Merge branch 'oprofile/urgent' (early part) into oprofile/perf
[linux-2.6.git] / arch / arm / kernel / perf_event.c
1 #undef DEBUG
2
3 /*
4  * ARM performance counter support.
5  *
6  * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
7  *
8  * ARMv7 support: Jean Pihet <jpihet@mvista.com>
9  * 2010 (c) MontaVista Software, LLC.
10  *
11  * This code is based on the sparc64 perf event code, which is in turn based
12  * on the x86 code. Callchain code is based on the ARM OProfile backtrace
13  * code.
14  */
15 #define pr_fmt(fmt) "hw perfevents: " fmt
16
17 #include <linux/interrupt.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/perf_event.h>
21 #include <linux/platform_device.h>
22 #include <linux/spinlock.h>
23 #include <linux/uaccess.h>
24
25 #include <asm/cputype.h>
26 #include <asm/irq.h>
27 #include <asm/irq_regs.h>
28 #include <asm/pmu.h>
29 #include <asm/stacktrace.h>
30
31 static struct platform_device *pmu_device;
32
33 /*
34  * Hardware lock to serialize accesses to PMU registers. Needed for the
35  * read/modify/write sequences.
36  */
37 DEFINE_SPINLOCK(pmu_lock);
38
39 /*
40  * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
41  * another platform that supports more, we need to increase this to be the
42  * largest of all platforms.
43  *
44  * ARMv7 supports up to 32 events:
45  *  cycle counter CCNT + 31 events counters CNT0..30.
46  *  Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
47  */
48 #define ARMPMU_MAX_HWEVENTS             33
49
50 /* The events for a given CPU. */
51 struct cpu_hw_events {
52         /*
53          * The events that are active on the CPU for the given index. Index 0
54          * is reserved.
55          */
56         struct perf_event       *events[ARMPMU_MAX_HWEVENTS];
57
58         /*
59          * A 1 bit for an index indicates that the counter is being used for
60          * an event. A 0 means that the counter can be used.
61          */
62         unsigned long           used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
63
64         /*
65          * A 1 bit for an index indicates that the counter is actively being
66          * used.
67          */
68         unsigned long           active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
69 };
70 DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
71
72 /* PMU names. */
73 static const char *arm_pmu_names[] = {
74         [ARM_PERF_PMU_ID_XSCALE1] = "xscale1",
75         [ARM_PERF_PMU_ID_XSCALE2] = "xscale2",
76         [ARM_PERF_PMU_ID_V6]      = "v6",
77         [ARM_PERF_PMU_ID_V6MP]    = "v6mpcore",
78         [ARM_PERF_PMU_ID_CA8]     = "ARMv7 Cortex-A8",
79         [ARM_PERF_PMU_ID_CA9]     = "ARMv7 Cortex-A9",
80 };
81
82 struct arm_pmu {
83         enum arm_perf_pmu_ids id;
84         irqreturn_t     (*handle_irq)(int irq_num, void *dev);
85         void            (*enable)(struct hw_perf_event *evt, int idx);
86         void            (*disable)(struct hw_perf_event *evt, int idx);
87         int             (*event_map)(int evt);
88         u64             (*raw_event)(u64);
89         int             (*get_event_idx)(struct cpu_hw_events *cpuc,
90                                          struct hw_perf_event *hwc);
91         u32             (*read_counter)(int idx);
92         void            (*write_counter)(int idx, u32 val);
93         void            (*start)(void);
94         void            (*stop)(void);
95         int             num_events;
96         u64             max_period;
97 };
98
99 /* Set at runtime when we know what CPU type we are. */
100 static const struct arm_pmu *armpmu;
101
102 enum arm_perf_pmu_ids
103 armpmu_get_pmu_id(void)
104 {
105         int id = -ENODEV;
106
107         if (armpmu != NULL)
108                 id = armpmu->id;
109
110         return id;
111 }
112 EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
113
114 int
115 armpmu_get_max_events(void)
116 {
117         int max_events = 0;
118
119         if (armpmu != NULL)
120                 max_events = armpmu->num_events;
121
122         return max_events;
123 }
124 EXPORT_SYMBOL_GPL(armpmu_get_max_events);
125
126 int perf_num_counters(void)
127 {
128         return armpmu_get_max_events();
129 }
130 EXPORT_SYMBOL_GPL(perf_num_counters);
131
132 #define HW_OP_UNSUPPORTED               0xFFFF
133
134 #define C(_x) \
135         PERF_COUNT_HW_CACHE_##_x
136
137 #define CACHE_OP_UNSUPPORTED            0xFFFF
138
139 static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
140                                      [PERF_COUNT_HW_CACHE_OP_MAX]
141                                      [PERF_COUNT_HW_CACHE_RESULT_MAX];
142
143 static int
144 armpmu_map_cache_event(u64 config)
145 {
146         unsigned int cache_type, cache_op, cache_result, ret;
147
148         cache_type = (config >>  0) & 0xff;
149         if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
150                 return -EINVAL;
151
152         cache_op = (config >>  8) & 0xff;
153         if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
154                 return -EINVAL;
155
156         cache_result = (config >> 16) & 0xff;
157         if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
158                 return -EINVAL;
159
160         ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result];
161
162         if (ret == CACHE_OP_UNSUPPORTED)
163                 return -ENOENT;
164
165         return ret;
166 }
167
168 static int
169 armpmu_event_set_period(struct perf_event *event,
170                         struct hw_perf_event *hwc,
171                         int idx)
172 {
173         s64 left = local64_read(&hwc->period_left);
174         s64 period = hwc->sample_period;
175         int ret = 0;
176
177         if (unlikely(left <= -period)) {
178                 left = period;
179                 local64_set(&hwc->period_left, left);
180                 hwc->last_period = period;
181                 ret = 1;
182         }
183
184         if (unlikely(left <= 0)) {
185                 left += period;
186                 local64_set(&hwc->period_left, left);
187                 hwc->last_period = period;
188                 ret = 1;
189         }
190
191         if (left > (s64)armpmu->max_period)
192                 left = armpmu->max_period;
193
194         local64_set(&hwc->prev_count, (u64)-left);
195
196         armpmu->write_counter(idx, (u64)(-left) & 0xffffffff);
197
198         perf_event_update_userpage(event);
199
200         return ret;
201 }
202
203 static u64
204 armpmu_event_update(struct perf_event *event,
205                     struct hw_perf_event *hwc,
206                     int idx)
207 {
208         int shift = 64 - 32;
209         s64 prev_raw_count, new_raw_count;
210         u64 delta;
211
212 again:
213         prev_raw_count = local64_read(&hwc->prev_count);
214         new_raw_count = armpmu->read_counter(idx);
215
216         if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
217                              new_raw_count) != prev_raw_count)
218                 goto again;
219
220         delta = (new_raw_count << shift) - (prev_raw_count << shift);
221         delta >>= shift;
222
223         local64_add(delta, &event->count);
224         local64_sub(delta, &hwc->period_left);
225
226         return new_raw_count;
227 }
228
229 static void
230 armpmu_disable(struct perf_event *event)
231 {
232         struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
233         struct hw_perf_event *hwc = &event->hw;
234         int idx = hwc->idx;
235
236         WARN_ON(idx < 0);
237
238         clear_bit(idx, cpuc->active_mask);
239         armpmu->disable(hwc, idx);
240
241         barrier();
242
243         armpmu_event_update(event, hwc, idx);
244         cpuc->events[idx] = NULL;
245         clear_bit(idx, cpuc->used_mask);
246
247         perf_event_update_userpage(event);
248 }
249
250 static void
251 armpmu_read(struct perf_event *event)
252 {
253         struct hw_perf_event *hwc = &event->hw;
254
255         /* Don't read disabled counters! */
256         if (hwc->idx < 0)
257                 return;
258
259         armpmu_event_update(event, hwc, hwc->idx);
260 }
261
262 static void
263 armpmu_unthrottle(struct perf_event *event)
264 {
265         struct hw_perf_event *hwc = &event->hw;
266
267         /*
268          * Set the period again. Some counters can't be stopped, so when we
269          * were throttled we simply disabled the IRQ source and the counter
270          * may have been left counting. If we don't do this step then we may
271          * get an interrupt too soon or *way* too late if the overflow has
272          * happened since disabling.
