SELINUX: add /sys/fs/selinux mount point to put selinuxfs
[linux-2.6.git] / arch / arm / mach-aaec2000 / aaed2000.c
1 /*
2  *  linux/arch/arm/mach-aaec2000/aaed2000.c
3  *
4  *  Support for the Agilent AAED-2000 Development Platform.
5  *
6  *  Copyright (c) 2005 Nicolas Bellido Y Ortega
7  *
8  *  This program is free software; you can redistribute it and/or modify
9  *  it under the terms of the GNU General Public License version 2 as
10  *  published by the Free Software Foundation.
11  *
12  */
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/device.h>
17 #include <linux/major.h>
18 #include <linux/interrupt.h>
19
20 #include <asm/setup.h>
21 #include <asm/memory.h>
22 #include <asm/mach-types.h>
23 #include <mach/hardware.h>
24 #include <asm/irq.h>
25
26 #include <asm/mach/arch.h>
27 #include <asm/mach/map.h>
28 #include <asm/mach/irq.h>
29
30 #include <mach/aaed2000.h>
31
32 #include "core.h"
33
34 static void aaed2000_clcd_disable(struct clcd_fb *fb)
35 {
36         AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
37 }
38
39 static void aaed2000_clcd_enable(struct clcd_fb *fb)
40 {
41         AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
42 }
43
44 struct aaec2000_clcd_info clcd_info = {
45         .enable = aaed2000_clcd_enable,
46         .disable = aaed2000_clcd_disable,
47         .panel = {
48                 .mode   = {
49                         .name           = "Sharp",
50                         .refresh        = 60,
51                         .xres           = 640,
52                         .yres           = 480,
53                         .pixclock       = 39721,
54                         .left_margin    = 20,
55                         .right_margin   = 44,
56                         .upper_margin   = 21,
57                         .lower_margin   = 34,
58                         .hsync_len      = 96,
59                         .vsync_len      = 2,
60                         .sync           = 0,
61                         .vmode  = FB_VMODE_NONINTERLACED,
62                 },
63                 .width  = -1,
64                 .height = -1,
65                 .tim2   = TIM2_IVS | TIM2_IHS,
66                 .cntl   = CNTL_LCDTFT,
67                 .bpp    = 16,
68         },
69 };
70
71 static void __init aaed2000_init_irq(void)
72 {
73         aaec2000_init_irq();
74 }
75
76 static void __init aaed2000_init(void)
77 {
78         aaec2000_set_clcd_plat_data(&clcd_info);
79 }
80
81 static struct map_desc aaed2000_io_desc[] __initdata = {
82         {
83                 .virtual        = EXT_GPIO_VBASE,
84                 .pfn            = __phys_to_pfn(EXT_GPIO_PBASE),
85                 .length         = EXT_GPIO_LENGTH,
86                 .type           = MT_DEVICE
87         },
88 };
89
90 static void __init aaed2000_map_io(void)
91 {
92         aaec2000_map_io();
93         iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
94 }
95
96 MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
97         /* Maintainer: Nicolas Bellido Y Ortega */
98         .map_io         = aaed2000_map_io,
99         .init_irq       = aaed2000_init_irq,
100         .timer          = &aaec2000_timer,
101         .init_machine   = aaed2000_init,
102 MACHINE_END