Merge git://git.infradead.org/battery-2.6
[linux-2.6.git] / arch / arm / mach-omap2 / board-rx51-peripherals.c
1 /*
2  * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
3  *
4  * Copyright (C) 2008-2009 Nokia
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/input.h>
15 #include <linux/input/matrix_keypad.h>
16 #include <linux/spi/spi.h>
17 #include <linux/wl12xx.h>
18 #include <linux/i2c.h>
19 #include <linux/i2c/twl.h>
20 #include <linux/clk.h>
21 #include <linux/delay.h>
22 #include <linux/regulator/machine.h>
23 #include <linux/gpio.h>
24 #include <linux/gpio_keys.h>
25 #include <linux/mmc/host.h>
26 #include <sound/tlv320aic3x.h>
27
28 #include <plat/mcspi.h>
29 #include <plat/board.h>
30 #include <plat/common.h>
31 #include <plat/dma.h>
32 #include <plat/gpmc.h>
33 #include <plat/onenand.h>
34 #include <plat/gpmc-smc91x.h>
35
36 #include <mach/board-rx51.h>
37
38 #include <sound/tlv320aic3x.h>
39 #include <sound/tpa6130a2-plat.h>
40
41 #include <../drivers/staging/iio/light/tsl2563.h>
42
43 #include "mux.h"
44 #include "hsmmc.h"
45
46 #define SYSTEM_REV_B_USES_VAUX3 0x1699
47 #define SYSTEM_REV_S_USES_VAUX3 0x8
48
49 #define RX51_WL1251_POWER_GPIO          87
50 #define RX51_WL1251_IRQ_GPIO            42
51
52 /* list all spi devices here */
53 enum {
54         RX51_SPI_WL1251,
55         RX51_SPI_MIPID,         /* LCD panel */
56         RX51_SPI_TSC2005,       /* Touch Controller */
57 };
58
59 static struct wl12xx_platform_data wl1251_pdata;
60
61 #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
62 static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
63         .cover_comp_gain = 16,
64 };
65 #endif
66
67 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
68         .turbo_mode     = 0,
69         .single_channel = 1,
70 };
71
72 static struct omap2_mcspi_device_config mipid_mcspi_config = {
73         .turbo_mode     = 0,
74         .single_channel = 1,
75 };
76
77 static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
78         .turbo_mode     = 0,
79         .single_channel = 1,
80 };
81
82 static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
83         [RX51_SPI_WL1251] = {
84                 .modalias               = "wl1251",
85                 .bus_num                = 4,
86                 .chip_select            = 0,
87                 .max_speed_hz           = 48000000,
88                 .mode                   = SPI_MODE_3,
89                 .controller_data        = &wl1251_mcspi_config,
90                 .platform_data          = &wl1251_pdata,
91         },
92         [RX51_SPI_MIPID] = {
93                 .modalias               = "acx565akm",
94                 .bus_num                = 1,
95                 .chip_select            = 2,
96                 .max_speed_hz           = 6000000,
97                 .controller_data        = &mipid_mcspi_config,
98         },
99         [RX51_SPI_TSC2005] = {
100                 .modalias               = "tsc2005",
101                 .bus_num                = 1,
102                 .chip_select            = 0,
103                 /* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/
104                 .max_speed_hz           = 6000000,
105                 .controller_data        = &tsc2005_mcspi_config,
106                 /* .platform_data = &tsc2005_config,*/
107         },
108 };
109
110 static struct platform_device rx51_charger_device = {
111         .name = "isp1704_charger",
112 };
113
114 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
115
116 #define RX51_GPIO_CAMERA_LENS_COVER     110
117 #define RX51_GPIO_CAMERA_FOCUS          68
118 #define RX51_GPIO_CAMERA_CAPTURE        69
119 #define RX51_GPIO_KEYPAD_SLIDE          71
120 #define RX51_GPIO_LOCK_BUTTON           113
121 #define RX51_GPIO_PROXIMITY             89
122
123 #define RX51_GPIO_DEBOUNCE_TIMEOUT      10
124
125 static struct gpio_keys_button rx51_gpio_keys[] = {
126         {
127                 .desc                   = "Camera Lens Cover",
128                 .type                   = EV_SW,
129                 .code                   = SW_CAMERA_LENS_COVER,
130                 .gpio                   = RX51_GPIO_CAMERA_LENS_COVER,
131                 .active_low             = 1,
132                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
133         }, {
134                 .desc                   = "Camera Focus",
135                 .type                   = EV_KEY,
136                 .code                   = KEY_CAMERA_FOCUS,
137                 .gpio                   = RX51_GPIO_CAMERA_FOCUS,
138                 .active_low             = 1,
139                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
140         }, {
141                 .desc                   = "Camera Capture",