273          */
274         armpmu_event_set_period(event, hwc, hwc->idx);
275         armpmu->enable(hwc, hwc->idx);
276 }
277
278 static int
279 armpmu_enable(struct perf_event *event)
280 {
281         struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
282         struct hw_perf_event *hwc = &event->hw;
283         int idx;
284         int err = 0;
285
286         /* If we don't have a space for the counter then finish early. */
287         idx = armpmu->get_event_idx(cpuc, hwc);
288         if (idx < 0) {
289                 err = idx;
290                 goto out;
291         }
292
293         /*
294          * If there is an event in the counter we are going to use then make
295          * sure it is disabled.
296          */
297         event->hw.idx = idx;
298         armpmu->disable(hwc, idx);
299         cpuc->events[idx] = event;
300         set_bit(idx, cpuc->active_mask);
301
302         /* Set the period for the event. */
303         armpmu_event_set_period(event, hwc, idx);
304
305         /* Enable the event. */
306         armpmu->enable(hwc, idx);
307
308         /* Propagate our changes to the userspace mapping. */
309         perf_event_update_userpage(event);
310
311 out:
312         return err;
313 }
314
315 static struct pmu pmu = {
316         .enable     = armpmu_enable,
317         .disable    = armpmu_disable,
318         .unthrottle = armpmu_unthrottle,
319         .read       = armpmu_read,
320 };
321
322 static int
323 validate_event(struct cpu_hw_events *cpuc,
324                struct perf_event *event)
325 {
326         struct hw_perf_event fake_event = event->hw;
327
328         if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
329                 return 1;
330
331         return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
332 }
333
334 static int
335 validate_group(struct perf_event *event)
336 {
337         struct perf_event *sibling, *leader = event->group_leader;
338         struct cpu_hw_events fake_pmu;
339
340         memset(&fake_pmu, 0, sizeof(fake_pmu));
341
342         if (!validate_event(&fake_pmu, leader))
343                 return -ENOSPC;
344
345         list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
346                 if (!validate_event(&fake_pmu, sibling))
347                         return -ENOSPC;
348         }
349
350         if (!validate_event(&fake_pmu, event))
351                 return -ENOSPC;
352
353         return 0;
354 }
355
356 static int
357 armpmu_reserve_hardware(void)
358 {
359         int i, err = -ENODEV, irq;
360
361         pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU);
362         if (IS_ERR(pmu_device)) {
363                 pr_warning("unable to reserve pmu\n");
364                 return PTR_ERR(pmu_device);
365         }
366
367         init_pmu(ARM_PMU_DEVICE_CPU);
368
369         if (pmu_device->num_resources < 1) {
370                 pr_err("no irqs for PMUs defined\n");
371                 return -ENODEV;
372         }
373
374         for (i = 0; i < pmu_device->num_resources; ++i) {
375                 irq = platform_get_irq(pmu_device, i);
376                 if (irq < 0)
377                         continue;
378
379                 err = request_irq(irq, armpmu->handle_irq,
380                                   IRQF_DISABLED | IRQF_NOBALANCING,
381                                   "armpmu", NULL);
382                 if (err) {
383                         pr_warning("unable to request IRQ%d for ARM perf "
384                                 "counters\n", irq);
385                         break;
386                 }
387         }
388
389         if (err) {
390                 for (i = i - 1; i >= 0; --i) {
391                         irq = platform_get_irq(pmu_device, i);
392                         if (irq >= 0)
393                                 free_irq(irq, NULL);
394                 }
395                 release_pmu(pmu_device);
396                 pmu_device = NULL;
397         }
398
399         return err;
400 }
401
402 static void
403 armpmu_release_hardware(void)
404 {
405         int i, irq;
406
407         for (i = pmu_device->num_resources - 1; i >= 0; --i) {
408                 irq = platform_get_irq(pmu_device, i);
409                 if (irq >= 0)
410                         free_irq(irq, NULL);
411         }
412         armpmu->stop();
413
414         release_pmu(pmu_device);
415         pmu_device = NULL;
416 }
417
418 static atomic_t active_events = ATOMIC_INIT(0);
419 static DEFINE_MUTEX(pmu_reserve_mutex);
420
421 static void
422 hw_perf_event_destroy(struct perf_event *event)
423 {
424         if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) {
425                 armpmu_release_hardware();
426                 mutex_unlock(&pmu_reserve_mutex);
427         }
428 }
429
430 static int
431 __hw_perf_event_init(struct perf_event *event)
432 {
433         struct hw_perf_event *hwc = &event->hw;
434         int mapping, err;
435
436         /* Decode the generic type into an ARM event identifier. */
437         if (PERF_TYPE_HARDWARE == event->attr.type) {
438                 mapping = armpmu->event_map(event->attr.config);
439         } else if (PERF_TYPE_HW_CACHE == event->attr.type) {
440                 mapping = armpmu_map_cache_event(event->attr.config);
441         } else if (PERF_TYPE_RAW == event->attr.type) {
442                 mapping = armpmu->raw_event(event->attr.config);
443         } else {
444                 pr_debug("event type %x not supported\n", event->attr.type);
445                 return -EOPNOTSUPP;
446         }
447
448         if (mapping < 0) {
449                 pr_debug("event %x:%llx not supported\n", event->attr.type,
450                          event->attr.config);
451                 return mapping;
452         }
453
454         /*
455          * Check whether we need to exclude the counter from certain modes.
456          * The ARM performance counters are on all of the time so if someone
457          * has asked us for some excludes then we have to fail.
