ARM: tegra: cardhu: fix 5650 power on sequence
[linux-2.6.git] / arch / arm / mach-tegra / board-cardhu-sensors.c
1 /*
2  * arch/arm/mach-tegra/board-cardhu-sensors.c
3  *
4  * Copyright (c) 2010-2011, NVIDIA CORPORATION, All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are
8  * met:
9  *
10  * Redistributions of source code must retain the above copyright notice,
11  * this list of conditions and the following disclaimer.
12  *
13  * Redistributions in binary form must reproduce the above copyright
14  * notice, this list of conditions and the following disclaimer in the
15  * documentation and/or other materials provided with the distribution.
16  *
17  * Neither the name of NVIDIA CORPORATION nor the names of its contributors
18  * may be used to endorse or promote products derived from this software
19  * without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
22  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
23  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
24  * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25  * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
27  * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
28  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
29  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
30  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
31  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  */
33
34 #include <linux/i2c.h>
35 #include <linux/delay.h>
36 #include <linux/regulator/consumer.h>
37 #include <linux/i2c/pca954x.h>
38 #include <linux/i2c/pca953x.h>
39 #include <linux/nct1008.h>
40 #include <mach/fb.h>
41 #include <mach/gpio.h>
42 #include <media/ov5650.h>
43 #include <media/ov14810.h>
44 #include <media/ov2710.h>
45 #include <media/tps61050.h>
46 #include <generated/mach-types.h>
47 #include "gpio-names.h"
48 #include "board.h"
49 #include <linux/mpu.h>
50 #include <media/sh532u.h>
51 #include <linux/bq27x00.h>
52 #include <mach/gpio.h>
53 #include <mach/edp.h>
54 #include <mach/thermal.h>
55
56 #include "gpio-names.h"
57 #include "board-cardhu.h"
58 #include "cpu-tegra.h"
59
60 static struct regulator *cardhu_1v8_cam1 = NULL;
61 static struct regulator *cardhu_1v8_cam2 = NULL;
62 static struct regulator *cardhu_1v8_cam3 = NULL;
63 static struct regulator *cardhu_vdd_2v8_cam1 = NULL;
64 static struct regulator *cardhu_vdd_2v8_cam2 = NULL;
65 static struct regulator *cardhu_vdd_cam3 = NULL;
66
67 static struct board_info board_info;
68
69 static struct pca954x_platform_mode cardhu_pca954x_modes[] = {
70         { .adap_id = PCA954x_I2C_BUS0, .deselect_on_exit = true, },
71         { .adap_id = PCA954x_I2C_BUS1, .deselect_on_exit = true, },
72         { .adap_id = PCA954x_I2C_BUS2, .deselect_on_exit = true, },
73         { .adap_id = PCA954x_I2C_BUS3, .deselect_on_exit = true, },
74 };
75
76 static struct pca954x_platform_data cardhu_pca954x_data = {
77         .modes    = cardhu_pca954x_modes,
78         .num_modes      = ARRAY_SIZE(cardhu_pca954x_modes),
79 };
80
81 static int cardhu_camera_init(void)
82 {
83         int ret;
84
85         /* Boards E1198 and E1291 are of Cardhu personality
86          * and donot have TCA6416 exp for camera */
87         if ((board_info.board_id == BOARD_E1198) ||
88                 (board_info.board_id == BOARD_E1291)) {
89                 tegra_gpio_enable(CAM1_POWER_DWN_GPIO);
90                 ret = gpio_request(CAM1_POWER_DWN_GPIO, "camera_power_en");
91                 if (ret < 0)
92                         pr_err("%s: gpio_request failed for gpio %s\n",
93                                 __func__, "CAM1_POWER_DWN_GPIO");
94                                 tegra_gpio_enable(CAM3_POWER_DWN_GPIO);
95                 ret = gpio_request(CAM3_POWER_DWN_GPIO, "cam3_power_en");
96                 if (ret < 0)
97                         pr_err("%s: gpio_request failed for gpio %s\n",
98                                 __func__, "CAM3_POWER_DWN_GPIO");
99
100                 tegra_gpio_enable(CAM2_POWER_DWN_GPIO);
101                 ret = gpio_request(CAM2_POWER_DWN_GPIO, "camera2_power_en");
102                 if (ret < 0)
103                         pr_err("%s: gpio_request failed for gpio %s\n",
