Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
[linux-2.6.git] / arch / arm / mach-ep93xx / micro9.c
1 /*
2  *  linux/arch/arm/mach-ep93xx/micro9.c
3  *
4  * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
5  *                   Manfred Gruber <manfred.gruber@contec.at>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/platform_device.h>
15 #include <linux/mtd/physmap.h>
16
17 #include <mach/hardware.h>
18
19 #include <asm/mach-types.h>
20 #include <asm/mach/arch.h>
21
22
23 static struct ep93xx_eth_data micro9_eth_data = {
24         .phy_id         = 0x1f,
25 };
26
27 static void __init micro9_init(void)
28 {
29         ep93xx_register_eth(&micro9_eth_data, 1);
30 }
31
32 /*
33  * Micro9-H
34  */
35 #ifdef CONFIG_MACH_MICRO9H
36 static struct physmap_flash_data micro9h_flash_data = {
37         .width          = 4,
38 };
39
40 static struct resource micro9h_flash_resource = {
41         .start          = EP93XX_CS1_PHYS_BASE,
42         .end            = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
43         .flags          = IORESOURCE_MEM,
44 };
45
46 static struct platform_device micro9h_flash = {
47         .name           = "physmap-flash",
48         .id             = 0,
49         .dev            = {
50                 .platform_data  = &micro9h_flash_data,
51         },
52         .num_resources  = 1,
53         .resource       = &micro9h_flash_resource,
54 };
55
56 static void __init micro9h_init(void)
57 {
58         platform_device_register(&micro9h_flash);
59 }
60
61 static void __init micro9h_init_machine(void)
62 {
63         ep93xx_init_devices();
64         micro9_init();
65         micro9h_init();
66 }
67
68 MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
69         /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
70         .phys_io        = EP93XX_APB_PHYS_BASE,
71         .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
72         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
73         .map_io         = ep93xx_map_io,
74         .init_irq       = ep93xx_init_irq,
75         .timer          = &ep93xx_timer,
76         .init_machine   = micro9h_init_machine,
77 MACHINE_END
78 #endif
79
80 /*
81  * Micro9-M
82  */
83 #ifdef CONFIG_MACH_MICRO9M
84 static void __init micro9m_init_machine(void)
85 {
86         ep93xx_init_devices();
87         micro9_init();
88 }
89
90 MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
91         /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
92         .phys_io        = EP93XX_APB_PHYS_BASE,
93         .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
94         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
95         .map_io         = ep93xx_map_io,
96         .init_irq       = ep93xx_init_irq,
97         .timer          = &ep93xx_timer,
98         .init_machine   = micro9m_init_machine,
99 MACHINE_END
100 #endif
101
102 /*
103  * Micro9-L
104  */
105 #ifdef CONFIG_MACH_MICRO9L
106 static void __init micro9l_init_machine(void)
107 {
108         ep93xx_init_devices();
109         micro9_init();
110 }
111
112 MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
113         /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
114         .phys_io        = EP93XX_APB_PHYS_BASE,
115         .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
116         .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
117         .map_io         = ep93xx_map_io,
118         .init_irq       = ep93xx_init_irq,
119         .timer          = &ep93xx_timer,
120         .init_machine   = micro9l_init_machine,
121 MACHINE_END
122 #endif
123