458          */
459         if (event->attr.exclude_kernel || event->attr.exclude_user ||
460             event->attr.exclude_hv || event->attr.exclude_idle) {
461                 pr_debug("ARM performance counters do not support "
462                          "mode exclusion\n");
463                 return -EPERM;
464         }
465
466         /*
467          * We don't assign an index until we actually place the event onto
468          * hardware. Use -1 to signify that we haven't decided where to put it
469          * yet. For SMP systems, each core has it's own PMU so we can't do any
470          * clever allocation or constraints checking at this point.
471          */
472         hwc->idx = -1;
473
474         /*
475          * Store the event encoding into the config_base field. config and
476          * event_base are unused as the only 2 things we need to know are
477          * the event mapping and the counter to use. The counter to use is
478          * also the indx and the config_base is the event type.
479          */
480         hwc->config_base            = (unsigned long)mapping;
481         hwc->config                 = 0;
482         hwc->event_base             = 0;
483
484         if (!hwc->sample_period) {
485                 hwc->sample_period  = armpmu->max_period;
486                 hwc->last_period    = hwc->sample_period;
487                 local64_set(&hwc->period_left, hwc->sample_period);
488         }
489
490         err = 0;
491         if (event->group_leader != event) {
492                 err = validate_group(event);
493                 if (err)
494                         return -EINVAL;
495         }
496
497         return err;
498 }
499
500 const struct pmu *
501 hw_perf_event_init(struct perf_event *event)
502 {
503         int err = 0;
504
505         if (!armpmu)
506                 return ERR_PTR(-ENODEV);
507
508         event->destroy = hw_perf_event_destroy;
509
510         if (!atomic_inc_not_zero(&active_events)) {
511                 if (atomic_read(&active_events) > perf_max_events) {
512                         atomic_dec(&active_events);
513                         return ERR_PTR(-ENOSPC);
514                 }
515
516                 mutex_lock(&pmu_reserve_mutex);
517                 if (atomic_read(&active_events) == 0) {
518                         err = armpmu_reserve_hardware();
519                 }
520
521                 if (!err)
522                         atomic_inc(&active_events);
523                 mutex_unlock(&pmu_reserve_mutex);
524         }
525
526         if (err)
527                 return ERR_PTR(err);
528
529         err = __hw_perf_event_init(event);
530         if (err)
531                 hw_perf_event_destroy(event);
532
533         return err ? ERR_PTR(err) : &pmu;
534 }
535
536 void
537 hw_perf_enable(void)
538 {
539         /* Enable all of the perf events on hardware. */
540         int idx;
541         struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
542
543         if (!armpmu)
544                 return;
545
546         for (idx = 0; idx <= armpmu->num_events; ++idx) {
547                 struct perf_event *event = cpuc->events[idx];
548
549                 if (!event)
550                         continue;
551
552                 armpmu->enable(&event->hw, idx);
553         }
554
555         armpmu->start();
556 }
557
558 void
559 hw_perf_disable(void)
560 {
561         if (armpmu)
562                 armpmu->stop();
563 }
564
565 /*
566  * ARMv6 Performance counter handling code.
567  *
568  * ARMv6 has 2 configurable performance counters and a single cycle counter.
569  * They all share a single reset bit but can be written to zero so we can use
570  * that for a reset.
571  *
572  * The counters can't be individually enabled or disabled so when we remove
573  * one event and replace it with another we could get spurious counts from the
574  * wrong event. However, we can take advantage of the fact that the
575  * performance counters can export events to the event bus, and the event bus
576  * itself can be monitored. This requires that we *don't* export the events to
577  * the event bus. The procedure for disabling a configurable counter is:
578  *      - change the counter to count the ETMEXTOUT[0] signal (0x20). This
579  *        effectively stops the counter from counting.
580  *      - disable the counter's interrupt generation (each counter has it's
581  *        own interrupt enable bit).
582  * Once stopped, the counter value can be written as 0 to reset.
583  *
584  * To enable a counter:
585  *      - enable the counter's interrupt generation.
586  *      - set the new event type.
587  *
588  * Note: the dedicated cycle counter only counts cycles and can't be
589  * enabled/disabled independently of the others. When we want to disable the
590  * cycle counter, we have to just disable the interrupt reporting and start
591  * ignoring that counter. When re-enabling, we have to reset the value and
592  * enable the interrupt.
593  */
594
595 enum armv6_perf_types {
596         ARMV6_PERFCTR_ICACHE_MISS           = 0x0,
597         ARMV6_PERFCTR_IBUF_STALL            = 0x1,
598         ARMV6_PERFCTR_DDEP_STALL            = 0x2,
599         ARMV6_PERFCTR_ITLB_MISS             = 0x3,
600         ARMV6_PERFCTR_DTLB_MISS             = 0x4,
601         ARMV6_PERFCTR_BR_EXEC               = 0x5,
602         ARMV6_PERFCTR_BR_MISPREDICT         = 0x6,
603         ARMV6_PERFCTR_INSTR_EXEC            = 0x7,
604         ARMV6_PERFCTR_DCACHE_HIT            = 0x9,
605         ARMV6_PERFCTR_DCACHE_ACCESS         = 0xA,
606         ARMV6_PERFCTR_DCACHE_MISS           = 0xB,
607         ARMV6_PERFCTR_DCACHE_WBACK          = 0xC,
608         ARMV6_PERFCTR_SW_PC_CHANGE          = 0xD,
609         ARMV6_PERFCTR_MAIN_TLB_MISS         = 0xF,
610         ARMV6_PERFCTR_EXPL_D_ACCESS         = 0x10,
611         ARMV6_PERFCTR_LSU_FULL_STALL        = 0x11,
612         ARMV6_PERFCTR_WBUF_DRAINED          = 0x12,
613         ARMV6_PERFCTR_CPU_CYCLES            = 0xFF,
614         ARMV6_PERFCTR_NOP                   = 0x20,
615 };
616
617 enum armv6_counters {
618         ARMV6_CYCLE_COUNTER = 1,
619         ARMV6_COUNTER0,
620         ARMV6_COUNTER1,
621 };
622
623 /*
624  * The hardware events that we support. We do support cache operations but
625  * we have harvard caches and no way to combine instruction and data
626  * accesses/misses in hardware.
627  */
628 static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
629         [PERF_COUNT_HW_CPU_CYCLES]          = ARMV6_PERFCTR_CPU_CYCLES,
630         [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV6_PERFCTR_INSTR_EXEC,
631         [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
632         [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
633         [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
634         [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV6_PERFCTR_BR_MISPREDICT,
635         [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
636 };
637
638 static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
639                                           [PERF_COUNT_HW_CACHE_OP_MAX]
640                                           [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
641         [C(L1D)] = {
642                 /*
643                  * The performance counters don't differentiate between read
644                  * and write accesses/misses so this isn't strictly correct,
645                  * but it's the best we can do. Writes and reads get
646                  * combined.
