Merge branch 'gart/rename' of git://git.kernel.org/pub/scm/linux/kernel/git/joro...
[linux-2.6.git] / arch / arm / mach-pxa / vpac270.c
1 /*
2  * Hardware definitions for Voipac PXA270
3  *
4  * Copyright (C) 2010
5  * Marek Vasut <marek.vasut@gmail.com>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  *
11  */
12
13 #include <linux/platform_device.h>
14 #include <linux/delay.h>
15 #include <linux/irq.h>
16 #include <linux/gpio_keys.h>
17 #include <linux/input.h>
18 #include <linux/gpio.h>
19 #include <linux/sysdev.h>
20 #include <linux/usb/gpio_vbus.h>
21 #include <linux/mtd/mtd.h>
22 #include <linux/mtd/partitions.h>
23 #include <linux/mtd/physmap.h>
24 #include <linux/mtd/onenand.h>
25 #include <linux/dm9000.h>
26 #include <linux/ucb1400.h>
27 #include <linux/ata_platform.h>
28 #include <linux/regulator/max1586.h>
29 #include <linux/i2c/pxa-i2c.h>
30
31 #include <asm/mach-types.h>
32 #include <asm/mach/arch.h>
33
34 #include <mach/pxa27x.h>
35 #include <mach/audio.h>
36 #include <mach/vpac270.h>
37 #include <mach/mmc.h>
38 #include <mach/pxafb.h>
39 #include <mach/ohci.h>
40 #include <mach/pxa27x-udc.h>
41 #include <mach/udc.h>
42 #include <mach/pata_pxa.h>
43
44 #include "generic.h"
45 #include "devices.h"
46
47 /******************************************************************************
48  * Pin configuration
49  ******************************************************************************/
50 static unsigned long vpac270_pin_config[] __initdata = {
51         /* MMC */
52         GPIO32_MMC_CLK,
53         GPIO92_MMC_DAT_0,
54         GPIO109_MMC_DAT_1,
55         GPIO110_MMC_DAT_2,
56         GPIO111_MMC_DAT_3,
57         GPIO112_MMC_CMD,
58         GPIO53_GPIO,    /* SD detect */
59         GPIO52_GPIO,    /* SD r/o switch */
60
61         /* GPIO KEYS */
62         GPIO1_GPIO,     /* USER BTN */
63
64         /* LEDs */
65         GPIO15_GPIO,    /* orange led */
66
67         /* FFUART */
68         GPIO34_FFUART_RXD,
69         GPIO39_FFUART_TXD,
70         GPIO27_FFUART_RTS,
71         GPIO100_FFUART_CTS,
72         GPIO33_FFUART_DSR,
73         GPIO40_FFUART_DTR,
74         GPIO10_FFUART_DCD,
75         GPIO38_FFUART_RI,
76
77         /* LCD */
78         GPIO58_LCD_LDD_0,
79         GPIO59_LCD_LDD_1,
80         GPIO60_LCD_LDD_2,
81         GPIO61_LCD_LDD_3,
82         GPIO62_LCD_LDD_4,
83         GPIO63_LCD_LDD_5,
84         GPIO64_LCD_LDD_6,
85         GPIO65_LCD_LDD_7,
86         GPIO66_LCD_LDD_8,
87         GPIO67_LCD_LDD_9,
88         GPIO68_LCD_LDD_10,
89         GPIO69_LCD_LDD_11,
90         GPIO70_LCD_LDD_12,
91         GPIO71_LCD_LDD_13,
92         GPIO72_LCD_LDD_14,
93         GPIO73_LCD_LDD_15,
94         GPIO86_LCD_LDD_16,
95         GPIO87_LCD_LDD_17,
96         GPIO74_LCD_FCLK,
97         GPIO75_LCD_LCLK,
98         GPIO76_LCD_PCLK,
99         GPIO77_LCD_BIAS,
100
101         /* PCMCIA */
102         GPIO48_nPOE,
103         GPIO49_nPWE,
104         GPIO50_nPIOR,
105         GPIO51_nPIOW,
106         GPIO85_nPCE_1,
107         GPIO54_nPCE_2,
108         GPIO55_nPREG,
109         GPIO57_nIOIS16,
110         GPIO56_nPWAIT,
111         GPIO104_PSKTSEL,
112         GPIO84_GPIO,    /* PCMCIA CD */
113         GPIO35_GPIO,    /* PCMCIA RDY */
114         GPIO107_GPIO,   /* PCMCIA PPEN */
115         GPIO11_GPIO,    /* PCMCIA RESET */
116         GPIO17_GPIO,    /* CF CD */
117         GPIO12_GPIO,    /* CF RDY */
118         GPIO16_GPIO,    /* CF RESET */
119
120         /* UHC */
121         GPIO88_USBH1_PWR,
122         GPIO89_USBH1_PEN,
123         GPIO119_USBH2_PWR,
124         GPIO120_USBH2_PEN,
125
126         /* UDC */
127         GPIO41_GPIO,
128
129         /* Ethernet */
130         GPIO114_GPIO,   /* IRQ */
131
132         /* AC97 */
133         GPIO28_AC97_BITCLK,
134         GPIO29_AC97_SDATA_IN_0,
135         GPIO30_AC97_SDATA_OUT,
136         GPIO31_AC97_SYNC,
137         GPIO95_AC97_nRESET,
138         GPIO98_AC97_SYSCLK,
139         GPIO113_GPIO,   /* TS IRQ */
140
141         /* I2C */
142         GPIO117_I2C_SCL,
143         GPIO118_I2C_SDA,
144
145         /* IDE */
146         GPIO36_GPIO,    /* IDE IRQ */
147         GPIO80_DREQ_1,
148 };
149
150 /******************************************************************************
151  * NOR Flash
152  ******************************************************************************/
153 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
154 static struct mtd_partition vpac270_nor_partitions[] = {
155         {
156                 .name           = "Flash",
157                 .offset         = 0x00000000,
158                 .size           = MTDPART_SIZ_FULL,
159         }
160 };
161
162 static struct physmap_flash_data vpac270_flash_data[] = {
163         {
164                 .width          = 2,    /* bankwidth in bytes */
165                 .parts          = vpac270_nor_partitions,
