arch/arm/mach-iop32x/n2100.c

   1 /*
   2  * arch/arm/mach-iop32x/n2100.c
   3  *
   4  * Board support code for the Thecus N2100 platform.
   5  *
   6  * Author: Rory Bolt <rorybolt@pacbell.net>
   7  * Copyright (C) 2002 Rory Bolt
   8  * Copyright 2003 (c) MontaVista, Software, Inc.
   9  * Copyright (C) 2004 Intel Corp.
  10  *
  11  * This program is free software; you can redistribute it and/or modify it
  12  * under the terms of the GNU General Public License as published by the
  13  * Free Software Foundation; either version 2 of the License, or (at your
  14  * option) any later version.
  15  */
  16
  17 #include <linux/mm.h>
  18 #include <linux/init.h>
  19 #include <linux/f75375s.h>
  20 #include <linux/leds-pca9532.h>
  21 #include <linux/delay.h>
  22 #include <linux/kernel.h>
  23 #include <linux/pci.h>
  24 #include <linux/pm.h>
  25 #include <linux/string.h>
  26 #include <linux/serial_core.h>
  27 #include <linux/serial_8250.h>
  28 #include <linux/mtd/physmap.h>
  29 #include <linux/i2c.h>
  30 #include <linux/platform_device.h>
  31 #include <linux/reboot.h>
  32 #include <linux/io.h>
  33 #include <mach/hardware.h>
  34 #include <asm/irq.h>
  35 #include <asm/mach/arch.h>
  36 #include <asm/mach/map.h>
  37 #include <asm/mach/pci.h>
  38 #include <asm/mach/time.h>
  39 #include <asm/mach-types.h>
  40 #include <asm/page.h>
  41 #include <asm/pgtable.h>
  42 #include <mach/time.h>
  43
  44 /*
  45  * N2100 timer tick configuration.
  46  */
  47 static void __init n2100_timer_init(void)
  48 {
  49         /* 33.000 MHz crystal.  */
  50         iop_init_time(198000000);
  51 }
  52
  53 static struct sys_timer n2100_timer = {
  54         .init           = n2100_timer_init,
  55 };
  56
  57
  58 /*
  59  * N2100 I/O.
  60  */
  61 static struct map_desc n2100_io_desc[] __initdata = {
  62         {       /* on-board devices */
  63                 .virtual        = N2100_UART,
  64                 .pfn            = __phys_to_pfn(N2100_UART),
  65                 .length         = 0x00100000,
  66                 .type           = MT_DEVICE
  67         },
  68 };
  69
  70 void __init n2100_map_io(void)
  71 {
  72         iop3xx_map_io();
  73         iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
  74 }
  75
  76
  77 /*
  78  * N2100 PCI.
  79  */
  80 static int __init
  81 n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
  82 {
  83         int irq;
  84
  85         if (PCI_SLOT(dev->devfn) == 1) {
  86                 /* RTL8110SB #1 */
  87                 irq = IRQ_IOP32X_XINT0;
  88         } else if (PCI_SLOT(dev->devfn) == 2) {
  89                 /* RTL8110SB #2 */
  90                 irq = IRQ_IOP32X_XINT3;
  91         } else if (PCI_SLOT(dev->devfn) == 3) {
  92                 /* Sil3512 */
  93                 irq = IRQ_IOP32X_XINT2;
  94         } else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
  95                 /* VT6212 INTA */
  96                 irq = IRQ_IOP32X_XINT1;
  97         } else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
  98                 /* VT6212 INTB */
  99                 irq = IRQ_IOP32X_XINT0;
 100         } else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
 101                 /* VT6212 INTC */
 102                 irq = IRQ_IOP32X_XINT2;
 103         } else if (PCI_SLOT(dev->devfn) == 5) {
 104                 /* Mini-PCI slot */
 105                 irq = IRQ_IOP32X_XINT3;
 106         } else {
 107                 printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
 108                         "device PCI:%d:%d:%d\n", dev->bus->number,
 109                         PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
 110                 irq = -1;
 111         }
 112
 113         return irq;
 114 }
 115
 116 static struct hw_pci n2100_pci __initdata = {
 117         .swizzle        = pci_std_swizzle,
 118         .nr_controllers = 1,
 119         .setup          = iop3xx_pci_setup,
 120         .preinit        = iop3xx_pci_preinit,
 121         .scan           = iop3xx_pci_scan_bus,
 122         .map_irq        = n2100_pci_map_irq,
 123 };
 124
 125 /*
 126  * Both r8169 chips on the n2100 exhibit PCI parity problems.  Set
 127  * the ->broken_parity_status flag for both ports so that the r8169
 128  * driver knows it should ignore error interrupts.