104                                 __func__, "CAM2_POWER_DWN_GPIO");
105
106                 tegra_gpio_enable(OV5650_RESETN_GPIO);
107                 ret = gpio_request(OV5650_RESETN_GPIO, "camera_reset");
108                 if (ret < 0)
109                         pr_err("%s: gpio_request failed for gpio %s\n",
110                                 __func__, "OV5650_RESETN_GPIO");
111
112                 gpio_direction_output(CAM3_POWER_DWN_GPIO, 1);
113                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 1);
114                 gpio_direction_output(CAM2_POWER_DWN_GPIO, 1);
115                 mdelay(10);
116
117                 gpio_direction_output(OV5650_RESETN_GPIO, 1);
118                 mdelay(5);
119                 gpio_direction_output(OV5650_RESETN_GPIO, 0);
120                 mdelay(5);
121                 gpio_direction_output(OV5650_RESETN_GPIO, 1);
122                 mdelay(5);
123         }
124
125         /* To select the CSIB MUX either for cam2 or cam3 */
126         tegra_gpio_enable(CAMERA_CSI_MUX_SEL_GPIO);
127         ret = gpio_request(CAMERA_CSI_MUX_SEL_GPIO, "camera_csi_sel");
128         if (ret < 0)
129                 pr_err("%s: gpio_request failed for gpio %s\n",
130                         __func__, "CAMERA_CSI_MUX_SEL_GPIO");
131         gpio_direction_output(CAMERA_CSI_MUX_SEL_GPIO, 0);
132         gpio_export(CAMERA_CSI_MUX_SEL_GPIO, false);
133
134         return 0;
135 }
136
137 static int cardhu_left_ov5650_power_on(void)
138 {
139         /* Boards E1198 and E1291 are of Cardhu personality
140          * and donot have TCA6416 exp for camera */
141         if ((board_info.board_id == BOARD_E1198) ||
142                 (board_info.board_id == BOARD_E1291)) {
143
144                 if (cardhu_vdd_2v8_cam1 == NULL) {
145                         cardhu_vdd_2v8_cam1 = regulator_get(NULL, "vdd_2v8_cam1");
146                         if (WARN_ON(IS_ERR(cardhu_vdd_2v8_cam1))) {
147                                 pr_err("%s: couldn't get regulator vdd_2v8_cam1: %ld\n",
148                                         __func__, PTR_ERR(cardhu_vdd_2v8_cam1));
149                                 goto reg_alloc_fail;
150                         }
151                 }
152                 regulator_enable(cardhu_vdd_2v8_cam1);
153                 mdelay(5);
154         }
155
156         /* Enable VDD_1V8_Cam1 */
157         if (cardhu_1v8_cam1 == NULL) {
158                 cardhu_1v8_cam1 = regulator_get(NULL, "vdd_1v8_cam1");
159                 if (WARN_ON(IS_ERR(cardhu_1v8_cam1))) {
160                         pr_err("%s: couldn't get regulator vdd_1v8_cam1: %ld\n",
161                                 __func__, PTR_ERR(cardhu_1v8_cam1));
162                         goto reg_alloc_fail;
163                 }
164         }
165         regulator_enable(cardhu_1v8_cam1);
166
167         mdelay(5);
168         if ((board_info.board_id == BOARD_E1198) ||
169                 (board_info.board_id == BOARD_E1291)) {
170                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 0);
171                 mdelay(20);
172                 gpio_direction_output(OV5650_RESETN_GPIO, 0);
173                 mdelay(100);
174                 gpio_direction_output(OV5650_RESETN_GPIO, 1);
175         }
176
177         if (board_info.board_id == BOARD_PM269) {
178                 gpio_direction_output(CAM1_RST_L_GPIO, 0);
179                 mdelay(100);
180                 gpio_direction_output(CAM1_RST_L_GPIO, 1);
181         }
182
183         return 0;
184
185 reg_alloc_fail:
186         if (cardhu_1v8_cam1) {
187                 regulator_put(cardhu_1v8_cam1);
188                 cardhu_1v8_cam1 = NULL;
189         }
190         if (cardhu_vdd_2v8_cam1) {
191                 regulator_put(cardhu_vdd_2v8_cam1);
192                 cardhu_vdd_2v8_cam1 = NULL;
193         }
194
195         return -ENODEV;
196
197 }
198
199 static int cardhu_left_ov5650_power_off(void)
200 {
201         /* Boards E1198 and E1291 are of Cardhu personality
202          * and donot have TCA6416 exp for camera */
203         if ((board_info.board_id == BOARD_E1198) ||
204                 (board_info.board_id == BOARD_E1291)) {