166                 .nr_parts       = ARRAY_SIZE(vpac270_nor_partitions)
167         }
168 };
169
170 static struct resource vpac270_flash_resource = {
171         .start  = PXA_CS0_PHYS,
172         .end    = PXA_CS0_PHYS + SZ_64M - 1,
173         .flags  = IORESOURCE_MEM,
174 };
175
176 static struct platform_device vpac270_flash = {
177         .name           = "physmap-flash",
178         .id             = 0,
179         .resource       = &vpac270_flash_resource,
180         .num_resources  = 1,
181         .dev            = {
182                 .platform_data = vpac270_flash_data,
183         },
184 };
185 static void __init vpac270_nor_init(void)
186 {
187         platform_device_register(&vpac270_flash);
188 }
189 #else
190 static inline void vpac270_nor_init(void) {}
191 #endif
192
193 /******************************************************************************
194  * OneNAND Flash
195  ******************************************************************************/
196 #if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
197 static struct mtd_partition vpac270_onenand_partitions[] = {
198         {
199                 .name           = "Flash",
200                 .offset         = 0x00000000,
201                 .size           = MTDPART_SIZ_FULL,
202         }
203 };
204
205 static struct onenand_platform_data vpac270_onenand_info = {
206         .parts          = vpac270_onenand_partitions,
207         .nr_parts       = ARRAY_SIZE(vpac270_onenand_partitions),
208 };
209
210 static struct resource vpac270_onenand_resources[] = {
211         [0] = {
212                 .start  = PXA_CS0_PHYS,
213                 .end    = PXA_CS0_PHYS + SZ_1M,
214                 .flags  = IORESOURCE_MEM,
215         },
216 };
217
218 static struct platform_device vpac270_onenand = {
219         .name           = "onenand-flash",
220         .id             = -1,
221         .resource       = vpac270_onenand_resources,
222         .num_resources  = ARRAY_SIZE(vpac270_onenand_resources),
223         .dev            = {
224                 .platform_data  = &vpac270_onenand_info,
225         },
226 };
227
228 static void __init vpac270_onenand_init(void)
229 {
230         platform_device_register(&vpac270_onenand);
231 }
232 #else
233 static void __init vpac270_onenand_init(void) {}
234 #endif
235
236 /******************************************************************************
237  * SD/MMC card controller
238  ******************************************************************************/
239 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
240 static struct pxamci_platform_data vpac270_mci_platform_data = {
241         .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
242         .gpio_power             = -1,
243         .gpio_card_detect       = GPIO53_VPAC270_SD_DETECT_N,
244         .gpio_card_ro           = GPIO52_VPAC270_SD_READONLY,
245         .detect_delay_ms        = 200,
246 };
247
248 static void __init vpac270_mmc_init(void)
249 {
250         pxa_set_mci_info(&vpac270_mci_platform_data);
251 }
252 #else
253 static inline void vpac270_mmc_init(void) {}
254 #endif
255
256 /******************************************************************************
257  * GPIO keys
258  ******************************************************************************/
259 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
260 static struct gpio_keys_button vpac270_pxa_buttons[] = {
261         {KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
262 };
263
264 static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
265         .buttons        = vpac270_pxa_buttons,
266         .nbuttons       = ARRAY_SIZE(vpac270_pxa_buttons),
267 };
268
269 static struct platform_device vpac270_pxa_keys = {
270         .name   = "gpio-keys",
271         .id     = -1,
272         .dev    = {
273                 .platform_data = &vpac270_pxa_keys_data,
274         },
275 };
276
277 static void __init vpac270_keys_init(void)
278 {
279         platform_device_register(&vpac270_pxa_keys);
280 }
281 #else
282 static inline void vpac270_keys_init(void) {}
283 #endif
284
285 /******************************************************************************
286  * LED
287  ******************************************************************************/
288 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
289 struct gpio_led vpac270_gpio_leds[] = {
290 {
291         .name                   = "vpac270:orange:user",
292         .default_trigger        = "none",
293         .gpio                   = GPIO15_VPAC270_LED_ORANGE,
294         .active_low             = 1,
295 }
296 };
297
298 static struct gpio_led_platform_data vpac270_gpio_led_info = {
299         .leds           = vpac270_gpio_leds,
300         .num_leds       = ARRAY_SIZE(vpac270_gpio_leds),
