[PATCH] arm-versatile iomem annotations
[linux-2.6.git] / arch / arm / mach-versatile / core.c
1 /*
2  *  linux/arch/arm/mach-versatile/core.c
3  *
4  *  Copyright (C) 1999 - 2003 ARM Limited
5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
20  */
21 #include <linux/init.h>
22 #include <linux/device.h>
23 #include <linux/dma-mapping.h>
24 #include <linux/platform_device.h>
25 #include <linux/sysdev.h>
26 #include <linux/interrupt.h>
27 #include <linux/amba/bus.h>
28 #include <linux/amba/clcd.h>
29
30 #include <asm/system.h>
31 #include <asm/hardware.h>
32 #include <asm/io.h>
33 #include <asm/irq.h>
34 #include <asm/leds.h>
35 #include <asm/hardware/arm_timer.h>
36 #include <asm/hardware/icst307.h>
37 #include <asm/hardware/vic.h>
38 #include <asm/mach-types.h>
39
40 #include <asm/mach/arch.h>
41 #include <asm/mach/flash.h>
42 #include <asm/mach/irq.h>
43 #include <asm/mach/time.h>
44 #include <asm/mach/map.h>
45 #include <asm/mach/mmc.h>
46
47 #include "core.h"
48 #include "clock.h"
49
50 /*
51  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
52  * is the (PA >> 12).
53  *
54  * Setup a VA for the Versatile Vectored Interrupt Controller.
55  */
56 #define __io_address(n)         __io(IO_ADDRESS(n))
57 #define VA_VIC_BASE             __io_address(VERSATILE_VIC_BASE)
58 #define VA_SIC_BASE             __io_address(VERSATILE_SIC_BASE)
59
60 static void sic_mask_irq(unsigned int irq)
61 {
62         irq -= IRQ_SIC_START;
63         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
64 }
65
66 static void sic_unmask_irq(unsigned int irq)
67 {
68         irq -= IRQ_SIC_START;
69         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET);
70 }
71
72 static struct irq_chip sic_chip = {
73         .name   = "SIC",
74         .ack    = sic_mask_irq,
75         .mask   = sic_mask_irq,
76         .unmask = sic_unmask_irq,
77 };
78
79 static void
80 sic_handle_irq(unsigned int irq, struct irqdesc *desc)
81 {
82         unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS);
83
84         if (status == 0) {
85                 do_bad_IRQ(irq, desc);
86                 return;
87         }
88
89         do {
90                 irq = ffs(status) - 1;
91                 status &= ~(1 << irq);
92
93                 irq += IRQ_SIC_START;
94
95                 desc = irq_desc + irq;
96                 desc_handle_irq(irq, desc);
97         } while (status);
98 }
99
100 #if 1
101 #define IRQ_MMCI0A      IRQ_VICSOURCE22
102 #define IRQ_AACI        IRQ_VICSOURCE24
103 #define IRQ_ETH         IRQ_VICSOURCE25
104 #define PIC_MASK        0xFFD00000
105 #else
106 #define IRQ_MMCI0A      IRQ_SIC_MMCI0A
107 #define IRQ_AACI        IRQ_SIC_AACI
108 #define IRQ_ETH         IRQ_SIC_ETH
109 #define PIC_MASK        0
110 #endif
111
112 void __init versatile_init_irq(void)
113 {
114         unsigned int i;
115
116         vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
117
118         set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
119
120         /* Do second interrupt controller */
121         writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
122
123         for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) {
124                 if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) {
125                         set_irq_chip(i, &sic_chip);
126                         set_irq_handler(i, do_level_IRQ);
127                         set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
128                 }
129         }
130
131         /*
132          * Interrupts on secondary controller from 0 to 8 are routed to
133          * source 31 on PIC.
134          * Interrupts from 21 to 31 are routed directly to the VIC on
135          * the corresponding number on primary controller. This is controlled
136          * by setting PIC_ENABLEx.