205                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 1);
206                 gpio_direction_output(CAM2_POWER_DWN_GPIO, 1);
207                 gpio_direction_output(CAM3_POWER_DWN_GPIO, 1);
208         }
209         if (cardhu_1v8_cam1)
210                 regulator_disable(cardhu_1v8_cam1);
211         if (cardhu_vdd_2v8_cam1)
212                 regulator_disable(cardhu_vdd_2v8_cam1);
213
214         return 0;
215 }
216
217 struct ov5650_platform_data cardhu_left_ov5650_data = {
218         .power_on = cardhu_left_ov5650_power_on,
219         .power_off = cardhu_left_ov5650_power_off,
220 };
221
222 #ifdef CONFIG_VIDEO_OV14810
223 static int cardhu_ov14810_power_on(void)
224 {
225         if (board_info.board_id == BOARD_E1198) {
226                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 1);
227                 mdelay(20);
228                 gpio_direction_output(OV14810_RESETN_GPIO, 0);
229                 mdelay(100);
230                 gpio_direction_output(OV14810_RESETN_GPIO, 1);
231         }
232
233         return 0;
234 }
235
236 static int cardhu_ov14810_power_off(void)
237 {
238         if (board_info.board_id == BOARD_E1198) {
239                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 1);
240                 gpio_direction_output(CAM2_POWER_DWN_GPIO, 1);
241                 gpio_direction_output(CAM3_POWER_DWN_GPIO, 1);
242         }
243
244         return 0;
245 }
246
247 struct ov14810_platform_data cardhu_ov14810_data = {
248         .power_on = cardhu_ov14810_power_on,
249         .power_off = cardhu_ov14810_power_off,
250 };
251
252 struct ov14810_platform_data cardhu_ov14810uC_data = {
253         .power_on = NULL,
254         .power_off = NULL,
255 };
256
257 struct ov14810_platform_data cardhu_ov14810SlaveDev_data = {
258         .power_on = NULL,
259         .power_off = NULL,
260 };
261
262 static struct i2c_board_info cardhu_i2c_board_info_e1214[] = {
263         {
264                 I2C_BOARD_INFO("ov14810", 0x36),
265                 .platform_data = &cardhu_ov14810_data,
266         },
267         {
268                 I2C_BOARD_INFO("ov14810uC", 0x67),
269                 .platform_data = &cardhu_ov14810uC_data,
270         },
271         {
272                 I2C_BOARD_INFO("ov14810SlaveDev", 0x69),
273                 .platform_data = &cardhu_ov14810SlaveDev_data,
274         }
275 };
276 #endif
277
278 static int cardhu_right_ov5650_power_on(void)
279 {
280         /* CSI-B and front sensor are muxed on cardhu */
281         gpio_direction_output(CAMERA_CSI_MUX_SEL_GPIO, 0);
282
283         /* Boards E1198 and E1291 are of Cardhu personality
284          * and donot have TCA6416 exp for camera */
285         if ((board_info.board_id == BOARD_E1198) ||
286                 (board_info.board_id == BOARD_E1291)) {
287
288                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 0);
289                 gpio_direction_output(CAM2_POWER_DWN_GPIO, 0);
290                 mdelay(10);
291
292                 if (cardhu_vdd_2v8_cam2 == NULL) {
293                         cardhu_vdd_2v8_cam2 = regulator_get(NULL, "vdd_2v8_cam2");
294                         if (WARN_ON(IS_ERR(cardhu_vdd_2v8_cam2))) {
295                                 pr_err("%s: couldn't get regulator vdd_2v8_cam2: %ld\n",
296                                         __func__, PTR_ERR(cardhu_vdd_2v8_cam2));
297                                 goto reg_alloc_fail;
298                         }
299                 }
300                 regulator_enable(cardhu_vdd_2v8_cam2);
301                 mdelay(5);
302         }
303
304         /* Enable VDD_1V8_Cam2 */
305         if (cardhu_1v8_cam2 == NULL) {
306                 cardhu_1v8_cam2 = regulator_get(NULL, "vdd_1v8_cam2");
307                 if (WARN_ON(IS_ERR(cardhu_1v8_cam2))) {
308                         pr_err("%s: couldn't get regulator vdd_1v8_cam2: %ld\n",
309                                 __func__, PTR_ERR(cardhu_1v8_cam2));
310                         goto reg_alloc_fail;
311                 }
312         }
313         regulator_enable(cardhu_1v8_cam2);
314
315         mdelay(5);
316
