp_flash_resource = {
457         .start = 0x20000000,
458         .end   = 0x203fffff,
459         .flags = IORESOURCE_MEM,
460 };
461
462 static struct platform_device stamp_flash_device = {
463         .name          = "physmap-flash",
464         .id            = 0,
465         .dev = {
466                 .platform_data = &stamp_flash_data,
467         },
468         .num_resources = 1,
469         .resource      = &stamp_flash_resource,
470 };
471 #endif
472
473 #if defined(CONFIG_MTD_M25P80) \
474         || defined(CONFIG_MTD_M25P80_MODULE)
475 static struct mtd_partition bfin_spi_flash_partitions[] = {
476         {
477                 .name = "bootloader(spi)",
478                 .size = 0x00040000,
479                 .offset = 0,
480                 .mask_flags = MTD_CAP_ROM
481         }, {
482                 .name = "linux kernel(spi)",
483                 .size = 0x180000,
484                 .offset = MTDPART_OFS_APPEND,
485         }, {
486                 .name = "file system(spi)",
487                 .size = MTDPART_SIZ_FULL,
488                 .offset = MTDPART_OFS_APPEND,
489         }
490 };
491
492 static struct flash_platform_data bfin_spi_flash_data = {
493         .name = "m25p80",
494         .parts = bfin_spi_flash_partitions,
495         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
496         /* .type = "m25p64", */
497 };
498
499 /* SPI flash chip (m25p64) */
500 static struct bfin5xx_spi_chip spi_flash_chip_info = {
501         .enable_dma = 0,         /* use dma transfer with this chip*/
502         .bits_per_word = 8,
503 };
504 #endif
505
506 #if defined(CONFIG_SPI_ADC_BF533) \
507         || defined(CONFIG_SPI_ADC_BF533_MODULE)
508 /* SPI ADC chip */
509 static struct bfin5xx_spi_chip spi_adc_chip_info = {
510         .enable_dma = 1,         /* use dma transfer with this chip*/
511         .bits_per_word = 16,
512 };
513 #endif
514
515 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
516         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
517 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
518         .enable_dma = 0,
519         .bits_per_word = 16,
520 };
521 #endif
522
523 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
524 static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
525         .enable_dma = 0,
526         .bits_per_word = 16,
527 };
528 #endif
529
530 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
531 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
532
533 static int bfin_mmc_spi_init(struct device *dev,
534         irqreturn_t (*detect_int)(int, void *), void *data)
535 {
536         return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
537                 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
538 }
539
540 static void bfin_mmc_spi_exit(struct device *dev, void *data)
541 {
542         free_irq(MMC_SPI_CARD_DETECT_INT, data);
543 }
544
545 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
546         .init = bfin_mmc_spi_init,
547         .exit = bfin_mmc_spi_exit,
548         .detect_delay = 100, /* msecs */
549 };
550
551 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
552         .enable_dma = 0,
553         .bits_per_word = 8,
554 };
555 #endif
556
557 #if defined(CONFIG_PBX)
558 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
559         .ctl_reg        = 0x4, /* send zero */
560         .enable_dma     = 0,
561         .bits_per_word  = 8,
562         .cs_change_per_word = 1,
563 };
564 #endif
565
566 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
567 #include <linux/spi/ad7877.h>
568 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
569         .enable_dma = 0,
570         .bits_per_word = 16,
571 };
572
573 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
574         .model                  = 7877,
575         .vref_delay_usecs       = 50,   /* internal, no capacitor */
576         .x_plate_ohms           = 419,
577         .y_plate_ohms           = 486,
578         .pressure_max           = 1000,
579         .pressure_min           = 0,
580         .stopacq_polarity       = 1,
581         .first_conversion_delay = 3,
582         .acquisition_time       = 1,
583         .averaging              = 1,
584         .pen_down_acc_interval  = 1,
585 };
586 #endif
587
588 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
589 #include <linux/spi/ad7879.h>
590 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
591         .model                  = 7879, /* Model = AD7879 */
592         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
593         .pressure_max           = 10000,
594         .pressure_min           = 0,
595         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
596         .acquisition_time       = 1,    /* 4us acquisition time per sample */
597         .median                 = 2,    /* do 8 measurements */