 129  */
 130 static void n2100_fixup_r8169(struct pci_dev *dev)
 131 {
 132         if (dev->bus->number == 0 &&
 133             (dev->devfn == PCI_DEVFN(1, 0) ||
 134              dev->devfn == PCI_DEVFN(2, 0)))
 135                 dev->broken_parity_status = 1;
 136 }
 137 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
 138
 139 static int __init n2100_pci_init(void)
 140 {
 141         if (machine_is_n2100())
 142                 pci_common_init(&n2100_pci);
 143
 144         return 0;
 145 }
 146
 147 subsys_initcall(n2100_pci_init);
 148
 149
 150 /*
 151  * N2100 machine initialisation.
 152  */
 153 static struct physmap_flash_data n2100_flash_data = {
 154         .width          = 2,
 155 };
 156
 157 static struct resource n2100_flash_resource = {
 158         .start          = 0xf0000000,
 159         .end            = 0xf0ffffff,
 160         .flags          = IORESOURCE_MEM,
 161 };
 162
 163 static struct platform_device n2100_flash_device = {
 164         .name           = "physmap-flash",
 165         .id             = 0,
 166         .dev            = {
 167                 .platform_data  = &n2100_flash_data,
 168         },
 169         .num_resources  = 1,
 170         .resource       = &n2100_flash_resource,
 171 };
 172
 173
 174 static struct plat_serial8250_port n2100_serial_port[] = {
 175         {
 176                 .mapbase        = N2100_UART,
 177                 .membase        = (char *)N2100_UART,
 178                 .irq            = 0,
 179                 .flags          = UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
 180                 .iotype         = UPIO_MEM,
 181                 .regshift       = 0,
 182                 .uartclk        = 1843200,
 183         },
 184         { },
 185 };
 186
 187 static struct resource n2100_uart_resource = {
 188         .start          = N2100_UART,
 189         .end            = N2100_UART + 7,
 190         .flags          = IORESOURCE_MEM,
 191 };
 192
 193 static struct platform_device n2100_serial_device = {
 194         .name           = "serial8250",
 195         .id             = PLAT8250_DEV_PLATFORM,
 196         .dev            = {
 197                 .platform_data          = n2100_serial_port,
 198         },
 199         .num_resources  = 1,
 200         .resource       = &n2100_uart_resource,
 201 };
 202
 203 static struct f75375s_platform_data n2100_f75375s = {
 204         .pwm            = { 255, 255 },
 205         .pwm_enable = { 0, 0 },
 206 };
 207
 208 static struct pca9532_platform_data n2100_leds = {
 209         .leds = {
 210         {       .name = "n2100:red:satafail0",
 211                 .state = PCA9532_OFF,
 212                 .type = PCA9532_TYPE_LED,
 213         },
 214         {       .name = "n2100:red:satafail1",
 215                 .state = PCA9532_OFF,
 216                 .type = PCA9532_TYPE_LED,
 217         },
 218         {       .name = "n2100:blue:usb",
 219                 .state = PCA9532_OFF,
 220                 .type = PCA9532_TYPE_LED,
 221         },
 222         {       .type = PCA9532_TYPE_NONE },
 223
 224         {       .type = PCA9532_TYPE_NONE },
 225         {       .type = PCA9532_TYPE_NONE },
 226         {       .type = PCA9532_TYPE_NONE },
 227         {       .name = "n2100:red:usb",
 228                 .state = PCA9532_OFF,
 229                 .type = PCA9532_TYPE_LED,
 230         },
 231
 232         {       .type = PCA9532_TYPE_NONE }, /* power OFF gpio */