647                  */
648                 [C(OP_READ)] = {
649                         [C(RESULT_ACCESS)]      = ARMV6_PERFCTR_DCACHE_ACCESS,
650                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DCACHE_MISS,
651                 },
652                 [C(OP_WRITE)] = {
653                         [C(RESULT_ACCESS)]      = ARMV6_PERFCTR_DCACHE_ACCESS,
654                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DCACHE_MISS,
655                 },
656                 [C(OP_PREFETCH)] = {
657                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
658                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
659                 },
660         },
661         [C(L1I)] = {
662                 [C(OP_READ)] = {
663                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
664                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ICACHE_MISS,
665                 },
666                 [C(OP_WRITE)] = {
667                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
668                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ICACHE_MISS,
669                 },
670                 [C(OP_PREFETCH)] = {
671                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
672                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
673                 },
674         },
675         [C(LL)] = {
676                 [C(OP_READ)] = {
677                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
678                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
679                 },
680                 [C(OP_WRITE)] = {
681                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
682                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
683                 },
684                 [C(OP_PREFETCH)] = {
685                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
686                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
687                 },
688         },
689         [C(DTLB)] = {
690                 /*
691                  * The ARM performance counters can count micro DTLB misses,
692                  * micro ITLB misses and main TLB misses. There isn't an event
693                  * for TLB misses, so use the micro misses here and if users
694                  * want the main TLB misses they can use a raw counter.
695                  */
696                 [C(OP_READ)] = {
697                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
698                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DTLB_MISS,
699                 },
700                 [C(OP_WRITE)] = {
701                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
702                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_DTLB_MISS,
703                 },
704                 [C(OP_PREFETCH)] = {
705                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
706                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
707                 },
708         },
709         [C(ITLB)] = {
710                 [C(OP_READ)] = {
711                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
712                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ITLB_MISS,
713                 },
714                 [C(OP_WRITE)] = {
715                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
716                         [C(RESULT_MISS)]        = ARMV6_PERFCTR_ITLB_MISS,
717                 },
718                 [C(OP_PREFETCH)] = {
719                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
720                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
721                 },
722         },
723         [C(BPU)] = {
724                 [C(OP_READ)] = {
725                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
726                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
727                 },
728                 [C(OP_WRITE)] = {
729                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
730                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
731                 },
732                 [C(OP_PREFETCH)] = {
733                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
734                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
735                 },
736         },
737 };
738
739 enum armv6mpcore_perf_types {
740         ARMV6MPCORE_PERFCTR_ICACHE_MISS     = 0x0,
741         ARMV6MPCORE_PERFCTR_IBUF_STALL      = 0x1,
742         ARMV6MPCORE_PERFCTR_DDEP_STALL      = 0x2,
743         ARMV6MPCORE_PERFCTR_ITLB_MISS       = 0x3,
744         ARMV6MPCORE_PERFCTR_DTLB_MISS       = 0x4,
745         ARMV6MPCORE_PERFCTR_BR_EXEC         = 0x5,
746         ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
747         ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
748         ARMV6MPCORE_PERFCTR_INSTR_EXEC      = 0x8,
749         ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
750         ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
751         ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
752         ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
753         ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
754         ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
755         ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
756         ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
757         ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
758         ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
759         ARMV6MPCORE_PERFCTR_CPU_CYCLES      = 0xFF,
760 };
761
762 /*
763  * The hardware events that we support. We do support cache operations but
764  * we have harvard caches and no way to combine instruction and data
765  * accesses/misses in hardware.
766  */
767 static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
768         [PERF_COUNT_HW_CPU_CYCLES]          = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
769         [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
770         [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
771         [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
772         [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
773         [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
774         [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
775 };
776
777 static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
778                                         [PERF_COUNT_HW_CACHE_OP_MAX]
779                                         [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
780         [C(L1D)] = {
781                 [C(OP_READ)] = {
782                         [C(RESULT_ACCESS)]  =
783                                 ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
784                         [C(RESULT_MISS)]    =
785                                 ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
786                 },
787                 [C(OP_WRITE)] = {
788                         [C(RESULT_ACCESS)]  =
789                                 ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
790                         [C(RESULT_MISS)]    =
791                                 ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
792                 },
793                 [C(OP_PREFETCH)] = {
794                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
795                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
796                 },
797         },
798         [C(L1I)] = {
799                 [C(OP_READ)] = {
800                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
801                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
802                 },
803                 [C(OP_WRITE)] = {
804                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
805                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
806                 },
807                 [C(OP_PREFETCH)] = {
808                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
809                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
810                 },
811         },
812         [C(LL)] = {
813                 [C(OP_READ)] = {
814                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
815                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
816                 },
817                 [C(OP_WRITE)] = {
818                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
819                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
820                 },
821                 [C(OP_PREFETCH)] = {
822                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
823                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
824                 },
825         },
826         [C(DTLB)] = {
827                 /*
828                  * The ARM performance counters can count micro DTLB misses,
829                  * micro ITLB misses and main TLB misses. There isn't an event
830                  * for TLB misses, so use the micro misses here and if users
831                  * want the main TLB misses they can use a raw counter.