598         .averaging              = 1,    /* take the average of 4 middle samples */
599         .pen_down_acc_interval  = 255,  /* 9.4 ms */
600         .gpio_output            = 1,    /* configure AUX/VBAT/GPIO as GPIO output */
601         .gpio_default           = 1,    /* During initialization set GPIO = HIGH */
602 };
603 #endif
604
605 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
606 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
607         .enable_dma = 0,
608         .bits_per_word = 16,
609 };
610 #endif
611
612 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
613 static struct bfin5xx_spi_chip spidev_chip_info = {
614         .enable_dma = 0,
615         .bits_per_word = 8,
616 };
617 #endif
618
619 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
620 static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
621         .enable_dma     = 0,
622         .bits_per_word  = 8,
623 };
624 #endif
625
626 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
627 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
628         .enable_dma     = 1,
629         .bits_per_word  = 8,
630         .cs_gpio = GPIO_PF10,
631 };
632 #endif
633
634 #if defined(CONFIG_MTD_DATAFLASH) \
635         || defined(CONFIG_MTD_DATAFLASH_MODULE)
636
637 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
638         {
639                 .name = "bootloader(spi)",
640                 .size = 0x00040000,
641                 .offset = 0,
642                 .mask_flags = MTD_CAP_ROM
643         }, {
644                 .name = "linux kernel(spi)",
645                 .size = 0x180000,
646                 .offset = MTDPART_OFS_APPEND,
647         }, {
648                 .name = "file system(spi)",
649                 .size = MTDPART_SIZ_FULL,
650                 .offset = MTDPART_OFS_APPEND,
651         }
652 };
653
654 static struct flash_platform_data bfin_spi_dataflash_data = {
655         .name = "SPI Dataflash",
656         .parts = bfin_spi_dataflash_partitions,
657         .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
658 };
659
660 /* DataFlash chip */
661 static struct bfin5xx_spi_chip data_flash_chip_info = {
662         .enable_dma = 0,         /* use dma transfer with this chip*/
663         .bits_per_word = 8,
664 };
665 #endif
666
667 static struct spi_board_info bfin_spi_board_info[] __initdata = {
668 #if defined(CONFIG_MTD_M25P80) \
669         || defined(CONFIG_MTD_M25P80_MODULE)
670         {
671                 /* the modalias must be the same as spi device driver name */
672                 .modalias = "m25p80", /* Name of spi_driver for this device */
673                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
674                 .bus_num = 0, /* Framework bus number */
675                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
676                 .platform_data = &bfin_spi_flash_data,
677                 .controller_data = &spi_flash_chip_info,
678                 .mode = SPI_MODE_3,
679         },
680 #endif
681 #if defined(CONFIG_MTD_DATAFLASH) \
682         || defined(CONFIG_MTD_DATAFLASH_MODULE)
683         {       /* DataFlash chip */
684                 .modalias = "mtd_dataflash",
685                 .max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
686                 .bus_num = 0, /* Framework bus number */
687                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
688                 .platform_data = &bfin_spi_dataflash_data,
689                 .controller_data = &data_flash_chip_info,
690                 .mode = SPI_MODE_3,
691         },
692 #endif
693 #if defined(CONFIG_SPI_ADC_BF533) \
694         || defined(CONFIG_SPI_ADC_BF533_MODULE)
695         {
696                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
697                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
698                 .bus_num = 0, /* Framework bus number */
699                 .chip_select = 1, /* Framework chip select. */
700                 .platform_data = NULL, /* No spi_driver specific config */
701                 .controller_data = &spi_adc_chip_info,
702         },
703 #endif
704
705 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
706         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
707         {
708                 .modalias = "ad1836-spi",
709                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
710                 .bus_num = 0,
711                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
712                 .controller_data = &ad1836_spi_chip_info,
713         },
714 #endif
715 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
716         {
717                 .modalias = "ad9960-spi",
718                 .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
719                 .bus_num = 0,