137          */
138         writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
139 }
140
141 static struct map_desc versatile_io_desc[] __initdata = {
142         {
143                 .virtual        =  IO_ADDRESS(VERSATILE_SYS_BASE),
144                 .pfn            = __phys_to_pfn(VERSATILE_SYS_BASE),
145                 .length         = SZ_4K,
146                 .type           = MT_DEVICE
147         }, {
148                 .virtual        =  IO_ADDRESS(VERSATILE_SIC_BASE),
149                 .pfn            = __phys_to_pfn(VERSATILE_SIC_BASE),
150                 .length         = SZ_4K,
151                 .type           = MT_DEVICE
152         }, {
153                 .virtual        =  IO_ADDRESS(VERSATILE_VIC_BASE),
154                 .pfn            = __phys_to_pfn(VERSATILE_VIC_BASE),
155                 .length         = SZ_4K,
156                 .type           = MT_DEVICE
157         }, {
158                 .virtual        =  IO_ADDRESS(VERSATILE_SCTL_BASE),
159                 .pfn            = __phys_to_pfn(VERSATILE_SCTL_BASE),
160                 .length         = SZ_4K * 9,
161                 .type           = MT_DEVICE
162         },
163 #ifdef CONFIG_MACH_VERSATILE_AB
164         {
165                 .virtual        =  IO_ADDRESS(VERSATILE_GPIO0_BASE),
166                 .pfn            = __phys_to_pfn(VERSATILE_GPIO0_BASE),
167                 .length         = SZ_4K,
168                 .type           = MT_DEVICE
169         }, {
170                 .virtual        =  IO_ADDRESS(VERSATILE_IB2_BASE),
171                 .pfn            = __phys_to_pfn(VERSATILE_IB2_BASE),
172                 .length         = SZ_64M,
173                 .type           = MT_DEVICE
174         },
175 #endif
176 #ifdef CONFIG_DEBUG_LL
177         {
178                 .virtual        =  IO_ADDRESS(VERSATILE_UART0_BASE),
179                 .pfn            = __phys_to_pfn(VERSATILE_UART0_BASE),
180                 .length         = SZ_4K,
181                 .type           = MT_DEVICE
182         },
183 #endif
184 #ifdef CONFIG_PCI
185         {
186                 .virtual        =  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
187                 .pfn            = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
188                 .length         = SZ_4K,
189                 .type           = MT_DEVICE
190         }, {
191                 .virtual        =  (unsigned long)VERSATILE_PCI_VIRT_BASE,
192                 .pfn            = __phys_to_pfn(VERSATILE_PCI_BASE),
193                 .length         = VERSATILE_PCI_BASE_SIZE,
194                 .type           = MT_DEVICE
195         }, {
196                 .virtual        =  (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
197                 .pfn            = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
198                 .length         = VERSATILE_PCI_CFG_BASE_SIZE,
199                 .type           = MT_DEVICE
200         },
201 #if 0
202         {
203                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE0,
204                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
205                 .length         = SZ_16M,
206                 .type           = MT_DEVICE
207         }, {
208                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE1,
209                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
210                 .length         = SZ_16M,
211                 .type           = MT_DEVICE
212         }, {
213                 .virtual        =  VERSATILE_PCI_VIRT_MEM_BASE2,
214                 .pfn            = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
215                 .length         = SZ_16M,
216                 .type           = MT_DEVICE
217         },
218 #endif
219 #endif
220 };
221
222 void __init versatile_map_io(void)
223 {
224         iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
225 }
226
227 #define VERSATILE_REFCOUNTER    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
228
229 /*
230  * This is the Versatile sched_clock implementation.  This has
231  * a resolution of 41.7ns, and a maximum value of about 179s.