832                  */
833                 [C(OP_READ)] = {
834                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
835                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
836                 },
837                 [C(OP_WRITE)] = {
838                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
839                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
840                 },
841                 [C(OP_PREFETCH)] = {
842                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
843                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
844                 },
845         },
846         [C(ITLB)] = {
847                 [C(OP_READ)] = {
848                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
849                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
850                 },
851                 [C(OP_WRITE)] = {
852                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
853                         [C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
854                 },
855                 [C(OP_PREFETCH)] = {
856                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
857                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
858                 },
859         },
860         [C(BPU)] = {
861                 [C(OP_READ)] = {
862                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
863                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
864                 },
865                 [C(OP_WRITE)] = {
866                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
867                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
868                 },
869                 [C(OP_PREFETCH)] = {
870                         [C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
871                         [C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
872                 },
873         },
874 };
875
876 static inline unsigned long
877 armv6_pmcr_read(void)
878 {
879         u32 val;
880         asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
881         return val;
882 }
883
884 static inline void
885 armv6_pmcr_write(unsigned long val)
886 {
887         asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
888 }
889
890 #define ARMV6_PMCR_ENABLE               (1 << 0)
891 #define ARMV6_PMCR_CTR01_RESET          (1 << 1)
892 #define ARMV6_PMCR_CCOUNT_RESET         (1 << 2)
893 #define ARMV6_PMCR_CCOUNT_DIV           (1 << 3)
894 #define ARMV6_PMCR_COUNT0_IEN           (1 << 4)
895 #define ARMV6_PMCR_COUNT1_IEN           (1 << 5)
896 #define ARMV6_PMCR_CCOUNT_IEN           (1 << 6)
897 #define ARMV6_PMCR_COUNT0_OVERFLOW      (1 << 8)
898 #define ARMV6_PMCR_COUNT1_OVERFLOW      (1 << 9)
899 #define ARMV6_PMCR_CCOUNT_OVERFLOW      (1 << 10)
900 #define ARMV6_PMCR_EVT_COUNT0_SHIFT     20
901 #define ARMV6_PMCR_EVT_COUNT0_MASK      (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
902 #define ARMV6_PMCR_EVT_COUNT1_SHIFT     12
903 #define ARMV6_PMCR_EVT_COUNT1_MASK      (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
904
905 #define ARMV6_PMCR_OVERFLOWED_MASK \
906         (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
907          ARMV6_PMCR_CCOUNT_OVERFLOW)
908
909 static inline int
910 armv6_pmcr_has_overflowed(unsigned long pmcr)
911 {
912         return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK);
913 }
914
915 static inline int
916 armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
917                                   enum armv6_counters counter)
918 {
919         int ret = 0;
920
921         if (ARMV6_CYCLE_COUNTER == counter)
922                 ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
923         else if (ARMV6_COUNTER0 == counter)
924                 ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
925         else if (ARMV6_COUNTER1 == counter)
926                 ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
927         else
928                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
929
930         return ret;
931 }
932
933 static inline u32
934 armv6pmu_read_counter(int counter)
935 {
936         unsigned long value = 0;
937
938         if (ARMV6_CYCLE_COUNTER == counter)
939                 asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
940         else if (ARMV6_COUNTER0 == counter)
941                 asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
942         else if (ARMV6_COUNTER1 == counter)
943                 asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
944         else
945                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
946
947         return value;
948 }
949
950 static inline void
951 armv6pmu_write_counter(int counter,
952                        u32 value)
953 {
954         if (ARMV6_CYCLE_COUNTER == counter)
955                 asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
956         else if (ARMV6_COUNTER0 == counter)
957                 asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
958         else if (ARMV6_COUNTER1 == counter)
959                 asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
960         else
961                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
962 }
963
964 void
965 armv6pmu_enable_event(struct hw_perf_event *hwc,
966                       int idx)
967 {
968         unsigned long val, mask, evt, flags;
969
970         if (ARMV6_CYCLE_COUNTER == idx) {
971                 mask    = 0;
972                 evt     = ARMV6_PMCR_CCOUNT_IEN;
973         } else if (ARMV6_COUNTER0 == idx) {
974                 mask    = ARMV6_PMCR_EVT_COUNT0_MASK;
975                 evt     = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
976                           ARMV6_PMCR_COUNT0_IEN;
977         } else if (ARMV6_COUNTER1 == idx) {
978                 mask    = ARMV6_PMCR_EVT_COUNT1_MASK;
979                 evt     = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
980                           ARMV6_PMCR_COUNT1_IEN;
981         } else {
982                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
983                 return;
984         }
985
986         /*
987          * Mask out the current event and set the counter to count the event
988          * that we're interested in.
989          */
990         spin_lock_irqsave(&pmu_lock, flags);
991         val = armv6_pmcr_read();
992         val &= ~mask;
993         val |= evt;
994         armv6_pmcr_write(val);
995         spin_unlock_irqrestore(&pmu_lock, flags);
996 }
997
998 static irqreturn_t
999 armv6pmu_handle_irq(int irq_num,
1000                     void *dev)
1001 {
1002         unsigned long pmcr = armv6_pmcr_read();
1003         struct perf_sample_data data;
1004         struct cpu_hw_events *cpuc;
1005         struct pt_regs *regs;
1006         int idx;
1007
1008         if (!armv6_pmcr_has_overflowed(pmcr))
1009                 return IRQ_NONE;
1010
1011         regs = get_irq_regs();
1012
1013         /*
1014          * The interrupts are cleared by writing the overflow flags back to
1015          * the control register. All of the other bits don't have any effect
1016          * if they are rewritten, so write the whole value back.
1017          */
1018         armv6_pmcr_write(pmcr);
1019
1020         perf_sample_data_init(&data, 0);
1021
1022         cpuc = &__get_cpu_var(cpu_hw_events);
1023         for (idx = 0; idx <= armpmu->num_events; ++idx) {
1024                 struct perf_event *event = cpuc->events[idx];
1025                 struct hw_perf_event *hwc;
1026
1027                 if (!test_bit(idx, cpuc->active_mask))
1028                         continue;
1029
1030                 /*
1031                  * We have a single interrupt for all counters. Check that
1032                  * each counter has overflowed before we process it.
1033                  */
1034                 if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
1035                         continue;
1036
1037                 hwc = &event->hw;
1038                 armpmu_event_update(event, hwc, idx);
1039                 data.period = event->hw.last_period;
1040                 if (!armpmu_event_set_period(event, hwc, idx))
1041                         continue;
1042
1043                 if (perf_event_overflow(event, 0, &data, regs))
1044                         armpmu->disable(hwc, idx);
1045         }
1046
1047         /*
1048          * Handle the pending perf events.
1049          *
1050          * Note: this call *must* be run with interrupts disabled. For
1051          * platforms that can have the PMU interrupts raised as an NMI, this
1052          * will not work.
1053          */
1054         perf_event_do_pending();
1055
1056         return IRQ_HANDLED;
1057 }
1058
1059 static void
1060 armv6pmu_start(void)
1061 {
1062         unsigned long flags, val;
1063
1064         spin_lock_irqsave(&pmu_lock, flags);
1065         val = armv6_pmcr_read();
1066         val |= ARMV6_PMCR_ENABLE;
1067         armv6_pmcr_write(val);
1068         spin_unlock_irqrestore(&pmu_lock, flags);
1069 }
1070
1071 void
1072 armv6pmu_stop(void)
1073 {
1074         unsigned long flags, val;
1075
1076         spin_lock_irqsave(&pmu_lock, flags);
1077         val = armv6_pmcr_read();
1078         val &= ~ARMV6_PMCR_ENABLE;
1079         armv6_pmcr_write(val);
1080         spin_unlock_irqrestore(&pmu_lock, flags);
1081 }
1082
1083 static inline int
1084 armv6pmu_event_map(int config)
1085 {
1086         int mapping = armv6_perf_map[config];
1087         if (HW_OP_UNSUPPORTED == mapping)
1088                 mapping = -EOPNOTSUPP;
1089         return mapping;
1090 }
1091
1092 static inline int
1093 armv6mpcore_pmu_event_map(int config)
1094 {
1095         int mapping = armv6mpcore_perf_map[config];
1096         if (HW_OP_UNSUPPORTED == mapping)
1097                 mapping = -EOPNOTSUPP;
1098         return mapping;
1099 }
1100
1101 static u64
1102 armv6pmu_raw_event(u64 config)
1103 {
1104         return config & 0xff;
1105 }
1106
1107 static int
1108 armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
1109                        struct hw_perf_event *event)
1110 {
1111         /* Always place a cycle counter into the cycle counter. */
1112         if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
1113                 if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
1114                         return -EAGAIN;
1115
1116                 return ARMV6_CYCLE_COUNTER;
1117         } else {
1118                 /*
1119                  * For anything other than a cycle counter, try and use
1120                  * counter0 and counter1.