720                 .chip_select = 1,
721                 .controller_data = &ad9960_spi_chip_info,
722         },
723 #endif
724 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
725         {
726                 .modalias = "mmc_spi",
727                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
728                 .bus_num = 0,
729                 .chip_select = 4,
730                 .platform_data = &bfin_mmc_spi_pdata,
731                 .controller_data = &mmc_spi_chip_info,
732                 .mode = SPI_MODE_3,
733         },
734 #endif
735 #if defined(CONFIG_PBX)
736         {
737                 .modalias = "fxs-spi",
738                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
739                 .bus_num = 0,
740                 .chip_select = 8 - CONFIG_J11_JUMPER,
741                 .controller_data = &spi_si3xxx_chip_info,
742                 .mode = SPI_MODE_3,
743         },
744         {
745                 .modalias = "fxo-spi",
746                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
747                 .bus_num = 0,
748                 .chip_select = 8 - CONFIG_J19_JUMPER,
749                 .controller_data = &spi_si3xxx_chip_info,
750                 .mode = SPI_MODE_3,
751         },
752 #endif
753 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
754         {
755                 .modalias               = "ad7877",
756                 .platform_data          = &bfin_ad7877_ts_info,
757                 .irq                    = IRQ_PF6,
758                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
759                 .bus_num        = 0,
760                 .chip_select  = 1,
761                 .controller_data = &spi_ad7877_chip_info,
762         },
763 #endif
764 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
765         {
766                 .modalias = "ad7879",
767                 .platform_data = &bfin_ad7879_ts_info,
768                 .irq = IRQ_PF7,
769                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
770                 .bus_num = 0,
771                 .chip_select = 1,
772                 .controller_data = &spi_ad7879_chip_info,
773                 .mode = SPI_CPHA | SPI_CPOL,
774         },
775 #endif
776 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
777         {
778                 .modalias = "spidev",
779                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
780                 .bus_num = 0,
781                 .chip_select = 1,
782                 .controller_data = &spidev_chip_info,
783         },
784 #endif
785 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
786         {
787                 .modalias = "bfin-lq035q1-spi",
788                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
789                 .bus_num = 0,
790                 .chip_select = 2,
791                 .controller_data = &lq035q1_spi_chip_info,
792                 .mode = SPI_CPHA | SPI_CPOL,
793         },
794 #endif
795 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
796         {
797                 .modalias = "enc28j60",
798                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
799                 .irq = IRQ_PF6,
800                 .bus_num = 0,
801                 .chip_select = 0,       /* GPIO controlled SSEL */
802                 .controller_data = &enc28j60_spi_chip_info,
803                 .mode = SPI_MODE_0,
804         },
805 #endif
806 };
807
808 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
809 /* SPI controller data */
810 static struct bfin5xx_spi_master bfin_spi0_info = {
811         .num_chipselect = 8,
812         .enable_dma = 1,  /* master has the ability to do dma transfer */
813         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
814 };
815
816 /* SPI (0) */
817 static struct resource bfin_spi0_resource[] = {
818         [0] = {
819                 .start = SPI0_REGBASE,
820                 .end   = SPI0_REGBASE + 0xFF,
821                 .flags = IORESOURCE_MEM,
822                 },
823         [1] = {
824                 .start = CH_SPI,
825                 .end   = CH_SPI,
826                 .flags = IORESOURCE_IRQ,
827         },
828 };
829
830 static struct platform_device bfin_spi0_device = {
831         .name = "bfin-spi",
832         .id = 0, /* Bus number */
833         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
834         .resource = bfin_spi0_resource,
835         .dev = {
836                 .platform_data = &bfin_spi0_info, /* Passed to driver */
837         },
838 };
839 #endif  /* spi master and devices */
840
841 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
842 static struct platform_device bfin_fb_device = {
843         .name = "bf537-lq035",
844 };
845 #endif
846
847 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