301 };
302
303 static struct platform_device vpac270_leds = {
304         .name   = "leds-gpio",
305         .id     = -1,
306         .dev    = {
307                 .platform_data  = &vpac270_gpio_led_info,
308         }
309 };
310
311 static void __init vpac270_leds_init(void)
312 {
313         platform_device_register(&vpac270_leds);
314 }
315 #else
316 static inline void vpac270_leds_init(void) {}
317 #endif
318
319 /******************************************************************************
320  * USB Host
321  ******************************************************************************/
322 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
323 static int vpac270_ohci_init(struct device *dev)
324 {
325         UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
326         return 0;
327 }
328
329 static struct pxaohci_platform_data vpac270_ohci_info = {
330         .port_mode      = PMM_PERPORT_MODE,
331         .flags          = ENABLE_PORT1 | ENABLE_PORT2 |
332                         POWER_CONTROL_LOW | POWER_SENSE_LOW,
333         .init           = vpac270_ohci_init,
334 };
335
336 static void __init vpac270_uhc_init(void)
337 {
338         pxa_set_ohci_info(&vpac270_ohci_info);
339 }
340 #else
341 static inline void vpac270_uhc_init(void) {}
342 #endif
343
344 /******************************************************************************
345  * USB Gadget
346  ******************************************************************************/
347 #if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
348 static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
349         .gpio_vbus              = GPIO41_VPAC270_UDC_DETECT,
350         .gpio_pullup            = -1,
351 };
352
353 static struct platform_device vpac270_gpio_vbus = {
354         .name   = "gpio-vbus",
355         .id     = -1,
356         .dev    = {
357                 .platform_data  = &vpac270_gpio_vbus_info,
358         },
359 };
360
361 static void vpac270_udc_command(int cmd)
362 {
363         if (cmd == PXA2XX_UDC_CMD_CONNECT)
364                 UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
365         else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
366                 UP2OCR = UP2OCR_HXOE;
367 }
368
369 static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
370         .udc_command            = vpac270_udc_command,
371         .gpio_pullup            = -1,
372 };
373
374 static void __init vpac270_udc_init(void)
375 {
376         pxa_set_udc_info(&vpac270_udc_info);
377         platform_device_register(&vpac270_gpio_vbus);
378 }
379 #else
380 static inline void vpac270_udc_init(void) {}
381 #endif
382
383 /******************************************************************************
384  * Ethernet
385  ******************************************************************************/
386 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
387 static struct resource vpac270_dm9000_resources[] = {
388         [0] = {
389                 .start  = PXA_CS2_PHYS + 0x300,
390                 .end    = PXA_CS2_PHYS + 0x303,
391                 .flags  = IORESOURCE_MEM,
392         },
393         [1] = {
394                 .start  = PXA_CS2_PHYS + 0x304,
395                 .end    = PXA_CS2_PHYS + 0x343,
396                 .flags  = IORESOURCE_MEM,
397         },
398         [2] = {
399                 .start  = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
400                 .end    = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
401                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
402         },
403 };
404
405 static struct dm9000_plat_data vpac270_dm9000_platdata = {
406         .flags          = DM9000_PLATF_32BITONLY,
407 };
408
409 static struct platform_device vpac270_dm9000_device = {
410         .name           = "dm9000",
411         .id             = -1,
412         .num_resources  = ARRAY_SIZE(vpac270_dm9000_resources),
413         .resource       = vpac270_dm9000_resources,
414         .dev            = {
415                 .platform_data = &vpac270_dm9000_platdata,
416         }
417 };
418
419 static void __init vpac270_eth_init(void)
420 {
421         platform_device_register(&vpac270_dm9000_device);
422 }
423 #else
424 static inline void vpac270_eth_init(void) {}
425 #endif
426
427 /******************************************************************************
428  * Audio and Touchscreen
429  ******************************************************************************/
430 #if     defined(CONFIG_TOUCHSCREEN_UCB1400) || \
431         defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
432 static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
433         .reset_gpio     = 95,
434 };
435
436 static struct ucb1400_pdata vpac270_ucb1400_pdata = {
437         .irq            = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