1121                  */
1122                 if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) {
1123                         return ARMV6_COUNTER1;
1124                 }
1125
1126                 if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) {
1127                         return ARMV6_COUNTER0;
1128                 }
1129
1130                 /* The counters are all in use. */
1131                 return -EAGAIN;
1132         }
1133 }
1134
1135 static void
1136 armv6pmu_disable_event(struct hw_perf_event *hwc,
1137                        int idx)
1138 {
1139         unsigned long val, mask, evt, flags;
1140
1141         if (ARMV6_CYCLE_COUNTER == idx) {
1142                 mask    = ARMV6_PMCR_CCOUNT_IEN;
1143                 evt     = 0;
1144         } else if (ARMV6_COUNTER0 == idx) {
1145                 mask    = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
1146                 evt     = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
1147         } else if (ARMV6_COUNTER1 == idx) {
1148                 mask    = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
1149                 evt     = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
1150         } else {
1151                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
1152                 return;
1153         }
1154
1155         /*
1156          * Mask out the current event and set the counter to count the number
1157          * of ETM bus signal assertion cycles. The external reporting should
1158          * be disabled and so this should never increment.
1159          */
1160         spin_lock_irqsave(&pmu_lock, flags);
1161         val = armv6_pmcr_read();
1162         val &= ~mask;
1163         val |= evt;
1164         armv6_pmcr_write(val);
1165         spin_unlock_irqrestore(&pmu_lock, flags);
1166 }
1167
1168 static void
1169 armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
1170                               int idx)
1171 {
1172         unsigned long val, mask, flags, evt = 0;
1173
1174         if (ARMV6_CYCLE_COUNTER == idx) {
1175                 mask    = ARMV6_PMCR_CCOUNT_IEN;
1176         } else if (ARMV6_COUNTER0 == idx) {
1177                 mask    = ARMV6_PMCR_COUNT0_IEN;
1178         } else if (ARMV6_COUNTER1 == idx) {
1179                 mask    = ARMV6_PMCR_COUNT1_IEN;
1180         } else {
1181                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
1182                 return;
1183         }
1184
1185         /*
1186          * Unlike UP ARMv6, we don't have a way of stopping the counters. We
1187          * simply disable the interrupt reporting.
1188          */
1189         spin_lock_irqsave(&pmu_lock, flags);
1190         val = armv6_pmcr_read();
1191         val &= ~mask;
1192         val |= evt;
1193         armv6_pmcr_write(val);
1194         spin_unlock_irqrestore(&pmu_lock, flags);
1195 }
1196
1197 static const struct arm_pmu armv6pmu = {
1198         .id                     = ARM_PERF_PMU_ID_V6,
1199         .handle_irq             = armv6pmu_handle_irq,
1200         .enable                 = armv6pmu_enable_event,
1201         .disable                = armv6pmu_disable_event,
1202         .event_map              = armv6pmu_event_map,
1203         .raw_event              = armv6pmu_raw_event,
1204         .read_counter           = armv6pmu_read_counter,
1205         .write_counter          = armv6pmu_write_counter,
1206         .get_event_idx          = armv6pmu_get_event_idx,
1207         .start                  = armv6pmu_start,
1208         .stop                   = armv6pmu_stop,
1209         .num_events             = 3,
1210         .max_period             = (1LLU << 32) - 1,
1211 };
1212
1213 /*
1214  * ARMv6mpcore is almost identical to single core ARMv6 with the exception
1215  * that some of the events have different enumerations and that there is no
1216  * *hack* to stop the programmable counters. To stop the counters we simply
1217  * disable the interrupt reporting and update the event. When unthrottling we
1218  * reset the period and enable the interrupt reporting.
1219  */
1220 static const struct arm_pmu armv6mpcore_pmu = {
1221         .id                     = ARM_PERF_PMU_ID_V6MP,
1222         .handle_irq             = armv6pmu_handle_irq,
1223         .enable                 = armv6pmu_enable_event,
1224         .disable                = armv6mpcore_pmu_disable_event,
1225         .event_map              = armv6mpcore_pmu_event_map,
1226         .raw_event              = armv6pmu_raw_event,
1227         .read_counter           = armv6pmu_read_counter,
1228         .write_counter          = armv6pmu_write_counter,
1229         .get_event_idx          = armv6pmu_get_event_idx,
1230         .start                  = armv6pmu_start,
1231         .stop                   = armv6pmu_stop,
1232         .num_events             = 3,
1233         .max_period             = (1LLU << 32) - 1,
1234 };
1235
1236 /*
1237  * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
1238  *
1239  * Copied from ARMv6 code, with the low level code inspired
1240  *  by the ARMv7 Oprofile code.
1241  *
1242  * Cortex-A8 has up to 4 configurable performance counters and
1243  *  a single cycle counter.
1244  * Cortex-A9 has up to 31 configurable performance counters and
1245  *  a single cycle counter.
1246  *
1247  * All counters can be enabled/disabled and IRQ masked separately. The cycle
1248  *  counter and all 4 performance counters together can be reset separately.
1249  */
1250
1251 /* Common ARMv7 event types */
1252 enum armv7_perf_types {
1253         ARMV7_PERFCTR_PMNC_SW_INCR              = 0x00,
1254         ARMV7_PERFCTR_IFETCH_MISS               = 0x01,
1255         ARMV7_PERFCTR_ITLB_MISS                 = 0x02,
1256         ARMV7_PERFCTR_DCACHE_REFILL             = 0x03,
1257         ARMV7_PERFCTR_DCACHE_ACCESS             = 0x04,
1258         ARMV7_PERFCTR_DTLB_REFILL               = 0x05,
1259         ARMV7_PERFCTR_DREAD                     = 0x06,
1260         ARMV7_PERFCTR_DWRITE                    = 0x07,
1261
1262         ARMV7_PERFCTR_EXC_TAKEN                 = 0x09,
1263         ARMV7_PERFCTR_EXC_EXECUTED              = 0x0A,
1264         ARMV7_PERFCTR_CID_WRITE                 = 0x0B,
1265         /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
1266          * It counts:
1267          *  - all branch instructions,
1268          *  - instructions that explicitly write the PC,
1269          *  - exception generating instructions.