848 static struct platform_device bfin_fb_adv7393_device = {
849         .name = "bfin-adv7393",
850 };
851 #endif
852
853 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
854 #include <asm/bfin-lq035q1.h>
855
856 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
857         .mode =         LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
858         .use_bl =       0,      /* let something else control the LCD Blacklight */
859         .gpio_bl =      GPIO_PF7,
860 };
861
862 static struct resource bfin_lq035q1_resources[] = {
863         {
864                 .start = IRQ_PPI_ERROR,
865                 .end = IRQ_PPI_ERROR,
866                 .flags = IORESOURCE_IRQ,
867         },
868 };
869
870 static struct platform_device bfin_lq035q1_device = {
871         .name           = "bfin-lq035q1",
872         .id             = -1,
873         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
874         .resource       = bfin_lq035q1_resources,
875         .dev            = {
876                 .platform_data = &bfin_lq035q1_data,
877         },
878 };
879 #endif
880
881 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
882 static struct resource bfin_uart_resources[] = {
883 #ifdef CONFIG_SERIAL_BFIN_UART0
884         {
885                 .start = 0xFFC00400,
886                 .end = 0xFFC004FF,
887                 .flags = IORESOURCE_MEM,
888         },
889 #endif
890 #ifdef CONFIG_SERIAL_BFIN_UART1
891         {
892                 .start = 0xFFC02000,
893                 .end = 0xFFC020FF,
894                 .flags = IORESOURCE_MEM,
895         },
896 #endif
897 };
898
899 static struct platform_device bfin_uart_device = {
900         .name = "bfin-uart",
901         .id = 1,
902         .num_resources = ARRAY_SIZE(bfin_uart_resources),
903         .resource = bfin_uart_resources,
904 };
905 #endif
906
907 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
908 #ifdef CONFIG_BFIN_SIR0
909 static struct resource bfin_sir0_resources[] = {
910         {
911                 .start = 0xFFC00400,
912                 .end = 0xFFC004FF,
913                 .flags = IORESOURCE_MEM,
914         },
915         {
916                 .start = IRQ_UART0_RX,
917                 .end = IRQ_UART0_RX+1,
918                 .flags = IORESOURCE_IRQ,
919         },
920         {
921                 .start = CH_UART0_RX,
922                 .end = CH_UART0_RX+1,
923                 .flags = IORESOURCE_DMA,
924         },
925 };
926
927 static struct platform_device bfin_sir0_device = {
928         .name = "bfin_sir",
929         .id = 0,
930         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
931         .resource = bfin_sir0_resources,
932 };
933 #endif
934 #ifdef CONFIG_BFIN_SIR1
935 static struct resource bfin_sir1_resources[] = {
936         {
937                 .start = 0xFFC02000,
938                 .end = 0xFFC020FF,
939                 .flags = IORESOURCE_MEM,
940         },
941         {
942                 .start = IRQ_UART1_RX,
943                 .end = IRQ_UART1_RX+1,
944                 .flags = IORESOURCE_IRQ,
945         },
946         {
947                 .start = CH_UART1_RX,
948                 .end = CH_UART1_RX+1,
949                 .flags = IORESOURCE_DMA,
950         },
951 };
952
953 static struct platform_device bfin_sir1_device = {
954         .name = "bfin_sir",
955         .id = 1,
956         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
957         .resource = bfin_sir1_resources,
958 };
959 #endif
960 #endif
961
962 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
963 static struct resource bfin_twi0_resource[] = {
964         [0] = {
965                 .start = TWI0_REGBASE,
966                 .end   = TWI0_REGBASE,
967                 .flags = IORESOURCE_MEM,
968         },
969         [1] = {
970                 .start = IRQ_TWI,
971                 .end   = IRQ_TWI,
972                 .flags = IORESOURCE_IRQ,
973         },
974 };
975
976 static struct platform_device i2c_bfin_twi_device = {
977         .name = "i2c-bfin-twi",
978         .id = 0,
979         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
980         .resource = bfin_twi0_resource,
981 };
982 #endif
983
984 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
985 #include <linux/input.h>
986 #include <linux/i2c/adp5588_keys.h>
987 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
988         [0]      = KEY_GRAVE,
989         [1]      = KEY_1,
990         [2]      = KEY_2,
991         [3]      = KEY_3,
992         [4]      = KEY_4,
993         [5]      = KEY_5,
994         [6]      = KEY_6,
995         [7]      = KEY_7,
996         [8]      = KEY_8,
997         [9]      = KEY_9,
998         [10]     = KEY_0,
999         [11]     = KEY_MINUS,
1000         [12]     = KEY_EQUAL,
1001         [13]     = KEY_BACKSLASH,
1002         [15]     = KEY_KP0,