232  */
233 unsigned long long sched_clock(void)
234 {
235         unsigned long long v;
236
237         v = (unsigned long long)readl(VERSATILE_REFCOUNTER) * 125;
238         do_div(v, 3);
239
240         return v;
241 }
242
243
244 #define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
245
246 static int versatile_flash_init(void)
247 {
248         u32 val;
249
250         val = __raw_readl(VERSATILE_FLASHCTRL);
251         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
252         __raw_writel(val, VERSATILE_FLASHCTRL);
253
254         return 0;
255 }
256
257 static void versatile_flash_exit(void)
258 {
259         u32 val;
260
261         val = __raw_readl(VERSATILE_FLASHCTRL);
262         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
263         __raw_writel(val, VERSATILE_FLASHCTRL);
264 }
265
266 static void versatile_flash_set_vpp(int on)
267 {
268         u32 val;
269
270         val = __raw_readl(VERSATILE_FLASHCTRL);
271         if (on)
272                 val |= VERSATILE_FLASHPROG_FLVPPEN;
273         else
274                 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
275         __raw_writel(val, VERSATILE_FLASHCTRL);
276 }
277
278 static struct flash_platform_data versatile_flash_data = {
279         .map_name               = "cfi_probe",
280         .width                  = 4,
281         .init                   = versatile_flash_init,
282         .exit                   = versatile_flash_exit,
283         .set_vpp                = versatile_flash_set_vpp,
284 };
285
286 static struct resource versatile_flash_resource = {
287         .start                  = VERSATILE_FLASH_BASE,
288         .end                    = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
289         .flags                  = IORESOURCE_MEM,
290 };
291
292 static struct platform_device versatile_flash_device = {
293         .name                   = "armflash",
294         .id                     = 0,
295         .dev                    = {
296                 .platform_data  = &versatile_flash_data,
297         },
298         .num_resources          = 1,
299         .resource               = &versatile_flash_resource,
300 };
301
302 static struct resource smc91x_resources[] = {
303         [0] = {
304                 .start          = VERSATILE_ETH_BASE,
305                 .end            = VERSATILE_ETH_BASE + SZ_64K - 1,
306                 .flags          = IORESOURCE_MEM,
307         },
308         [1] = {
309                 .start          = IRQ_ETH,
310                 .end            = IRQ_ETH,
311                 .flags          = IORESOURCE_IRQ,
312         },
313 };
314
315 static struct platform_device smc91x_device = {
316         .name           = "smc91x",
317         .id             = 0,
318         .num_resources  = ARRAY_SIZE(smc91x_resources),
319         .resource       = smc91x_resources,
320 };
321
322 #define VERSATILE_SYSMCI        (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
323
324 unsigned int mmc_status(struct device *dev)
325 {
326         struct amba_device *adev = container_of(dev, struct amba_device, dev);
327         u32 mask;
328
329         if (adev->res.start == VERSATILE_MMCI0_BASE)
330                 mask = 1;
331         else
332                 mask = 2;
333
334         return readl(VERSATILE_SYSMCI) & mask;
335 }
336
337 static struct mmc_platform_data mmc0_plat_data = {
338         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
339         .status         = mmc_status,
340 };
341
342 /*
343  * Clock handling
344  */
345 static const struct icst307_params versatile_oscvco_params = {
346         .ref            = 24000,
347         .vco_max        = 200000,
348         .vd_min         = 4 + 8,
349         .vd_max         = 511 + 8,
350         .rd_min         = 1 + 2,
351         .rd_max         = 127 + 2,
352 };
353
354 static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
355 {
356         void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
357         void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET;
358         u32 val;
359
360         val = readl(sys_osc) & ~0x7ffff;
361         val |= vco.v | (vco.r << 9) | (vco.s << 16);
362
363         writel(0xa05f, sys_lock);
364         writel(val, sys_osc);
365         writel(0, sys_lock);
366 }
367
368 static struct clk versatile_clcd_clk = {
369         .name   = "CLCDCLK",
370         .params = &versatile_oscvco_params,
371         .setvco = versatile_oscvco_set,
372 };
373
374 /*
375  * CLCD support.