1270          */
1271         ARMV7_PERFCTR_PC_WRITE                  = 0x0C,
1272         ARMV7_PERFCTR_PC_IMM_BRANCH             = 0x0D,
1273         ARMV7_PERFCTR_UNALIGNED_ACCESS          = 0x0F,
1274         ARMV7_PERFCTR_PC_BRANCH_MIS_PRED        = 0x10,
1275         ARMV7_PERFCTR_CLOCK_CYCLES              = 0x11,
1276
1277         ARMV7_PERFCTR_PC_BRANCH_MIS_USED        = 0x12,
1278
1279         ARMV7_PERFCTR_CPU_CYCLES                = 0xFF
1280 };
1281
1282 /* ARMv7 Cortex-A8 specific event types */
1283 enum armv7_a8_perf_types {
1284         ARMV7_PERFCTR_INSTR_EXECUTED            = 0x08,
1285
1286         ARMV7_PERFCTR_PC_PROC_RETURN            = 0x0E,
1287
1288         ARMV7_PERFCTR_WRITE_BUFFER_FULL         = 0x40,
1289         ARMV7_PERFCTR_L2_STORE_MERGED           = 0x41,
1290         ARMV7_PERFCTR_L2_STORE_BUFF             = 0x42,
1291         ARMV7_PERFCTR_L2_ACCESS                 = 0x43,
1292         ARMV7_PERFCTR_L2_CACH_MISS              = 0x44,
1293         ARMV7_PERFCTR_AXI_READ_CYCLES           = 0x45,
1294         ARMV7_PERFCTR_AXI_WRITE_CYCLES          = 0x46,
1295         ARMV7_PERFCTR_MEMORY_REPLAY             = 0x47,
1296         ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY   = 0x48,
1297         ARMV7_PERFCTR_L1_DATA_MISS              = 0x49,
1298         ARMV7_PERFCTR_L1_INST_MISS              = 0x4A,
1299         ARMV7_PERFCTR_L1_DATA_COLORING          = 0x4B,
1300         ARMV7_PERFCTR_L1_NEON_DATA              = 0x4C,
1301         ARMV7_PERFCTR_L1_NEON_CACH_DATA         = 0x4D,
1302         ARMV7_PERFCTR_L2_NEON                   = 0x4E,
1303         ARMV7_PERFCTR_L2_NEON_HIT               = 0x4F,
1304         ARMV7_PERFCTR_L1_INST                   = 0x50,
1305         ARMV7_PERFCTR_PC_RETURN_MIS_PRED        = 0x51,
1306         ARMV7_PERFCTR_PC_BRANCH_FAILED          = 0x52,
1307         ARMV7_PERFCTR_PC_BRANCH_TAKEN           = 0x53,
1308         ARMV7_PERFCTR_PC_BRANCH_EXECUTED        = 0x54,
1309         ARMV7_PERFCTR_OP_EXECUTED               = 0x55,
1310         ARMV7_PERFCTR_CYCLES_INST_STALL         = 0x56,
1311         ARMV7_PERFCTR_CYCLES_INST               = 0x57,
1312         ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL    = 0x58,
1313         ARMV7_PERFCTR_CYCLES_NEON_INST_STALL    = 0x59,
1314         ARMV7_PERFCTR_NEON_CYCLES               = 0x5A,
1315
1316         ARMV7_PERFCTR_PMU0_EVENTS               = 0x70,
1317         ARMV7_PERFCTR_PMU1_EVENTS               = 0x71,
1318         ARMV7_PERFCTR_PMU_EVENTS                = 0x72,
1319 };
1320
1321 /* ARMv7 Cortex-A9 specific event types */
1322 enum armv7_a9_perf_types {
1323         ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC     = 0x40,
1324         ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC     = 0x41,
1325         ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC       = 0x42,
1326
1327         ARMV7_PERFCTR_COHERENT_LINE_MISS        = 0x50,
1328         ARMV7_PERFCTR_COHERENT_LINE_HIT         = 0x51,
1329
1330         ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES   = 0x60,
1331         ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES   = 0x61,
1332         ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
1333         ARMV7_PERFCTR_STREX_EXECUTED_PASSED     = 0x63,
1334         ARMV7_PERFCTR_STREX_EXECUTED_FAILED     = 0x64,
1335         ARMV7_PERFCTR_DATA_EVICTION             = 0x65,
1336         ARMV7_PERFCTR_ISSUE_STAGE_NO_INST       = 0x66,
1337         ARMV7_PERFCTR_ISSUE_STAGE_EMPTY         = 0x67,
1338         ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE  = 0x68,
1339
1340         ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
1341
1342         ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST   = 0x70,
1343         ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
1344         ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST  = 0x72,
1345         ARMV7_PERFCTR_FP_EXECUTED_INST          = 0x73,
1346         ARMV7_PERFCTR_NEON_EXECUTED_INST        = 0x74,
1347
1348         ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
1349         ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES  = 0x81,
1350         ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES        = 0x82,
1351         ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES        = 0x83,
1352         ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES  = 0x84,
1353         ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES  = 0x85,
1354         ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES      = 0x86,
1355
1356         ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES  = 0x8A,
1357         ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
1358
1359         ARMV7_PERFCTR_ISB_INST                  = 0x90,
1360         ARMV7_PERFCTR_DSB_INST                  = 0x91,
1361         ARMV7_PERFCTR_DMB_INST                  = 0x92,
1362         ARMV7_PERFCTR_EXT_INTERRUPTS            = 0x93,
1363
1364         ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED     = 0xA0,
1365         ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED       = 0xA1,
1366         ARMV7_PERFCTR_PLE_FIFO_FLUSH            = 0xA2,
1367         ARMV7_PERFCTR_PLE_RQST_COMPLETED        = 0xA3,
1368         ARMV7_PERFCTR_PLE_FIFO_OVERFLOW         = 0xA4,
1369         ARMV7_PERFCTR_PLE_RQST_PROG             = 0xA5
1370 };
1371
1372 /*
1373  * Cortex-A8 HW events mapping
1374  *
1375  * The hardware events that we support. We do support cache operations but
1376  * we have harvard caches and no way to combine instruction and data
1377  * accesses/misses in hardware.
1378  */
1379 static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
1380         [PERF_COUNT_HW_CPU_CYCLES]          = ARMV7_PERFCTR_CPU_CYCLES,
1381         [PERF_COUNT_HW_INSTRUCTIONS]        = ARMV7_PERFCTR_INSTR_EXECUTED,
1382         [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
1383         [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
1384         [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
1385         [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
1386         [PERF_COUNT_HW_BUS_CYCLES]          = ARMV7_PERFCTR_CLOCK_CYCLES,
1387 };
1388
1389 static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
1390                                           [PERF_COUNT_HW_CACHE_OP_MAX]
1391                                           [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1392         [C(L1D)] = {
1393                 /*
1394                  * The performance counters don't differentiate between read
1395                  * and write accesses/misses so this isn't strictly correct,
1396                  * but it's the best we can do. Writes and reads get
1397                  * combined.