142                 .type                   = EV_KEY,
143                 .code                   = KEY_CAMERA,
144                 .gpio                   = RX51_GPIO_CAMERA_CAPTURE,
145                 .active_low             = 1,
146                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
147         }, {
148                 .desc                   = "Lock Button",
149                 .type                   = EV_KEY,
150                 .code                   = KEY_SCREENLOCK,
151                 .gpio                   = RX51_GPIO_LOCK_BUTTON,
152                 .active_low             = 1,
153                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
154         }, {
155                 .desc                   = "Keypad Slide",
156                 .type                   = EV_SW,
157                 .code                   = SW_KEYPAD_SLIDE,
158                 .gpio                   = RX51_GPIO_KEYPAD_SLIDE,
159                 .active_low             = 1,
160                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
161         }, {
162                 .desc                   = "Proximity Sensor",
163                 .type                   = EV_SW,
164                 .code                   = SW_FRONT_PROXIMITY,
165                 .gpio                   = RX51_GPIO_PROXIMITY,
166                 .active_low             = 0,
167                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
168         }
169 };
170
171 static struct gpio_keys_platform_data rx51_gpio_keys_data = {
172         .buttons        = rx51_gpio_keys,
173         .nbuttons       = ARRAY_SIZE(rx51_gpio_keys),
174 };
175
176 static struct platform_device rx51_gpio_keys_device = {
177         .name   = "gpio-keys",
178         .id     = -1,
179         .dev    = {
180                 .platform_data  = &rx51_gpio_keys_data,
181         },
182 };
183
184 static void __init rx51_add_gpio_keys(void)
185 {
186         platform_device_register(&rx51_gpio_keys_device);
187 }
188 #else
189 static void __init rx51_add_gpio_keys(void)
190 {
191 }
192 #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
193
194 static uint32_t board_keymap[] = {
195         /*
196          * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
197          * connected to the ground" matrix state.
198          */
199         KEY(0, 0, KEY_Q),
200         KEY(0, 1, KEY_O),
201         KEY(0, 2, KEY_P),
202         KEY(0, 3, KEY_COMMA),
203         KEY(0, 4, KEY_BACKSPACE),
204         KEY(0, 6, KEY_A),
205         KEY(0, 7, KEY_S),
206
207         KEY(1, 0, KEY_W),
208         KEY(1, 1, KEY_D),
209         KEY(1, 2, KEY_F),
210         KEY(1, 3, KEY_G),
211         KEY(1, 4, KEY_H),
212         KEY(1, 5, KEY_J),
213         KEY(1, 6, KEY_K),
214         KEY(1, 7, KEY_L),
215
216         KEY(2, 0, KEY_E),
217         KEY(2, 1, KEY_DOT),
218         KEY(2, 2, KEY_UP),
219         KEY(2, 3, KEY_ENTER),
220         KEY(2, 5, KEY_Z),
221         KEY(2, 6, KEY_X),
222         KEY(2, 7, KEY_C),
223         KEY(2, 8, KEY_F9),
224
225         KEY(3, 0, KEY_R),
226         KEY(3, 1, KEY_V),
227         KEY(3, 2, KEY_B),
228         KEY(3, 3, KEY_N),
229         KEY(3, 4, KEY_M),
230         KEY(3, 5, KEY_SPACE),
231         KEY(3, 6, KEY_SPACE),
232         KEY(3, 7, KEY_LEFT),
233
234         KEY(4, 0, KEY_T),
235         KEY(4, 1, KEY_DOWN),
236         KEY(4, 2, KEY_RIGHT),
237         KEY(4, 4, KEY_LEFTCTRL),
238         KEY(4, 5, KEY_RIGHTALT),
239         KEY(4, 6, KEY_LEFTSHIFT),
240         KEY(4, 8, KEY_F10),
241
242         KEY(5, 0, KEY_Y),
243         KEY(5, 8, KEY_F11),
244
245         KEY(6, 0, KEY_U),
246
247         KEY(7, 0, KEY_I),
248         KEY(7, 1, KEY_F7),
249         KEY(7, 2, KEY_F8),
250 };
251
252 static struct matrix_keymap_data board_map_data = {
253         .keymap                 = board_keymap,
254         .keymap_size            = ARRAY_SIZE(board_keymap),
255 };
256
257 static struct twl4030_keypad_data rx51_kp_data = {
258         .keymap_data    = &board_map_data,
259         .rows           = 8,
260         .cols           = 8,
261         .rep            = 1,
262 };
263
264 static struct twl4030_madc_platform_data rx51_madc_data = {
265         .irq_line               = 1,
266 };
267
268 /* Enable input logic and pull all lines up when eMMC is on. */
269 static struct omap_board_mux rx51_mmc2_on_mux[] = {
270         OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
271         OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
272         OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
273         OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
274         OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
275         OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