317         if (board_info.board_id == BOARD_PM269) {
318                 gpio_direction_output(CAM2_RST_L_GPIO, 0);
319                 mdelay(100);
320                 gpio_direction_output(CAM2_RST_L_GPIO, 1);
321         }
322
323         return 0;
324
325 reg_alloc_fail:
326         if (cardhu_1v8_cam2) {
327                 regulator_put(cardhu_1v8_cam2);
328                 cardhu_1v8_cam2 = NULL;
329         }
330         if (cardhu_vdd_2v8_cam2) {
331                 regulator_put(cardhu_vdd_2v8_cam2);
332                 cardhu_vdd_2v8_cam2 = NULL;
333         }
334
335         return -ENODEV;
336
337 }
338
339 static int cardhu_right_ov5650_power_off(void)
340 {
341         /* CSI-B and front sensor are muxed on cardhu */
342         gpio_direction_output(CAMERA_CSI_MUX_SEL_GPIO, 0);
343
344         /* Boards E1198 and E1291 are of Cardhu personality
345          * and donot have TCA6416 exp for camera */
346         if ((board_info.board_id == BOARD_E1198) ||
347                 (board_info.board_id == BOARD_E1291)) {
348                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 1);
349                 gpio_direction_output(CAM2_POWER_DWN_GPIO, 1);
350                 gpio_direction_output(CAM3_POWER_DWN_GPIO, 1);
351         }
352
353         if (cardhu_1v8_cam2)
354                 regulator_disable(cardhu_1v8_cam2);
355         if (cardhu_vdd_2v8_cam2)
356                 regulator_disable(cardhu_vdd_2v8_cam2);
357
358         return 0;
359 }
360
361 static void cardhu_ov5650_synchronize_sensors(void)
362 {
363         if (board_info.board_id == BOARD_E1198) {
364                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 1);
365                 mdelay(50);
366                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 0);
367                 mdelay(50);
368         }
369         else if (board_info.board_id == BOARD_E1291) {
370                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 1);
371                 gpio_direction_output(CAM2_POWER_DWN_GPIO, 1);
372                 mdelay(50);
373                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 0);
374                 gpio_direction_output(CAM2_POWER_DWN_GPIO, 0);
375                 mdelay(50);
376         }
377         else
378                 pr_err("%s: UnSupported BoardId\n", __func__);
379 }
380
381 struct ov5650_platform_data cardhu_right_ov5650_data = {
382         .power_on = cardhu_right_ov5650_power_on,
383         .power_off = cardhu_right_ov5650_power_off,
384         .synchronize_sensors = cardhu_ov5650_synchronize_sensors,
385 };
386
387 static int cardhu_ov2710_power_on(void)
388 {
389         /* CSI-B and front sensor are muxed on cardhu */
390         gpio_direction_output(CAMERA_CSI_MUX_SEL_GPIO, 1);
391
392         /* Boards E1198 and E1291 are of Cardhu personality
393          * and donot have TCA6416 exp for camera */
394         if ((board_info.board_id == BOARD_E1198) ||
395                 (board_info.board_id == BOARD_E1291)) {
396
397                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 0);
398                 gpio_direction_output(CAM2_POWER_DWN_GPIO, 0);
399                 gpio_direction_output(CAM3_POWER_DWN_GPIO, 0);
400                 mdelay(10);
401
402                 if (cardhu_vdd_cam3 == NULL) {
403                         cardhu_vdd_cam3 = regulator_get(NULL, "vdd_cam3");
404                         if (WARN_ON(IS_ERR(cardhu_vdd_cam3))) {
405                                 pr_err("%s: couldn't get regulator vdd_cam3: %ld\n",
406                                         __func__, PTR_ERR(cardhu_vdd_cam3));
407                                 goto reg_alloc_fail;
408                         }
409                 }
410                 regulator_enable(cardhu_vdd_cam3);
411         }
412
413         /* Enable VDD_1V8_Cam3 */
414         if (cardhu_1v8_cam3 == NULL) {
415                 cardhu_1v8_cam3 = regulator_get(NULL, "vdd_1v8_cam3");
416                 if (WARN_ON(IS_ERR(cardhu_1v8_cam3))) {
417                         pr_err("%s: couldn't get regulator vdd_1v8_cam3: %ld\n",
418                                 __func__, PTR_ERR(cardhu_1v8_cam3));
419                         goto reg_alloc_fail;