376  */
377 #define SYS_CLCD_MODE_MASK      (3 << 0)
378 #define SYS_CLCD_MODE_888       (0 << 0)
379 #define SYS_CLCD_MODE_5551      (1 << 0)
380 #define SYS_CLCD_MODE_565_RLSB  (2 << 0)
381 #define SYS_CLCD_MODE_565_BLSB  (3 << 0)
382 #define SYS_CLCD_NLCDIOON       (1 << 2)
383 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
384 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
385 #define SYS_CLCD_ID_MASK        (0x1f << 8)
386 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
387 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
388 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
389 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
390 #define SYS_CLCD_ID_VGA         (0x1f << 8)
391
392 static struct clcd_panel vga = {
393         .mode           = {
394                 .name           = "VGA",
395                 .refresh        = 60,
396                 .xres           = 640,
397                 .yres           = 480,
398                 .pixclock       = 39721,
399                 .left_margin    = 40,
400                 .right_margin   = 24,
401                 .upper_margin   = 32,
402                 .lower_margin   = 11,
403                 .hsync_len      = 96,
404                 .vsync_len      = 2,
405                 .sync           = 0,
406                 .vmode          = FB_VMODE_NONINTERLACED,
407         },
408         .width          = -1,
409         .height         = -1,
410         .tim2           = TIM2_BCD | TIM2_IPC,
411         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
412         .bpp            = 16,
413 };
414
415 static struct clcd_panel sanyo_3_8_in = {
416         .mode           = {
417                 .name           = "Sanyo QVGA",
418                 .refresh        = 116,
419                 .xres           = 320,
420                 .yres           = 240,
421                 .pixclock       = 100000,
422                 .left_margin    = 6,
423                 .right_margin   = 6,
424                 .upper_margin   = 5,
425                 .lower_margin   = 5,
426                 .hsync_len      = 6,
427                 .vsync_len      = 6,
428                 .sync           = 0,
429                 .vmode          = FB_VMODE_NONINTERLACED,
430         },
431         .width          = -1,
432         .height         = -1,
433         .tim2           = TIM2_BCD,
434         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
435         .bpp            = 16,
436 };
437
438 static struct clcd_panel sanyo_2_5_in = {
439         .mode           = {
440                 .name           = "Sanyo QVGA Portrait",
441                 .refresh        = 116,
442                 .xres           = 240,
443                 .yres           = 320,
444                 .pixclock       = 100000,
445                 .left_margin    = 20,
446                 .right_margin   = 10,
447                 .upper_margin   = 2,
448                 .lower_margin   = 2,
449                 .hsync_len      = 10,
450                 .vsync_len      = 2,
451                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
452                 .vmode          = FB_VMODE_NONINTERLACED,
453         },
454         .width          = -1,
455         .height         = -1,
456         .tim2           = TIM2_IVS | TIM2_IHS | TIM2_IPC,
457         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
458         .bpp            = 16,
459 };
460
461 static struct clcd_panel epson_2_2_in = {
462         .mode           = {
463                 .name           = "Epson QCIF",
464                 .refresh        = 390,
465                 .xres           = 176,
466                 .yres           = 220,
467                 .pixclock       = 62500,
468                 .left_margin    = 3,
469                 .right_margin   = 2,
470                 .upper_margin   = 1,
471                 .lower_margin   = 0,
472                 .hsync_len      = 3,
473                 .vsync_len      = 2,
474                 .sync           = 0,
475                 .vmode          = FB_VMODE_NONINTERLACED,
476         },
477         .width          = -1,
478         .height         = -1,
479         .tim2           = TIM2_BCD | TIM2_IPC,
480         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
481         .bpp            = 16,
482 };
483
484 /*
485  * Detect which LCD panel is connected, and return the appropriate
486  * clcd_panel structure.  Note: we do not have any information on
487  * the required timings for the 8.4in panel, so we presently assume
488  * VGA timings.
489  */
490 static struct clcd_panel *versatile_clcd_panel(void)
491 {
492         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
493         struct clcd_panel *panel = &vga;
494         u32 val;
495
496         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
497         if (val == SYS_CLCD_ID_SANYO_3_8)
498                 panel = &sanyo_3_8_in;
499         else if (val == SYS_CLCD_ID_SANYO_2_5)
500                 panel = &sanyo_2_5_in;
501         else if (val == SYS_CLCD_ID_EPSON_2_2)
502                 panel = &epson_2_2_in;
503         else if (val == SYS_CLCD_ID_VGA)
504                 panel = &vga;
505         else {
506                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
507                         val);
508                 panel = &vga;
509         }
510
511         return panel;
512 }
513
514 /*
515  * Disable all display connectors on the interface module.