438 };
439
440 static struct platform_device vpac270_ucb1400_device = {
441         .name           = "ucb1400_core",
442         .id             = -1,
443         .dev            = {
444                 .platform_data = &vpac270_ucb1400_pdata,
445         },
446 };
447
448 static void __init vpac270_ts_init(void)
449 {
450         pxa_set_ac97_info(&vpac270_ac97_pdata);
451         platform_device_register(&vpac270_ucb1400_device);
452 }
453 #else
454 static inline void vpac270_ts_init(void) {}
455 #endif
456
457 /******************************************************************************
458  * RTC
459  ******************************************************************************/
460 #if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
461 static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
462         {
463                 I2C_BOARD_INFO("ds1339", 0x68),
464         },
465 };
466
467 static void __init vpac270_rtc_init(void)
468 {
469         i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
470 }
471 #else
472 static inline void vpac270_rtc_init(void) {}
473 #endif
474
475 /******************************************************************************
476  * Framebuffer
477  ******************************************************************************/
478 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
479 static struct pxafb_mode_info vpac270_lcd_modes[] = {
480 {
481         .pixclock       = 57692,
482         .xres           = 640,
483         .yres           = 480,
484         .bpp            = 32,
485         .depth          = 18,
486
487         .left_margin    = 144,
488         .right_margin   = 32,
489         .upper_margin   = 13,
490         .lower_margin   = 30,
491
492         .hsync_len      = 32,
493         .vsync_len      = 2,
494
495         .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
496 }, {    /* CRT 640x480 */
497         .pixclock       = 35000,
498         .xres           = 640,
499         .yres           = 480,
500         .bpp            = 16,
501         .depth          = 16,
502
503         .left_margin    = 96,
504         .right_margin   = 48,
505         .upper_margin   = 33,
506         .lower_margin   = 10,
507
508         .hsync_len      = 48,
509         .vsync_len      = 1,
510
511         .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
512 }, {    /* CRT 800x600 H=30kHz V=48HZ */
513         .pixclock       = 25000,
514         .xres           = 800,
515         .yres           = 600,
516         .bpp            = 16,
517         .depth          = 16,
518
519         .left_margin    = 50,
520         .right_margin   = 1,
521         .upper_margin   = 21,
522         .lower_margin   = 12,
523
524         .hsync_len      = 8,
525         .vsync_len      = 1,
526
527         .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
528 }, {    /* CRT 1024x768 H=40kHz V=50Hz */
529         .pixclock       = 15000,
530         .xres           = 1024,
531         .yres           = 768,
532         .bpp            = 16,
533         .depth          = 16,
534
535         .left_margin    = 220,
536         .right_margin   = 8,
537         .upper_margin   = 33,
538         .lower_margin   = 2,
539
540         .hsync_len      = 48,
541         .vsync_len      = 1,
542
543         .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
544 }
545 };
546
547 static struct pxafb_mach_info vpac270_lcd_screen = {
548         .modes          = vpac270_lcd_modes,
549         .num_modes      = ARRAY_SIZE(vpac270_lcd_modes),
550         .lcd_conn       = LCD_COLOR_TFT_18BPP,
551 };
552
553 static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
554 {
555         gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
556 }
557
558 static void __init vpac270_lcd_init(void)
559 {
560         int ret;
561
562         ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
563         if (ret) {
564                 pr_err("Requesting BKL-ON GPIO failed!\n");
565                 goto err;
566         }
567
568         ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
569         if (ret) {
570                 pr_err("Setting BKL-ON GPIO direction failed!\n");
571                 goto err2;
572         }
573
574         vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
575         pxa_set_fb_info(NULL, &vpac270_lcd_screen);
576         return;
577
578 err2:
579         gpio_free(GPIO81_VPAC270_BKL_ON);
580 err:
581         return;
582 }
583 #else
584 static inline void vpac270_lcd_init(void) {}
585 #endif
586
587 /******************************************************************************
588  * PATA IDE
589  ******************************************************************************/
590 #if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