420                 }
421         }
422         regulator_enable(cardhu_1v8_cam3);
423         mdelay(5);
424
425         return 0;
426
427 reg_alloc_fail:
428         if (cardhu_1v8_cam3) {
429                 regulator_put(cardhu_1v8_cam3);
430                 cardhu_1v8_cam3 = NULL;
431         }
432         if (cardhu_vdd_cam3) {
433                 regulator_put(cardhu_vdd_cam3);
434                 cardhu_vdd_cam3 = NULL;
435         }
436
437         return -ENODEV;
438 }
439
440 static int cardhu_ov2710_power_off(void)
441 {
442         /* CSI-B and front sensor are muxed on cardhu */
443         gpio_direction_output(CAMERA_CSI_MUX_SEL_GPIO, 1);
444
445         /* Boards E1198 and E1291 are of Cardhu personality
446          * and donot have TCA6416 exp for camera */
447         if ((board_info.board_id == BOARD_E1198) ||
448                 (board_info.board_id == BOARD_E1291)) {
449                 gpio_direction_output(CAM1_POWER_DWN_GPIO, 1);
450                 gpio_direction_output(CAM2_POWER_DWN_GPIO, 1);
451                 gpio_direction_output(CAM3_POWER_DWN_GPIO, 1);
452         }
453
454         if (cardhu_1v8_cam3)
455                 regulator_disable(cardhu_1v8_cam3);
456         if (cardhu_vdd_cam3)
457                 regulator_disable(cardhu_vdd_cam3);
458
459         return 0;
460 }
461
462 struct ov2710_platform_data cardhu_ov2710_data = {
463         .power_on = cardhu_ov2710_power_on,
464         .power_off = cardhu_ov2710_power_off,
465 };
466
467 static const struct i2c_board_info cardhu_i2c3_board_info[] = {
468         {
469                 I2C_BOARD_INFO("pca9546", 0x70),
470                 .platform_data = &cardhu_pca954x_data,
471         },
472 };
473
474 static struct sh532u_platform_data sh532u_left_pdata = {
475         .num            = 1,
476         .sync           = 2,
477         .dev_name       = "focuser",
478         .gpio_reset     = TEGRA_GPIO_PBB0,
479 };
480
481 static struct sh532u_platform_data sh532u_right_pdata = {
482         .num            = 2,
483         .sync           = 1,
484         .dev_name       = "focuser",
485         .gpio_reset     = TEGRA_GPIO_PBB0,
486 };
487
488 static struct nvc_torch_pin_state cardhu_tps61050_pinstate = {
489         .mask           = 0x0008, /*VGP3*/
490         .values         = 0x0008,
491 };
492
493 static struct tps61050_platform_data cardhu_tps61050_pdata = {
494         .dev_name       = "torch",
495         .pinstate       = &cardhu_tps61050_pinstate,
496 };
497
498 static const struct i2c_board_info cardhu_i2c_board_info_tps61050[] = {
499         {
500                 I2C_BOARD_INFO("tps61050", 0x33),
501                 .platform_data = &cardhu_tps61050_pdata,
502         },
503 };
504
505 static struct i2c_board_info cardhu_i2c6_board_info[] = {
506         {
507                 I2C_BOARD_INFO("ov5650L", 0x36),
508                 .platform_data = &cardhu_left_ov5650_data,
509         },
510         {
511                 I2C_BOARD_INFO("sh532u", 0x72),
512                 .platform_data = &sh532u_left_pdata,
513         },
514 };
515
516 static struct i2c_board_info cardhu_i2c7_board_info[] = {
517         {
518                 I2C_BOARD_INFO("ov5650R", 0x36),
519                 .platform_data = &cardhu_right_ov5650_data,
520         },
521         {
522                 I2C_BOARD_INFO("sh532u", 0x72),
523                 .platform_data = &sh532u_right_pdata,
524         },
525 };
526
527 static struct i2c_board_info cardhu_i2c8_board_info[] = {
528         {
529                 I2C_BOARD_INFO("ov2710", 0x36),
530                 .platform_data = &cardhu_ov2710_data,
531         },
532 };
533
534 #ifndef CONFIG_TEGRA_INTERNAL_TSENSOR_EDP_SUPPORT
535 static int nct_get_temp(void *_data, long *temp)
536 {
537         struct nct1008_data *data = _data;
538         return nct1008_thermal_get_temp(data, temp);
539 }
540
541 static int nct_set_limits(void *_data,
542                         long lo_limit_milli,
543                         long hi_limit_milli)
544 {
545         struct nct1008_data *data = _data;
546         return nct1008_thermal_set_limits(data,
547                                         lo_limit_milli,