1003         [16]     = KEY_Q,
1004         [17]     = KEY_W,
1005         [18]     = KEY_E,
1006         [19]     = KEY_R,
1007         [20]     = KEY_T,
1008         [21]     = KEY_Y,
1009         [22]     = KEY_U,
1010         [23]     = KEY_I,
1011         [24]     = KEY_O,
1012         [25]     = KEY_P,
1013         [26]     = KEY_LEFTBRACE,
1014         [27]     = KEY_RIGHTBRACE,
1015         [29]     = KEY_KP1,
1016         [30]     = KEY_KP2,
1017         [31]     = KEY_KP3,
1018         [32]     = KEY_A,
1019         [33]     = KEY_S,
1020         [34]     = KEY_D,
1021         [35]     = KEY_F,
1022         [36]     = KEY_G,
1023         [37]     = KEY_H,
1024         [38]     = KEY_J,
1025         [39]     = KEY_K,
1026         [40]     = KEY_L,
1027         [41]     = KEY_SEMICOLON,
1028         [42]     = KEY_APOSTROPHE,
1029         [43]     = KEY_BACKSLASH,
1030         [45]     = KEY_KP4,
1031         [46]     = KEY_KP5,
1032         [47]     = KEY_KP6,
1033         [48]     = KEY_102ND,
1034         [49]     = KEY_Z,
1035         [50]     = KEY_X,
1036         [51]     = KEY_C,
1037         [52]     = KEY_V,
1038         [53]     = KEY_B,
1039         [54]     = KEY_N,
1040         [55]     = KEY_M,
1041         [56]     = KEY_COMMA,
1042         [57]     = KEY_DOT,
1043         [58]     = KEY_SLASH,
1044         [60]     = KEY_KPDOT,
1045         [61]     = KEY_KP7,
1046         [62]     = KEY_KP8,
1047         [63]     = KEY_KP9,
1048         [64]     = KEY_SPACE,
1049         [65]     = KEY_BACKSPACE,
1050         [66]     = KEY_TAB,
1051         [67]     = KEY_KPENTER,
1052         [68]     = KEY_ENTER,
1053         [69]     = KEY_ESC,
1054         [70]     = KEY_DELETE,
1055         [74]     = KEY_KPMINUS,
1056         [76]     = KEY_UP,
1057         [77]     = KEY_DOWN,
1058         [78]     = KEY_RIGHT,
1059         [79]     = KEY_LEFT,
1060 };
1061
1062 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1063         .rows           = 8,
1064         .cols           = 10,
1065         .keymap         = adp5588_keymap,
1066         .keymapsize     = ARRAY_SIZE(adp5588_keymap),
1067         .repeat         = 0,
1068 };
1069 #endif
1070
1071 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
1072 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
1073         {
1074                 I2C_BOARD_INFO("ad7142_joystick", 0x2C),
1075                 .irq = IRQ_PF5,
1076         },
1077 #endif
1078 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
1079         {
1080                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1081         },
1082 #endif
1083 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
1084         {
1085                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1086                 .irq = IRQ_PG6,
1087         },
1088 #endif
1089 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
1090         {
1091                 I2C_BOARD_INFO("ad7879", 0x2F),
1092                 .irq = IRQ_PG5,
1093                 .platform_data = (void *)&bfin_ad7879_ts_info,
1094         },
1095 #endif
1096 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1097         {
1098                 I2C_BOARD_INFO("adp5588-keys", 0x34),
1099                 .irq = IRQ_PG0,
1100                 .platform_data = (void *)&adp5588_kpad_data,
1101         },
1102 #endif
1103 };
1104
1105 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1106 static struct platform_device bfin_sport0_uart_device = {
1107         .name = "bfin-sport-uart",
1108         .id = 0,
1109 };
1110
1111 static struct platform_device bfin_sport1_uart_device = {
1112         .name = "bfin-sport-uart",
1113         .id = 1,
1114 };
1115 #endif
1116
1117 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1118 #define PATA_INT        IRQ_PF5
1119
1120 static struct pata_platform_info bfin_pata_platform_data = {
1121         .ioport_shift = 1,
1122         .irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
1123 };
1124
1125 static struct resource bfin_pata_resources[] = {
1126         {
1127                 .start = 0x20314020,
1128                 .end = 0x2031403F,
1129                 .flags = IORESOURCE_MEM,
1130         },
1131         {
1132                 .start = 0x2031401C,
1133                 .end = 0x2031401F,
1134                 .flags = IORESOURCE_MEM,
1135         },
1136         {
1137                 .start = PATA_INT,
1138                 .end = PATA_INT,
1139                 .flags = IORESOURCE_IRQ,
1140         },
1141 };
1142
1143 static struct platform_device bfin_pata_device = {
1144         .name = "pata_platform",
1145         .id = -1,
1146         .num_resources = ARRAY_SIZE(bfin_pata_resources),
1147         .resource = bfin_pata_resources,
1148         .dev = {
1149                 .platform_data = &bfin_pata_platform_data,
1150         }