276         OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
277         OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
278         OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
279         { .reg_offset = OMAP_MUX_TERMINATOR },
280 };
281
282 /* Disable input logic and pull all lines down when eMMC is off. */
283 static struct omap_board_mux rx51_mmc2_off_mux[] = {
284         OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0),
285         OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0),
286         OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0),
287         OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0),
288         OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0),
289         OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0),
290         OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0),
291         OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0),
292         OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0),
293         { .reg_offset = OMAP_MUX_TERMINATOR },
294 };
295
296 /*
297  * Current flows to eMMC when eMMC is off and the data lines are pulled up,
298  * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
299  */
300 static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
301 {
302         if (power_on)
303                 omap_mux_write_array(rx51_mmc2_on_mux);
304         else
305                 omap_mux_write_array(rx51_mmc2_off_mux);
306 }
307
308 static struct omap2_hsmmc_info mmc[] __initdata = {
309         {
310                 .name           = "external",
311                 .mmc            = 1,
312                 .caps           = MMC_CAP_4_BIT_DATA,
313                 .cover_only     = true,
314                 .gpio_cd        = 160,
315                 .gpio_wp        = -EINVAL,
316                 .power_saving   = true,
317         },
318         {
319                 .name           = "internal",
320                 .mmc            = 2,
321                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
322                                                 /* See also rx51_mmc2_remux */
323                 .gpio_cd        = -EINVAL,
324                 .gpio_wp        = -EINVAL,
325                 .nonremovable   = true,
326                 .power_saving   = true,
327                 .remux          = rx51_mmc2_remux,
328         },
329         {}      /* Terminator */
330 };
331
332 static struct regulator_consumer_supply rx51_vmmc1_supply =
333         REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
334
335 static struct regulator_consumer_supply rx51_vaux3_supply =
336         REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
337
338 static struct regulator_consumer_supply rx51_vsim_supply =
339         REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
340
341 static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
342         /* tlv320aic3x analog supplies */
343         REGULATOR_SUPPLY("AVDD", "2-0018"),
344         REGULATOR_SUPPLY("DRVDD", "2-0018"),
345         /* tpa6130a2 */
346         REGULATOR_SUPPLY("Vdd", "2-0060"),
347         /* Keep vmmc as last item. It is not iterated for newer boards */
348         REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
349 };
350
351 static struct regulator_consumer_supply rx51_vio_supplies[] = {
352         /* tlv320aic3x digital supplies */
353         REGULATOR_SUPPLY("IOVDD", "2-0018"),
354         REGULATOR_SUPPLY("DVDD", "2-0018"),
355 };
356
357 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
358 extern struct platform_device rx51_display_device;
359 #endif
360
361 static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
362 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
363         {
364                 .supply = "vdds_sdi",
365                 .dev    = &rx51_display_device.dev,
366         },
367 #endif
368 };
369
370 static struct regulator_init_data rx51_vaux1 = {
371         .constraints = {
372                 .name                   = "V28",
373                 .min_uV                 = 2800000,
374                 .max_uV                 = 2800000,
375                 .always_on              = true, /* due battery cover sensor */
376                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
377                                         | REGULATOR_MODE_STANDBY,
378                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
379                                         | REGULATOR_CHANGE_STATUS,
380         },
381         .num_consumer_supplies  = ARRAY_SIZE(rx51_vaux1_consumers),
382         .consumer_supplies      = rx51_vaux1_consumers,
383 };
384
385 static struct regulator_init_data rx51_vaux2 = {
386         .constraints = {