548                                         hi_limit_milli);
549 }
550
551 static int nct_set_alert(void *_data,
552                                 void (*alert_func)(void *),
553                                 void *alert_data)
554 {
555         struct nct1008_data *data = _data;
556         return nct1008_thermal_set_alert(data, alert_func, alert_data);
557 }
558
559 static int nct_set_shutdown_temp(void *_data, long shutdown_temp)
560 {
561         struct nct1008_data *data = _data;
562         return nct1008_thermal_set_shutdown_temp(data, shutdown_temp);
563 }
564 static void nct1008_probe_callback(struct nct1008_data *data)
565 {
566         struct tegra_thermal_device *thermal_device;
567
568         thermal_device = kzalloc(sizeof(struct tegra_thermal_device),
569                                         GFP_KERNEL);
570         if (!thermal_device) {
571                 pr_err("unable to allocate thermal device\n");
572                 return;
573         }
574
575         thermal_device->data = data;
576         thermal_device->offset = TDIODE_OFFSET;
577         thermal_device->get_temp = nct_get_temp;
578         thermal_device->set_limits = nct_set_limits;
579         thermal_device->set_alert = nct_set_alert;
580         thermal_device->set_shutdown_temp = nct_set_shutdown_temp;
581
582         tegra_thermal_set_device(thermal_device);
583 }
584 #endif
585
586 static struct nct1008_platform_data cardhu_nct1008_pdata = {
587         .supported_hwrev = true,
588         .ext_range = true,
589         .conv_rate = 0x08,
590         .offset = 8, /* 4 * 2C. Bug 844025 - 1C for device accuracies */
591 #ifndef CONFIG_TEGRA_INTERNAL_TSENSOR_EDP_SUPPORT
592         .probe_callback = nct1008_probe_callback,
593 #endif
594 };
595
596 static struct i2c_board_info cardhu_i2c4_bq27510_board_info[] = {
597         {
598                 I2C_BOARD_INFO("bq27510", 0x55),
599         },
600 };
601
602 static struct i2c_board_info cardhu_i2c4_nct1008_board_info[] = {
603         {
604                 I2C_BOARD_INFO("nct1008", 0x4C),
605                 .platform_data = &cardhu_nct1008_pdata,
606                 .irq = -1,
607         }
608 };
609
610 static int cardhu_nct1008_init(void)
611 {
612         int nct1008_port = -1;
613         int ret;
614
615         if ((board_info.board_id == BOARD_E1198) ||
616                 (board_info.board_id == BOARD_E1291) ||
617                 (board_info.board_id == BOARD_E1257) ||
618                 (board_info.board_id == BOARD_PM269) ||
619                 (board_info.board_id == BOARD_PM305) ||
620                 (board_info.board_id == BOARD_PM311)) {
621                 nct1008_port = TEGRA_GPIO_PCC2;
622         } else if ((board_info.board_id == BOARD_E1186) ||
623                 (board_info.board_id == BOARD_E1187) ||
624                 (board_info.board_id == BOARD_E1256)) {
625                 /* FIXME: seems to be conflicting with usb3 vbus on E1186 */
626                 /* nct1008_port = TEGRA_GPIO_PH7; */
627         }
628
629         if (nct1008_port >= 0) {
630                 /* FIXME: enable irq when throttling is supported */
631                 cardhu_i2c4_nct1008_board_info[0].irq = TEGRA_GPIO_TO_IRQ(nct1008_port);
632
633                 ret = gpio_request(nct1008_port, "temp_alert");
634                 if (ret < 0)
635                         return ret;
636
637                 ret = gpio_direction_input(nct1008_port);
638                 if (ret < 0)
639                         gpio_free(nct1008_port);
640                 else
641                         tegra_gpio_enable(nct1008_port);
642         }
643
644         return ret;
645 }
646
647 #if defined(CONFIG_GPIO_PCA953X)
648 static struct pca953x_platform_data cardhu_pmu_tca6416_data = {
649         .gpio_base      = PMU_TCA6416_GPIO_BASE,
650 };
651
652 static const struct i2c_board_info cardhu_i2c4_board_info_tca6416[] = {
653         {
654                 I2C_BOARD_INFO("tca6416", 0x20),
655                 .platform_data = &cardhu_pmu_tca6416_data,
656         },
657 };
658
659 static struct pca953x_platform_data cardhu_cam_tca6416_data = {
660         .gpio_base      = CAM_TCA6416_GPIO_BASE,