516  */
517 static void versatile_clcd_disable(struct clcd_fb *fb)
518 {
519         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
520         u32 val;
521
522         val = readl(sys_clcd);
523         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
524         writel(val, sys_clcd);
525
526 #ifdef CONFIG_MACH_VERSATILE_AB
527         /*
528          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
529          */
530         if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
531                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
532                 unsigned long ctrl;
533
534                 ctrl = readl(versatile_ib2_ctrl);
535                 ctrl &= ~0x01;
536                 writel(ctrl, versatile_ib2_ctrl);
537         }
538 #endif
539 }
540
541 /*
542  * Enable the relevant connector on the interface module.
543  */
544 static void versatile_clcd_enable(struct clcd_fb *fb)
545 {
546         void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
547         u32 val;
548
549         val = readl(sys_clcd);
550         val &= ~SYS_CLCD_MODE_MASK;
551
552         switch (fb->fb.var.green.length) {
553         case 5:
554                 val |= SYS_CLCD_MODE_5551;
555                 break;
556         case 6:
557                 val |= SYS_CLCD_MODE_565_RLSB;
558                 break;
559         case 8:
560                 val |= SYS_CLCD_MODE_888;
561                 break;
562         }
563
564         /*
565          * Set the MUX
566          */
567         writel(val, sys_clcd);
568
569         /*
570          * And now enable the PSUs
571          */
572         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
573         writel(val, sys_clcd);
574
575 #ifdef CONFIG_MACH_VERSATILE_AB
576         /*
577          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
578          */
579         if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
580                 void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
581                 unsigned long ctrl;
582
583                 ctrl = readl(versatile_ib2_ctrl);
584                 ctrl |= 0x01;
585                 writel(ctrl, versatile_ib2_ctrl);
586         }
587 #endif
588 }
589
590 static unsigned long framesize = SZ_1M;
591
592 static int versatile_clcd_setup(struct clcd_fb *fb)
593 {
594         dma_addr_t dma;
595
596         fb->panel               = versatile_clcd_panel();
597
598         fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
599                                                     &dma, GFP_KERNEL);
600         if (!fb->fb.screen_base) {
601                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
602                 return -ENOMEM;
603         }
604
605         fb->fb.fix.smem_start   = dma;
606         fb->fb.fix.smem_len     = framesize;
607
608         return 0;
609 }
610
611 static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
612 {
613         return dma_mmap_writecombine(&fb->dev->dev, vma,
614                                      fb->fb.screen_base,
615                                      fb->fb.fix.smem_start,
616                                      fb->fb.fix.smem_len);
617 }
618
619 static void versatile_clcd_remove(struct clcd_fb *fb)
620 {
621         dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
622                               fb->fb.screen_base, fb->fb.fix.smem_start);
623 }
624
625 static struct clcd_board clcd_plat_data = {
626         .name           = "Versatile",
627         .check          = clcdfb_check,
628         .decode         = clcdfb_decode,
629         .disable        = versatile_clcd_disable,
630         .enable         = versatile_clcd_enable,
631         .setup          = versatile_clcd_setup,
632         .mmap           = versatile_clcd_mmap,
633         .remove         = versatile_clcd_remove,
634 };
635
636 #define AACI_IRQ        { IRQ_AACI, NO_IRQ }
637 #define AACI_DMA        { 0x80, 0x81 }
638 #define MMCI0_IRQ       { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
639 #define MMCI0_DMA       { 0x84, 0 }
640 #define KMI0_IRQ        { IRQ_SIC_KMI0, NO_IRQ }
641 #define KMI0_DMA        { 0, 0 }
642 #define KMI1_IRQ        { IRQ_SIC_KMI1, NO_IRQ }
643 #define KMI1_DMA        { 0, 0 }
644
645 /*
646  * These devices are connected directly to the multi-layer AHB switch
647  */
648 #define SMC_IRQ         { NO_IRQ, NO_IRQ }
649 #define SMC_DMA         { 0, 0 }