387                 .name                   = "VCSI",
388                 .min_uV                 = 1800000,
389                 .max_uV                 = 1800000,
390                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
391                                         | REGULATOR_MODE_STANDBY,
392                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
393                                         | REGULATOR_CHANGE_STATUS,
394         },
395 };
396
397 /* VAUX3 - adds more power to VIO_18 rail */
398 static struct regulator_init_data rx51_vaux3_cam = {
399         .constraints = {
400                 .name                   = "VCAM_DIG_18",
401                 .min_uV                 = 1800000,
402                 .max_uV                 = 1800000,
403                 .apply_uV               = true,
404                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
405                                         | REGULATOR_MODE_STANDBY,
406                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
407                                         | REGULATOR_CHANGE_STATUS,
408         },
409 };
410
411 static struct regulator_init_data rx51_vaux3_mmc = {
412         .constraints = {
413                 .name                   = "VMMC2_30",
414                 .min_uV                 = 2800000,
415                 .max_uV                 = 3000000,
416                 .apply_uV               = true,
417                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
418                                         | REGULATOR_MODE_STANDBY,
419                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
420                                         | REGULATOR_CHANGE_MODE
421                                         | REGULATOR_CHANGE_STATUS,
422         },
423         .num_consumer_supplies  = 1,
424         .consumer_supplies      = &rx51_vaux3_supply,
425 };
426
427 static struct regulator_init_data rx51_vaux4 = {
428         .constraints = {
429                 .name                   = "VCAM_ANA_28",
430                 .min_uV                 = 2800000,
431                 .max_uV                 = 2800000,
432                 .apply_uV               = true,
433                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
434                                         | REGULATOR_MODE_STANDBY,
435                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
436                                         | REGULATOR_CHANGE_STATUS,
437         },
438 };
439
440 static struct regulator_init_data rx51_vmmc1 = {
441         .constraints = {
442                 .min_uV                 = 1850000,
443                 .max_uV                 = 3150000,
444                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
445                                         | REGULATOR_MODE_STANDBY,
446                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
447                                         | REGULATOR_CHANGE_MODE
448                                         | REGULATOR_CHANGE_STATUS,
449         },
450         .num_consumer_supplies  = 1,
451         .consumer_supplies      = &rx51_vmmc1_supply,
452 };
453
454 static struct regulator_init_data rx51_vmmc2 = {
455         .constraints = {
456                 .name                   = "V28_A",
457                 .min_uV                 = 2800000,
458                 .max_uV                 = 3000000,
459                 .apply_uV               = true,
460                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
461                                         | REGULATOR_MODE_STANDBY,
462                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
463                                         | REGULATOR_CHANGE_MODE
464                                         | REGULATOR_CHANGE_STATUS,
465         },
466         .num_consumer_supplies  = ARRAY_SIZE(rx51_vmmc2_supplies),
467         .consumer_supplies      = rx51_vmmc2_supplies,
468 };
469
470 static struct regulator_init_data rx51_vsim = {
471         .constraints = {
472                 .name                   = "VMMC2_IO_18",
473                 .min_uV                 = 1800000,
474                 .max_uV                 = 1800000,
475                 .apply_uV               = true,
476                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
477                                         | REGULATOR_MODE_STANDBY,
478                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
479                                         | REGULATOR_CHANGE_STATUS,
480         },
481         .num_consumer_supplies  = 1,
482         .consumer_supplies      = &rx51_vsim_supply,
483 };
484
485 static struct regulator_init_data rx51_vdac = {
486         .constraints = {