661 };
662
663 static const struct i2c_board_info cardhu_i2c2_board_info_tca6416[] = {
664         {
665                 I2C_BOARD_INFO("tca6416", 0x20),
666                 .platform_data = &cardhu_cam_tca6416_data,
667         },
668 };
669
670 static int __init pmu_tca6416_init(void)
671 {
672         if ((board_info.board_id == BOARD_E1198) ||
673                 (board_info.board_id == BOARD_E1291))
674                         return 0;
675
676         pr_info("Registering pmu pca6416\n");
677         i2c_register_board_info(4, cardhu_i2c4_board_info_tca6416,
678                 ARRAY_SIZE(cardhu_i2c4_board_info_tca6416));
679         return 0;
680 }
681
682 static int __init cam_tca6416_init(void)
683 {
684         /* Boards E1198 and E1291 are of Cardhu personality
685          * and donot have TCA6416 exp for camera */
686         if ((board_info.board_id == BOARD_E1198) ||
687                 (board_info.board_id == BOARD_E1291))
688                 return 0;
689
690         pr_info("Registering cam pca6416\n");
691         i2c_register_board_info(2, cardhu_i2c2_board_info_tca6416,
692                 ARRAY_SIZE(cardhu_i2c2_board_info_tca6416));
693         return 0;
694 }
695 #else
696 static int __init pmu_tca6416_init(void)
697 {
698         return 0;
699 }
700
701 static int __init cam_tca6416_init(void)
702 {
703         return 0;
704 }
705 #endif
706
707 #ifdef CONFIG_SENSORS_MPU3050
708 #define SENSOR_MPU_NAME "mpu3050"
709 static struct mpu3050_platform_data mpu3050_data = {
710         .int_config  = 0x10,
711         .orientation = { 0, -1, 0, -1, 0, 0, 0, 0, -1 },  /* Orientation matrix for MPU on cardhu */
712         .level_shifter = 0,
713
714         .accel = {
715         .get_slave_descr = get_accel_slave_descr,
716         .adapt_num   = 2,
717         .bus         = EXT_SLAVE_BUS_SECONDARY,
718         .address     = 0x0F,
719         .orientation = { 0, -1, 0, -1, 0, 0, 0, 0, -1 },  /* Orientation matrix for Kionix on cardhu */
720         },
721
722         .compass = {
723         .get_slave_descr = get_compass_slave_descr,
724         .adapt_num   = 2,
725         .bus         = EXT_SLAVE_BUS_PRIMARY,
726         .address     = 0x0C,
727         .orientation = { 1, 0, 0, 0, -1, 0, 0, 0, -1 },  /* Orientation matrix for AKM on cardhu */
728         },
729 };
730
731 static struct i2c_board_info __initdata mpu3050_i2c0_boardinfo[] = {
732         {
733                 I2C_BOARD_INFO(SENSOR_MPU_NAME, 0x68),
734                 .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_PX1),
735                 .platform_data = &mpu3050_data,
736         },
737 };
738
739 static void cardhu_mpuirq_init(void)
740 {
741         pr_info("*** MPU START *** cardhu_mpuirq_init...\n");
742         tegra_gpio_enable(TEGRA_GPIO_PX1);
743         gpio_request(TEGRA_GPIO_PX1, SENSOR_MPU_NAME);
744         gpio_direction_input(TEGRA_GPIO_PX1);
745         pr_info("*** MPU END *** cardhu_mpuirq_init...\n");
746 }
747 #endif
748
749
750 static struct i2c_board_info cardhu_i2c2_isl_board_info[] = {
751         {
752                 I2C_BOARD_INFO("isl29028", 0x44),
753         }
754 };
755
756 int __init cardhu_sensors_init(void)
757 {
758         int err;
759
760         tegra_get_board_info(&board_info);
761
762         cardhu_camera_init();
763         cam_tca6416_init();
764
765         i2c_register_board_info(2, cardhu_i2c3_board_info,
766                 ARRAY_SIZE(cardhu_i2c3_board_info));
767
768         i2c_register_board_info(2, cardhu_i2c_board_info_tps61050,
769                 ARRAY_SIZE(cardhu_i2c_board_info_tps61050));
770
771 #ifdef CONFIG_VIDEO_OV14810
772         /* This is disabled by default; To enable this change Kconfig;
773          * there should be some way to detect dynamically which board
774          * is connected (E1211/E1214), till that time sensor selection
775          * logic is static;
776          * e1214 corresponds to ov14810 sensor */
777         i2c_register_board_info(2, cardhu_i2c_board_info_e1214,
778                 ARRAY_SIZE(cardhu_i2c_board_info_e1214));
779 #else
780         /* Left  camera is on PCA954x's I2C BUS0, Right camera is on BUS1 &
781          * Front camera is on BUS2 */