650 #define MPMC_IRQ        { NO_IRQ, NO_IRQ }
651 #define MPMC_DMA        { 0, 0 }
652 #define CLCD_IRQ        { IRQ_CLCDINT, NO_IRQ }
653 #define CLCD_DMA        { 0, 0 }
654 #define DMAC_IRQ        { IRQ_DMAINT, NO_IRQ }
655 #define DMAC_DMA        { 0, 0 }
656
657 /*
658  * These devices are connected via the core APB bridge
659  */
660 #define SCTL_IRQ        { NO_IRQ, NO_IRQ }
661 #define SCTL_DMA        { 0, 0 }
662 #define WATCHDOG_IRQ    { IRQ_WDOGINT, NO_IRQ }
663 #define WATCHDOG_DMA    { 0, 0 }
664 #define GPIO0_IRQ       { IRQ_GPIOINT0, NO_IRQ }
665 #define GPIO0_DMA       { 0, 0 }
666 #define GPIO1_IRQ       { IRQ_GPIOINT1, NO_IRQ }
667 #define GPIO1_DMA       { 0, 0 }
668 #define RTC_IRQ         { IRQ_RTCINT, NO_IRQ }
669 #define RTC_DMA         { 0, 0 }
670
671 /*
672  * These devices are connected via the DMA APB bridge
673  */
674 #define SCI_IRQ         { IRQ_SCIINT, NO_IRQ }
675 #define SCI_DMA         { 7, 6 }
676 #define UART0_IRQ       { IRQ_UARTINT0, NO_IRQ }
677 #define UART0_DMA       { 15, 14 }
678 #define UART1_IRQ       { IRQ_UARTINT1, NO_IRQ }
679 #define UART1_DMA       { 13, 12 }
680 #define UART2_IRQ       { IRQ_UARTINT2, NO_IRQ }
681 #define UART2_DMA       { 11, 10 }
682 #define SSP_IRQ         { IRQ_SSPINT, NO_IRQ }
683 #define SSP_DMA         { 9, 8 }
684
685 /* FPGA Primecells */
686 AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
687 AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
688 AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
689 AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
690
691 /* DevChip Primecells */
692 AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
693 AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
694 AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
695 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
696 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
697 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
698 AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
699 AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
700 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
701 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
702 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
703 AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
704 AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
705 AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
706
707 static struct amba_device *amba_devs[] __initdata = {
708         &dmac_device,
709         &uart0_device,
710         &uart1_device,
711         &uart2_device,
712         &smc_device,
713         &mpmc_device,
714         &clcd_device,
715         &sctl_device,
716         &wdog_device,
717         &gpio0_device,
718         &gpio1_device,
719         &rtc_device,
720         &sci0_device,
721         &ssp0_device,
722         &aaci_device,
723         &mmc0_device,
724         &kmi0_device,
725         &kmi1_device,
726 };
727
728 #ifdef CONFIG_LEDS
729 #define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
730
731 static void versatile_leds_event(led_event_t ledevt)
732 {
733         unsigned long flags;
734         u32 val;
735
736         local_irq_save(flags);
737         val = readl(VA_LEDS_BASE);
738
739         switch (ledevt) {
740         case led_idle_start:
741                 val = val & ~VERSATILE_SYS_LED0;
742                 break;
743
744         case led_idle_end:
745                 val = val | VERSATILE_SYS_LED0;
746                 break;
747
748         case led_timer:
749                 val = val ^ VERSATILE_SYS_LED1;
750                 break;
751
752         case led_halted:
753                 val = 0;
754                 break;
755
756         default:
757                 break;
758         }
759
760         writel(val, VA_LEDS_BASE);
761         local_irq_restore(flags);
762 }
763 #endif  /* CONFIG_LEDS */
764
765 void __init versatile_init(void)
766 {
767         int i;
768
769         clk_register(&versatile_clcd_clk);
770
771         platform_device_register(&versatile_flash_device);
772         platform_device_register(&smc91x_device);
773
774         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
775                 struct amba_device *d = amba_devs[i];
776                 amba_device_register(d, &iomem_resource);
777         }
778
779 #ifdef CONFIG_LEDS
780         leds_event = versatile_leds_event;
781 #endif
782 }
783
784 /*
785  * Where is the timer (VA)?