487                 .min_uV                 = 1800000,
488                 .max_uV                 = 1800000,
489                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
490                                         | REGULATOR_MODE_STANDBY,
491                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
492                                         | REGULATOR_CHANGE_MODE
493                                         | REGULATOR_CHANGE_STATUS,
494         },
495 };
496
497 static struct regulator_init_data rx51_vio = {
498         .constraints = {
499                 .min_uV                 = 1800000,
500                 .max_uV                 = 1800000,
501                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
502                                         | REGULATOR_MODE_STANDBY,
503                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
504                                         | REGULATOR_CHANGE_MODE
505                                         | REGULATOR_CHANGE_STATUS,
506         },
507         .num_consumer_supplies  = ARRAY_SIZE(rx51_vio_supplies),
508         .consumer_supplies      = rx51_vio_supplies,
509 };
510
511 static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
512 {
513         /* FIXME this gpio setup is just a placeholder for now */
514         gpio_request(gpio + 6, "backlight_pwm");
515         gpio_direction_output(gpio + 6, 0);
516         gpio_request(gpio + 7, "speaker_en");
517         gpio_direction_output(gpio + 7, 1);
518
519         return 0;
520 }
521
522 static struct twl4030_gpio_platform_data rx51_gpio_data = {
523         .gpio_base              = OMAP_MAX_GPIO_LINES,
524         .irq_base               = TWL4030_GPIO_IRQ_BASE,
525         .irq_end                = TWL4030_GPIO_IRQ_END,
526         .pulldowns              = BIT(0) | BIT(1) | BIT(2) | BIT(3)
527                                 | BIT(4) | BIT(5)
528                                 | BIT(8) | BIT(9) | BIT(10) | BIT(11)
529                                 | BIT(12) | BIT(13) | BIT(14) | BIT(15)
530                                 | BIT(16) | BIT(17) ,
531         .setup                  = rx51_twlgpio_setup,
532 };
533
534 static struct twl4030_usb_data rx51_usb_data = {
535         .usb_mode               = T2_USB_MODE_ULPI,
536 };
537
538 static struct twl4030_ins sleep_on_seq[] __initdata = {
539 /*
540  * Turn off everything
541  */
542         {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2},
543 };
544
545 static struct twl4030_script sleep_on_script __initdata = {
546         .script = sleep_on_seq,
547         .size   = ARRAY_SIZE(sleep_on_seq),
548         .flags  = TWL4030_SLEEP_SCRIPT,
549 };
550
551 static struct twl4030_ins wakeup_seq[] __initdata = {
552 /*
553  * Reenable everything
554  */
555         {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
556 };
557
558 static struct twl4030_script wakeup_script __initdata = {
559         .script = wakeup_seq,
560         .size   = ARRAY_SIZE(wakeup_seq),
561         .flags  = TWL4030_WAKEUP12_SCRIPT,
562 };
563
564 static struct twl4030_ins wakeup_p3_seq[] __initdata = {
565 /*
566  * Reenable everything
567  */
568         {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
569 };
570
571 static struct twl4030_script wakeup_p3_script __initdata = {
572         .script = wakeup_p3_seq,
573         .size   = ARRAY_SIZE(wakeup_p3_seq),
574         .flags  = TWL4030_WAKEUP3_SCRIPT,
575 };
576
577 static struct twl4030_ins wrst_seq[] __initdata = {
578 /*
579  * Reset twl4030.
580  * Reset VDD1 regulator.
581  * Reset VDD2 regulator.
582  * Reset VPLL1 regulator.
583  * Enable sysclk output.
584  * Reenable twl4030.
585  */
586         {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
587         {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
588                 0x13},
589         {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
590         {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
591         {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
592         {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
593         {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
594         {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
595 };
596
597 static struct twl4030_script wrst_script __initdata = {
598         .script = wrst_seq,
599         .size   = ARRAY_SIZE(wrst_seq),
600         .flags  = TWL4030_WRST_SCRIPT,
601 };
602
603 static struct twl4030_script *twl4030_scripts[] __initdata = {
604         /* wakeup12 script should be loaded before sleep script, otherwise a
605            board might hit retention before loading of wakeup script is
606            completed. This can cause boot failures depending on timing issues.
