ARM: config: tegra3: enable CONFIG_REGULATOR_USERSPACE_CONSUMER
[linux-2.6.git] / arch / arm / mach-gemini / board-wbd111.c
1 /*
2  *  Support for Wiliboard WBD-111
3  *
4  *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  */
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/leds.h>
15 #include <linux/input.h>
16 #include <linux/skbuff.h>
17 #include <linux/gpio_keys.h>
18 #include <linux/mdio-gpio.h>
19 #include <linux/mtd/mtd.h>
20 #include <linux/mtd/partitions.h>
21 #include <asm/mach-types.h>
22 #include <asm/mach/arch.h>
23 #include <asm/mach/time.h>
24
25
26 #include "common.h"
27
28 static struct gpio_keys_button wbd111_keys[] = {
29         {
30                 .code           = KEY_SETUP,
31                 .gpio           = 5,
32                 .active_low     = 1,
33                 .desc           = "reset",
34                 .type           = EV_KEY,
35         },
36 };
37
38 static struct gpio_keys_platform_data wbd111_keys_data = {
39         .buttons        = wbd111_keys,
40         .nbuttons       = ARRAY_SIZE(wbd111_keys),
41 };
42
43 static struct platform_device wbd111_keys_device = {
44         .name   = "gpio-keys",
45         .id     = -1,
46         .dev    = {
47                 .platform_data = &wbd111_keys_data,
48         },
49 };
50
51 static struct gpio_led wbd111_leds[] = {
52         {
53                 .name                   = "L3red",
54                 .gpio                   = 1,
55         },
56         {
57                 .name                   = "L4green",
58                 .gpio                   = 2,
59         },
60         {
61                 .name                   = "L4red",
62                 .gpio                   = 3,
63         },
64         {
65                 .name                   = "L3green",
66                 .gpio                   = 5,
67         },
68 };
69
70 static struct gpio_led_platform_data wbd111_leds_data = {
71         .num_leds       = ARRAY_SIZE(wbd111_leds),
72         .leds           = wbd111_leds,
73 };
74
75 static struct platform_device wbd111_leds_device = {
76         .name   = "leds-gpio",
77         .id     = -1,
78         .dev    = {
79                 .platform_data = &wbd111_leds_data,
80         },
81 };
82
83 static struct sys_timer wbd111_timer = {
84         .init   = gemini_timer_init,
85 };
86
87 static struct mtd_partition wbd111_partitions[] = {
88         {
89                 .name           = "RedBoot",
90                 .offset         = 0,
91                 .size           = 0x020000,
92                 .mask_flags     = MTD_WRITEABLE,
93         } , {
94                 .name           = "kernel",
95                 .offset         = 0x020000,
96                 .size           = 0x100000,
97         } , {
98                 .name           = "rootfs",
99                 .offset         = 0x120000,
100                 .size           = 0x6a0000,
101         } , {
102                 .name           = "VCTL",
103                 .offset         = 0x7c0000,
104                 .size           = 0x010000,
105                 .mask_flags     = MTD_WRITEABLE,
106         } , {
107                 .name           = "cfg",
108                 .offset         = 0x7d0000,
109                 .size           = 0x010000,
110                 .mask_flags     = MTD_WRITEABLE,
111         } , {
112                 .name           = "FIS",
113                 .offset         = 0x7e0000,
114                 .size           = 0x010000,
115                 .mask_flags     = MTD_WRITEABLE,
116         }
117 };
118 #define wbd111_num_partitions  ARRAY_SIZE(wbd111_partitions)
119
120 static void __init wbd111_init(void)
121 {
122         gemini_gpio_init();
123         platform_register_uart();
124         platform_register_pflash(SZ_8M, wbd111_partitions,
125                                  wbd111_num_partitions);
126         platform_device_register(&wbd111_leds_device);
127         platform_device_register(&wbd111_keys_device);
128         platform_register_rtc();
129 }
130
131 MACHINE_START(WBD111, "Wiliboard WBD-111")
132         .boot_params    = 0x100,
133         .map_io         = gemini_map_io,
134         .init_irq       = gemini_init_irq,
135         .timer          = &wbd111_timer,
136         .init_machine   = wbd111_init,
137 MACHINE_END