591 static struct pata_pxa_pdata vpac270_pata_pdata = {
592         .reg_shift      = 1,
593         .dma_dreq       = 1,
594         .irq_flags      = IRQF_TRIGGER_RISING,
595 };
596
597 static struct resource vpac270_ide_resources[] = {
598         [0] = { /* I/O Base address */
599                .start   = PXA_CS3_PHYS + 0x120,
600                .end     = PXA_CS3_PHYS + 0x13f,
601                .flags   = IORESOURCE_MEM
602         },
603         [1] = { /* CTL Base address */
604                .start   = PXA_CS3_PHYS + 0x15c,
605                .end     = PXA_CS3_PHYS + 0x15f,
606                .flags   = IORESOURCE_MEM
607         },
608         [2] = { /* DMA Base address */
609                .start   = PXA_CS3_PHYS + 0x20,
610                .end     = PXA_CS3_PHYS + 0x2f,
611                .flags   = IORESOURCE_DMA
612         },
613         [3] = { /* IDE IRQ pin */
614                .start   = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
615                .end     = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
616                .flags   = IORESOURCE_IRQ
617         }
618 };
619
620 static struct platform_device vpac270_ide_device = {
621         .name           = "pata_pxa",
622         .num_resources  = ARRAY_SIZE(vpac270_ide_resources),
623         .resource       = vpac270_ide_resources,
624         .dev            = {
625                 .platform_data  = &vpac270_pata_pdata,
626                 .coherent_dma_mask      = 0xffffffff,
627         }
628 };
629
630 static void __init vpac270_ide_init(void)
631 {
632         platform_device_register(&vpac270_ide_device);
633 }
634 #else
635 static inline void vpac270_ide_init(void) {}
636 #endif
637
638 /******************************************************************************
639  * Core power regulator
640  ******************************************************************************/
641 #if defined(CONFIG_REGULATOR_MAX1586) || \
642     defined(CONFIG_REGULATOR_MAX1586_MODULE)
643 static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
644         {
645                 .supply = "vcc_core",
646         }
647 };
648
649 static struct regulator_init_data vpac270_max1587a_v3_info = {
650         .constraints = {
651                 .name           = "vcc_core range",
652                 .min_uV         = 900000,
653                 .max_uV         = 1705000,
654                 .always_on      = 1,
655                 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
656         },
657         .consumer_supplies      = vpac270_max1587a_consumers,
658         .num_consumer_supplies  = ARRAY_SIZE(vpac270_max1587a_consumers),
659 };
660
661 static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
662         {
663                 .name           = "vcc_core",
664                 .id             = MAX1586_V3,
665                 .platform_data  = &vpac270_max1587a_v3_info,
666         }
667 };
668
669 static struct max1586_platform_data vpac270_max1587a_info = {
670         .subdevs     = vpac270_max1587a_subdevs,
671         .num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
672         .v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
673 };
674
675 static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
676         {
677                 I2C_BOARD_INFO("max1586", 0x14),
678                 .platform_data  = &vpac270_max1587a_info,
679         },
680 };
681
682 static void __init vpac270_pmic_init(void)
683 {
684         i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
685 }
686 #else
687 static inline void vpac270_pmic_init(void) {}
688 #endif
689
690
691 /******************************************************************************
692  * Machine init
693  ******************************************************************************/
694 static void __init vpac270_init(void)
695 {
696         pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
697
698         pxa_set_ffuart_info(NULL);
699         pxa_set_btuart_info(NULL);
700         pxa_set_stuart_info(NULL);
701         pxa_set_i2c_info(NULL);
702         pxa27x_set_i2c_power_info(NULL);
703
704         vpac270_pmic_init();
705         vpac270_lcd_init();
706         vpac270_mmc_init();
707         vpac270_nor_init();
708         vpac270_onenand_init();
709         vpac270_leds_init();
710         vpac270_keys_init();
711         vpac270_uhc_init();
712         vpac270_udc_init();
713         vpac270_eth_init();
714         vpac270_ts_init();
715         vpac270_rtc_init();
716         vpac270_ide_init();
717 }
718
719 MACHINE_START(VPAC270, "Voipac PXA270")
720         .boot_params    = 0xa0000100,
721         .map_io         = pxa27x_map_io,
722         .init_irq       = pxa27x_init_irq,
723         .timer          = &pxa_timer,
724         .init_machine   = vpac270_init
725 MACHINE_END