607         */
608         &wakeup_script,
609         &sleep_on_script,
610         &wakeup_p3_script,
611         &wrst_script,
612 };
613
614 static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
615         { .resource = RES_VDD1, .devgroup = -1,
616           .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
617           .remap_sleep = RES_STATE_OFF
618         },
619         { .resource = RES_VDD2, .devgroup = -1,
620           .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
621           .remap_sleep = RES_STATE_OFF
622         },
623         { .resource = RES_VPLL1, .devgroup = -1,
624           .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
625           .remap_sleep = RES_STATE_OFF
626         },
627         { .resource = RES_VPLL2, .devgroup = -1,
628           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
629         },
630         { .resource = RES_VAUX1, .devgroup = -1,
631           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
632         },
633         { .resource = RES_VAUX2, .devgroup = -1,
634           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
635         },
636         { .resource = RES_VAUX3, .devgroup = -1,
637           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
638         },
639         { .resource = RES_VAUX4, .devgroup = -1,
640           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
641         },
642         { .resource = RES_VMMC1, .devgroup = -1,
643           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
644         },
645         { .resource = RES_VMMC2, .devgroup = -1,
646           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
647         },
648         { .resource = RES_VDAC, .devgroup = -1,
649           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
650         },
651         { .resource = RES_VSIM, .devgroup = -1,
652           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
653         },
654         { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
655           .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
656         },
657         { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
658           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
659         },
660         { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
661           .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
662         },
663         { .resource = RES_VIO, .devgroup = DEV_GRP_P3,
664           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
665         },
666         { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
667           .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1
668         },
669         { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
670           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
671         },
672         { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
673           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
674         },
675         { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
676           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
677         },
678         { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
679           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
680         },
681         { .resource = RES_32KCLKOUT, .devgroup = -1,
682           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
683         },
684         { .resource = RES_RESET, .devgroup = -1,
685           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
686         },
687         { .resource = RES_Main_Ref, .devgroup = -1,
688           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
689         },
690         { 0, 0},
691 };
692
693 static struct twl4030_power_data rx51_t2scripts_data __initdata = {
694         .scripts        = twl4030_scripts,
695         .num = ARRAY_SIZE(twl4030_scripts),
696         .resource_config = twl4030_rconfig,
697 };
698
699
700 static struct twl4030_platform_data rx51_twldata __initdata = {
701         .irq_base               = TWL4030_IRQ_BASE,
702         .irq_end                = TWL4030_IRQ_END,
703
704         /* platform_data for children goes here */
705         .gpio                   = &rx51_gpio_data,
706         .keypad                 = &rx51_kp_data,
707         .madc                   = &rx51_madc_data,
708         .usb                    = &rx51_usb_data,
709         .power                  = &rx51_t2scripts_data,
710
711         .vaux1                  = &rx51_vaux1,
712         .vaux2                  = &rx51_vaux2,
713         .vaux4                  = &rx51_vaux4,
714         .vmmc1                  = &rx51_vmmc1,
715         .vsim                   = &rx51_vsim,
716         .vdac                   = &rx51_vdac,
717         .vio                    = &rx51_vio,
718 };
719
720 static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = {
721         .id                     = TPA6130A2,
722         .power_gpio             = 98,
723 };
724
725 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
726         {
727                 I2C_BOARD_INFO("twl5030", 0x48),
728                 .flags = I2C_CLIENT_WAKE,
729                 .irq = INT_34XX_SYS_NIRQ,
730                 .platform_data = &rx51_twldata,
731         },
732 };
733
734 /* Audio setup data */
735 static struct aic3x_setup_data rx51_aic34_setup = {
736         .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
737         .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,
738 };
739
740 static struct aic3x_pdata rx51_aic3x_data = {
741         .setup = &rx51_aic34_setup,
742         .gpio_reset = 60,
743 };
744
745 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
746         {
747                 I2C_BOARD_INFO("tlv320aic3x", 0x18),
748                 .platform_data = &rx51_aic3x_data,