782         i2c_register_board_info(PCA954x_I2C_BUS0, cardhu_i2c6_board_info,
783                 ARRAY_SIZE(cardhu_i2c6_board_info));
784
785         i2c_register_board_info(PCA954x_I2C_BUS1, cardhu_i2c7_board_info,
786                 ARRAY_SIZE(cardhu_i2c7_board_info));
787
788         i2c_register_board_info(PCA954x_I2C_BUS2, cardhu_i2c8_board_info,
789                 ARRAY_SIZE(cardhu_i2c8_board_info));
790
791 #endif
792         pmu_tca6416_init();
793
794         if (board_info.board_id == BOARD_E1291)
795                 i2c_register_board_info(4, cardhu_i2c4_bq27510_board_info,
796                         ARRAY_SIZE(cardhu_i2c4_bq27510_board_info));
797
798         i2c_register_board_info(2, cardhu_i2c2_isl_board_info,
799                 ARRAY_SIZE(cardhu_i2c2_isl_board_info));
800
801         err = cardhu_nct1008_init();
802         if (err)
803                 return err;
804
805         i2c_register_board_info(4, cardhu_i2c4_nct1008_board_info,
806                 ARRAY_SIZE(cardhu_i2c4_nct1008_board_info));
807
808 #ifdef CONFIG_SENSORS_MPU3050
809         cardhu_mpuirq_init();
810 #endif
811
812 #ifdef CONFIG_SENSORS_MPU3050
813         i2c_register_board_info(2, mpu3050_i2c0_boardinfo,
814                 ARRAY_SIZE(mpu3050_i2c0_boardinfo));
815 #endif
816
817         return 0;
818 }
819
820 #if defined(CONFIG_GPIO_PCA953X)
821 struct ov5650_gpios {
822         const char *name;
823         int gpio;
824         int enabled;
825 };
826
827 #define OV5650_GPIO(_name, _gpio, _enabled)             \
828         {                                               \
829                 .name = _name,                          \
830                 .gpio = _gpio,                          \
831                 .enabled = _enabled,                    \
832         }
833
834 static struct ov5650_gpios ov5650_gpio_keys[] = {
835         [0] = OV5650_GPIO("cam1_pwdn", CAM1_PWR_DN_GPIO, 0),
836         [1] = OV5650_GPIO("cam1_rst_lo", CAM1_RST_L_GPIO, 1),
837         [2] = OV5650_GPIO("cam1_af_pwdn_lo", CAM1_AF_PWR_DN_L_GPIO, 0),
838         [3] = OV5650_GPIO("cam1_ldo_shdn_lo", CAM1_LDO_SHUTDN_L_GPIO, 1),
839         [4] = OV5650_GPIO("cam2_pwdn", CAM2_PWR_DN_GPIO, 0),
840         [5] = OV5650_GPIO("cam2_rst_lo", CAM2_RST_L_GPIO, 1),
841         [6] = OV5650_GPIO("cam2_af_pwdn_lo", CAM2_AF_PWR_DN_L_GPIO, 0),
842         [7] = OV5650_GPIO("cam2_ldo_shdn_lo", CAM2_LDO_SHUTDN_L_GPIO, 1),
843         [8] = OV5650_GPIO("cam3_pwdn", CAM_FRONT_PWR_DN_GPIO, 0),
844         [9] = OV5650_GPIO("cam3_rst_lo", CAM_FRONT_RST_L_GPIO, 1),
845         [10] = OV5650_GPIO("cam3_af_pwdn_lo", CAM_FRONT_AF_PWR_DN_L_GPIO, 0),
846         [11] = OV5650_GPIO("cam3_ldo_shdn_lo", CAM_FRONT_LDO_SHUTDN_L_GPIO, 1),
847         [12] = OV5650_GPIO("cam_led_exp", CAM_FRONT_LED_EXP, 1),
848         [13] = OV5650_GPIO("cam_led_rear_exp", CAM_SNN_LED_REAR_EXP, 1),
849         [14] = OV5650_GPIO("cam_i2c_mux_rst", CAM_I2C_MUX_RST_EXP, 1),
850 };
851
852 int __init cardhu_ov5650_late_init(void)
853 {
854         int ret;
855         int i;
856
857         if (!machine_is_cardhu())
858                 return 0;
859
860         if ((board_info.board_id == BOARD_E1198) ||
861                 (board_info.board_id == BOARD_E1291))
862                 return 0;
863
864         printk("%s: \n", __func__);
865         for (i = 0; i < ARRAY_SIZE(ov5650_gpio_keys); i++) {
866                 ret = gpio_request(ov5650_gpio_keys[i].gpio,
867                         ov5650_gpio_keys[i].name);
868                 if (ret < 0) {
869                         printk("%s: gpio_request failed for gpio #%d\n",
870                                 __func__, i);
871                         goto fail;
872                 }
873                 printk("%s: enable - %d\n", __func__, i);
874                 gpio_direction_output(ov5650_gpio_keys[i].gpio,
875                         ov5650_gpio_keys[i].enabled);
876                 gpio_export(ov5650_gpio_keys[i].gpio, false);
877         }
878
879         return 0;
880
881 fail:
882         while (i--)
883                 gpio_free(ov5650_gpio_keys[i].gpio);
884         return ret;
885 }
886
887 late_initcall(cardhu_ov5650_late_init);
888 #endif