786  */
787 #define TIMER0_VA_BASE           __io_address(VERSATILE_TIMER0_1_BASE)
788 #define TIMER1_VA_BASE          (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
789 #define TIMER2_VA_BASE           __io_address(VERSATILE_TIMER2_3_BASE)
790 #define TIMER3_VA_BASE          (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
791 #define VA_IC_BASE               __io_address(VERSATILE_VIC_BASE) 
792
793 /*
794  * How long is the timer interval?
795  */
796 #define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
797 #if TIMER_INTERVAL >= 0x100000
798 #define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
799 #define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
800 #define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
801 #elif TIMER_INTERVAL >= 0x10000
802 #define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
803 #define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
804 #define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
805 #else
806 #define TIMER_RELOAD    (TIMER_INTERVAL)
807 #define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
808 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
809 #endif
810
811 /*
812  * Returns number of ms since last clock interrupt.  Note that interrupts
813  * will have been disabled by do_gettimeoffset()
814  */
815 static unsigned long versatile_gettimeoffset(void)
816 {
817         unsigned long ticks1, ticks2, status;
818
819         /*
820          * Get the current number of ticks.  Note that there is a race
821          * condition between us reading the timer and checking for
822          * an interrupt.  We get around this by ensuring that the
823          * counter has not reloaded between our two reads.
824          */
825         ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
826         do {
827                 ticks1 = ticks2;
828                 status = __raw_readl(VA_IC_BASE + VIC_RAW_STATUS);
829                 ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
830         } while (ticks2 > ticks1);
831
832         /*
833          * Number of ticks since last interrupt.
834          */
835         ticks1 = TIMER_RELOAD - ticks2;
836
837         /*
838          * Interrupt pending?  If so, we've reloaded once already.
839          *
840          * FIXME: Need to check this is effectively timer 0 that expires
841          */
842         if (status & IRQMASK_TIMERINT0_1)
843                 ticks1 += TIMER_RELOAD;
844
845         /*
846          * Convert the ticks to usecs
847          */
848         return TICKS2USECS(ticks1);
849 }
850
851 /*
852  * IRQ handler for the timer
853  */
854 static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id)
855 {
856         write_seqlock(&xtime_lock);
857
858         // ...clear the interrupt
859         writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
860
861         timer_tick();
862
863         write_sequnlock(&xtime_lock);
864
865         return IRQ_HANDLED;
866 }
867
868 static struct irqaction versatile_timer_irq = {
869         .name           = "Versatile Timer Tick",
870         .flags          = IRQF_DISABLED | IRQF_TIMER,
871         .handler        = versatile_timer_interrupt,
872 };
873
874 /*
875  * Set up timer interrupt, and return the current time in seconds.
876  */
877 static void __init versatile_timer_init(void)
878 {
879         u32 val;
880
881         /* 
882          * set clock frequency: 
883          *      VERSATILE_REFCLK is 32KHz
884          *      VERSATILE_TIMCLK is 1MHz
885          */
886         val = readl(__io_address(VERSATILE_SCTL_BASE));
887         writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
888                (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
889                (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
890                (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
891                __io_address(VERSATILE_SCTL_BASE));
892
893         /*
894          * Initialise to a known state (all timers off)
895          */
896         writel(0, TIMER0_VA_BASE + TIMER_CTRL);
897         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
898         writel(0, TIMER2_VA_BASE + TIMER_CTRL);
899         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
900
901         writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
902         writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
903         writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
904                TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
905
906         /* 
907          * Make irqs happen for the system timer
908          */
909         setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
910 }
911
912 struct sys_timer versatile_timer = {
913         .init           = versatile_timer_init,
914         .offset         = versatile_gettimeoffset,
915 };