1151 };
1152 #endif
1153
1154 static const unsigned int cclk_vlev_datasheet[] =
1155 {
1156         VRPAIR(VLEV_085, 250000000),
1157         VRPAIR(VLEV_090, 376000000),
1158         VRPAIR(VLEV_095, 426000000),
1159         VRPAIR(VLEV_100, 426000000),
1160         VRPAIR(VLEV_105, 476000000),
1161         VRPAIR(VLEV_110, 476000000),
1162         VRPAIR(VLEV_115, 476000000),
1163         VRPAIR(VLEV_120, 500000000),
1164         VRPAIR(VLEV_125, 533000000),
1165         VRPAIR(VLEV_130, 600000000),
1166 };
1167
1168 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1169         .tuple_tab = cclk_vlev_datasheet,
1170         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1171         .vr_settling_time = 25 /* us */,
1172 };
1173
1174 static struct platform_device bfin_dpmc = {
1175         .name = "bfin dpmc",
1176         .dev = {
1177                 .platform_data = &bfin_dmpc_vreg_data,
1178         },
1179 };
1180
1181 static struct platform_device *stamp_devices[] __initdata = {
1182
1183         &bfin_dpmc,
1184
1185 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
1186         &bfin_pcmcia_cf_device,
1187 #endif
1188
1189 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1190         &rtc_device,
1191 #endif
1192
1193 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
1194         &sl811_hcd_device,
1195 #endif
1196
1197 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
1198         &isp1362_hcd_device,
1199 #endif
1200
1201 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1202         &bfin_isp1760_device,
1203 #endif
1204
1205 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
1206         &smc91x_device,
1207 #endif
1208
1209 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
1210         &dm9000_device,
1211 #endif
1212
1213 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
1214         &ax88180_device,
1215 #endif
1216
1217 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
1218         &bfin_mac_device,
1219 #endif
1220
1221 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
1222         &net2272_bfin_device,
1223 #endif
1224
1225 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1226         &bfin_spi0_device,
1227 #endif
1228
1229 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1230         &bfin_fb_device,
1231 #endif
1232
1233 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1234         &bfin_lq035q1_device,
1235 #endif
1236
1237 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
1238         &bfin_fb_adv7393_device,
1239 #endif
1240
1241 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1242         &bfin_uart_device,
1243 #endif
1244
1245 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1246 #ifdef CONFIG_BFIN_SIR0
1247         &bfin_sir0_device,
1248 #endif
1249 #ifdef CONFIG_BFIN_SIR1
1250         &bfin_sir1_device,
1251 #endif
1252 #endif
1253
1254 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1255         &i2c_bfin_twi_device,
1256 #endif
1257
1258 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1259         &bfin_sport0_uart_device,
1260         &bfin_sport1_uart_device,
1261 #endif
1262
1263 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1264         &bfin_pata_device,
1265 #endif
1266
1267 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1268         &bfin_device_gpiokeys,
1269 #endif
1270
1271         &bfin_gpios_device,
1272
1273 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
1274         &bfin_async_nand_device,
1275 #endif
1276
1277 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1278         &stamp_flash_device,
1279 #endif
1280 };
1281
1282 static int __init stamp_init(void)
1283 {
1284         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1285         i2c_register_board_info(0, bfin_i2c_board_info,
1286                                 ARRAY_SIZE(bfin_i2c_board_info));
1287         bfin_plat_nand_init();
1288         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
1289         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1290
1291 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1292         irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
1293 #endif
1294
1295         return 0;
1296 }
1297
1298 arch_initcall(stamp_init);
1299
1300 void native_machine_restart(char *cmd)
1301 {
1302         /* workaround reboot hang when booting from SPI */
1303         if ((bfin_read_SYSCR() & 0x7) == 0x3)
1304                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
1305 }
1306
1307 /*
1308  * Currently the MAC address is saved in Flash by U-Boot
1309  */
1310 #define FLASH_MAC       0x203f0000
1311 void bfin_get_ether_addr(char *addr)
1312 {
1313         *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
1314         *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
1315 }
1316 EXPORT_SYMBOL(bfin_get_ether_addr);