749         },
750 #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
751         {
752                 I2C_BOARD_INFO("tsl2563", 0x29),
753                 .platform_data = &rx51_tsl2563_platform_data,
754         },
755 #endif
756         {
757                 I2C_BOARD_INFO("tpa6130a2", 0x60),
758                 .platform_data = &rx51_tpa6130a2_data,
759         }
760 };
761
762 static int __init rx51_i2c_init(void)
763 {
764         if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
765             system_rev >= SYSTEM_REV_B_USES_VAUX3) {
766                 rx51_twldata.vaux3 = &rx51_vaux3_mmc;
767                 /* Only older boards use VMMC2 for internal MMC */
768                 rx51_vmmc2.num_consumer_supplies--;
769         } else {
770                 rx51_twldata.vaux3 = &rx51_vaux3_cam;
771         }
772         rx51_twldata.vmmc2 = &rx51_vmmc2;
773         omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
774                               ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
775         omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
776                               ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
777         omap_register_i2c_bus(3, 400, NULL, 0);
778         return 0;
779 }
780
781 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
782         defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
783
784 static struct mtd_partition onenand_partitions[] = {
785         {
786                 .name           = "bootloader",
787                 .offset         = 0,
788                 .size           = 0x20000,
789                 .mask_flags     = MTD_WRITEABLE,        /* Force read-only */
790         },
791         {
792                 .name           = "config",
793                 .offset         = MTDPART_OFS_APPEND,
794                 .size           = 0x60000,
795         },
796         {
797                 .name           = "log",
798                 .offset         = MTDPART_OFS_APPEND,
799                 .size           = 0x40000,
800         },
801         {
802                 .name           = "kernel",
803                 .offset         = MTDPART_OFS_APPEND,
804                 .size           = 0x200000,
805         },
806         {
807                 .name           = "initfs",
808                 .offset         = MTDPART_OFS_APPEND,
809                 .size           = 0x200000,
810         },
811         {
812                 .name           = "rootfs",
813                 .offset         = MTDPART_OFS_APPEND,
814                 .size           = MTDPART_SIZ_FULL,
815         },
816 };
817
818 static struct omap_onenand_platform_data board_onenand_data = {
819         .cs             = 0,
820         .gpio_irq       = 65,
821         .parts          = onenand_partitions,
822         .nr_parts       = ARRAY_SIZE(onenand_partitions),
823         .flags          = ONENAND_SYNC_READWRITE,
824 };
825
826 static void __init board_onenand_init(void)
827 {
828         gpmc_onenand_init(&board_onenand_data);
829 }
830
831 #else
832
833 static inline void board_onenand_init(void)
834 {
835 }
836
837 #endif
838
839 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
840
841 static struct omap_smc91x_platform_data board_smc91x_data = {
842         .cs             = 1,
843         .gpio_irq       = 54,
844         .gpio_pwrdwn    = 86,
845         .gpio_reset     = 164,
846         .flags          = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
847 };
848
849 static void __init board_smc91x_init(void)
850 {
851         omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
852         omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
853         omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
854
855         gpmc_smc91x_init(&board_smc91x_data);
856 }
857
858 #else
859
860 static inline void board_smc91x_init(void)
861 {
862 }
863
864 #endif
865
866 static void rx51_wl1251_set_power(bool enable)
867 {
868         gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
869 }
870
871 static void __init rx51_init_wl1251(void)
872 {
873         int irq, ret;
874
875         ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power");
876         if (ret < 0)
877                 goto error;
878
879         ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0);
880         if (ret < 0)
881                 goto err_power;
882
883         ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq");
884         if (ret < 0)
885                 goto err_power;
886
887         ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO);
888         if (ret < 0)
889                 goto err_irq;
890
891         irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
892         if (irq < 0)
893                 goto err_irq;
894
895         wl1251_pdata.set_power = rx51_wl1251_set_power;
896         rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
897
898         return;
899
900 err_irq:
901         gpio_free(RX51_WL1251_IRQ_GPIO);
902
903 err_power:
904         gpio_free(RX51_WL1251_POWER_GPIO);
905
906 error:
907         printk(KERN_ERR "wl1251 board initialisation failed\n");
908         wl1251_pdata.set_power = NULL;
909
910         /*
911          * Now rx51_peripherals_spi_board_info[1].irq is zero and
912          * set_power is null, and wl1251_probe() will fail.
913          */
914 }
915
916 void __init rx51_peripherals_init(void)
917 {
918         rx51_i2c_init();
919         board_onenand_init();
920         board_smc91x_init();
921         rx51_add_gpio_keys();
922         rx51_init_wl1251();
923         spi_register_board_info(rx51_peripherals_spi_board_info,
924                                 ARRAY_SIZE(rx51_peripherals_spi_board_info));
925         omap2_hsmmc_init(mmc);
926         platform_device_register(&rx51_charger_device);
927 }
928