 233         {       .type = PCA9532_TYPE_NONE }, /* reset gpio */
 234         {       .type = PCA9532_TYPE_NONE },
 235         {       .type = PCA9532_TYPE_NONE },
 236
 237         {       .type = PCA9532_TYPE_NONE },
 238         {       .name = "n2100:orange:system",
 239                 .state = PCA9532_OFF,
 240                 .type = PCA9532_TYPE_LED,
 241         },
 242         {       .name = "n2100:red:system",
 243                 .state = PCA9532_OFF,
 244                 .type = PCA9532_TYPE_LED,
 245         },
 246         {       .name = "N2100 beeper"  ,
 247                 .state =  PCA9532_OFF,
 248                 .type = PCA9532_TYPE_N2100_BEEP,
 249         },
 250         },
 251         .psc = { 0, 0 },
 252         .pwm = { 0, 0 },
 253 };
 254
 255 static struct i2c_board_info __initdata n2100_i2c_devices[] = {
 256         {
 257                 I2C_BOARD_INFO("rs5c372b", 0x32),
 258         },
 259         {
 260                 I2C_BOARD_INFO("f75375", 0x2e),
 261                 .platform_data = &n2100_f75375s,
 262         },
 263         {
 264                 I2C_BOARD_INFO("pca9532", 0x60),
 265                 .platform_data = &n2100_leds,
 266         },
 267 };
 268
 269 /*
 270  * Pull PCA9532 GPIO #8 low to power off the machine.
 271  */
 272 static void n2100_power_off(void)
 273 {
 274         local_irq_disable();
 275
 276         /* Start condition, I2C address of PCA9532, write transaction.  */
 277         *IOP3XX_IDBR0 = 0xc0;
 278         *IOP3XX_ICR0 = 0xe9;
 279         mdelay(1);
 280
 281         /* Write address 0x08.  */
 282         *IOP3XX_IDBR0 = 0x08;
 283         *IOP3XX_ICR0 = 0xe8;
 284         mdelay(1);
 285
 286         /* Write data 0x01, stop condition.  */
 287         *IOP3XX_IDBR0 = 0x01;
 288         *IOP3XX_ICR0 = 0xea;
 289
 290         while (1)
 291                 ;
 292 }
 293
 294
 295 static struct timer_list power_button_poll_timer;
 296
 297 static void power_button_poll(unsigned long dummy)
 298 {
 299         if (gpio_line_get(N2100_POWER_BUTTON) == 0) {
 300                 ctrl_alt_del();
 301                 return;
 302         }
 303
 304         power_button_poll_timer.expires = jiffies + (HZ / 10);
 305         add_timer(&power_button_poll_timer);
 306 }
 307
 308
 309 static void __init n2100_init_machine(void)
 310 {
 311         platform_device_register(&iop3xx_i2c0_device);
 312         platform_device_register(&n2100_flash_device);
 313         platform_device_register(&n2100_serial_device);
 314         platform_device_register(&iop3xx_dma_0_channel);
 315         platform_device_register(&iop3xx_dma_1_channel);
 316
 317         i2c_register_board_info(0, n2100_i2c_devices,
 318                 ARRAY_SIZE(n2100_i2c_devices));
 319
 320         pm_power_off = n2100_power_off;
 321
 322         init_timer(&power_button_poll_timer);
 323         power_button_poll_timer.function = power_button_poll;
 324         power_button_poll_timer.expires = jiffies + (HZ / 10);
 325         add_timer(&power_button_poll_timer);
 326 }
 327
 328 MACHINE_START(N2100, "Thecus N2100")
 329         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 330         .boot_params    = 0xa0000100,
 331         .map_io         = n2100_map_io,
 332         .init_irq       = iop32x_init_irq,
 333         .timer          = &n2100_timer,
 334         .init_machine   = n2100_init_machine,
 335 MACHINE_END