1398                  */
1399                 [C(OP_READ)] = {
1400                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_DCACHE_ACCESS,
1401                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_DCACHE_REFILL,
1402                 },
1403                 [C(OP_WRITE)] = {
1404                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_DCACHE_ACCESS,
1405                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_DCACHE_REFILL,
1406                 },
1407                 [C(OP_PREFETCH)] = {
1408                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1409                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1410                 },
1411         },
1412         [C(L1I)] = {
1413                 [C(OP_READ)] = {
1414                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_INST,
1415                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_INST_MISS,
1416                 },
1417                 [C(OP_WRITE)] = {
1418                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L1_INST,
1419                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_L1_INST_MISS,
1420                 },
1421                 [C(OP_PREFETCH)] = {
1422                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1423                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1424                 },
1425         },
1426         [C(LL)] = {
1427                 [C(OP_READ)] = {
1428                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L2_ACCESS,
1429                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_L2_CACH_MISS,
1430                 },
1431                 [C(OP_WRITE)] = {
1432                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_L2_ACCESS,
1433                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_L2_CACH_MISS,
1434                 },
1435                 [C(OP_PREFETCH)] = {
1436                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1437                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1438                 },
1439         },
1440         [C(DTLB)] = {
1441                 /*
1442                  * Only ITLB misses and DTLB refills are supported.
1443                  * If users want the DTLB refills misses a raw counter
1444                  * must be used.
1445                  */
1446                 [C(OP_READ)] = {
1447                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1448                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_DTLB_REFILL,
1449                 },
1450                 [C(OP_WRITE)] = {
1451                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1452                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_DTLB_REFILL,
1453                 },
1454                 [C(OP_PREFETCH)] = {
1455                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1456                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1457                 },
1458         },
1459         [C(ITLB)] = {
1460                 [C(OP_READ)] = {
1461                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1462                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
1463                 },
1464                 [C(OP_WRITE)] = {
1465                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1466                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
1467                 },
1468                 [C(OP_PREFETCH)] = {
1469                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1470                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1471                 },
1472         },
1473         [C(BPU)] = {
1474                 [C(OP_READ)] = {
1475                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_WRITE,
1476                         [C(RESULT_MISS)]
1477                                         = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
1478                 },
1479                 [C(OP_WRITE)] = {
1480                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_WRITE,
1481                         [C(RESULT_MISS)]
1482                                         = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
1483                 },
1484                 [C(OP_PREFETCH)] = {
1485                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1486                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1487                 },
1488         },
1489 };
1490
1491 /*
1492  * Cortex-A9 HW events mapping
1493  */
1494 static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
1495         [PERF_COUNT_HW_CPU_CYCLES]          = ARMV7_PERFCTR_CPU_CYCLES,
1496         [PERF_COUNT_HW_INSTRUCTIONS]        =
1497                                         ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
1498         [PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_COHERENT_LINE_HIT,
1499         [PERF_COUNT_HW_CACHE_MISSES]        = ARMV7_PERFCTR_COHERENT_LINE_MISS,
1500         [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
1501         [PERF_COUNT_HW_BRANCH_MISSES]       = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
1502         [PERF_COUNT_HW_BUS_CYCLES]          = ARMV7_PERFCTR_CLOCK_CYCLES,
1503 };
1504
1505 static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
1506                                           [PERF_COUNT_HW_CACHE_OP_MAX]
1507                                           [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
1508         [C(L1D)] = {
1509                 /*
1510                  * The performance counters don't differentiate between read
1511                  * and write accesses/misses so this isn't strictly correct,
1512                  * but it's the best we can do. Writes and reads get
1513                  * combined.
1514                  */
1515                 [C(OP_READ)] = {
1516                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_DCACHE_ACCESS,
1517                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_DCACHE_REFILL,
1518                 },
1519                 [C(OP_WRITE)] = {
1520                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_DCACHE_ACCESS,
1521                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_DCACHE_REFILL,
1522                 },
1523                 [C(OP_PREFETCH)] = {
1524                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1525                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1526                 },
1527         },
1528         [C(L1I)] = {
1529                 [C(OP_READ)] = {
1530                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1531                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_IFETCH_MISS,
1532                 },
1533                 [C(OP_WRITE)] = {
1534                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1535                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_IFETCH_MISS,
1536                 },
1537                 [C(OP_PREFETCH)] = {
1538                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1539                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1540                 },
1541         },
1542         [C(LL)] = {
1543                 [C(OP_READ)] = {
1544                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1545                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1546                 },
1547                 [C(OP_WRITE)] = {
1548                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1549                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1550                 },
1551                 [C(OP_PREFETCH)] = {
1552                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1553                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1554                 },
1555         },
1556         [C(DTLB)] = {
1557                 /*
1558                  * Only ITLB misses and DTLB refills are supported.
1559                  * If users want the DTLB refills misses a raw counter
1560                  * must be used.
1561                  */
1562                 [C(OP_READ)] = {
1563                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1564                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_DTLB_REFILL,
1565                 },
1566                 [C(OP_WRITE)] = {
1567                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1568                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_DTLB_REFILL,
1569                 },
1570                 [C(OP_PREFETCH)] = {
1571                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1572                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1573                 },
1574         },
1575         [C(ITLB)] = {
1576                 [C(OP_READ)] = {
1577                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1578                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
1579                 },
1580                 [C(OP_WRITE)] = {
1581                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1582                         [C(RESULT_MISS)]        = ARMV7_PERFCTR_ITLB_MISS,
1583                 },
1584                 [C(OP_PREFETCH)] = {
1585                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1586                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1587                 },
1588         },
1589         [C(BPU)] = {
1590                 [C(OP_READ)] = {
1591                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_WRITE,
1592                         [C(RESULT_MISS)]
1593                                         = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
1594                 },
1595                 [C(OP_WRITE)] = {
1596                         [C(RESULT_ACCESS)]      = ARMV7_PERFCTR_PC_WRITE,
1597                         [C(RESULT_MISS)]
1598                                         = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
1599                 },
1600                 [C(OP_PREFETCH)] = {
1601                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
1602                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
1603                 },
1604         },
1605 };
1606
1607 /*
1608  * Perf Events counters
1609  */
1610 enum armv7_counters {
1611         ARMV7_CYCLE_COUNTER             = 1,    /* Cycle counter */
1612         ARMV7_COUNTER0                  = 2,    /* First event counter */
1613 };
1614
1615 /*
1616  * The cycle counter is ARMV7_CYCLE_COUNTER.
1617  * The first event counter is ARMV7_COUNTER0.
1618  * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
1619  */
1620 #define ARMV7_COUNTER_LAST      (ARMV7_COUNTER0 + armpmu->num_events - 1)
1621
1622 /*
1623  * ARMv7 low level PMNC access
1624  */
1625
1626 /*
1627  * Per-CPU PMNC: config reg
1628  */
1629 #define ARMV7_PMNC_E            (1 << 0) /* Enable all counters */
1630 #define ARMV7_PMNC_P            (1 << 1) /* Reset all counters */
1631 #define ARMV7_PMNC_C            (1 << 2) /* Cycle counter reset */
1632 #define ARMV7_PMNC_D            (1 << 3) /* CCNT counts every 64th cpu cycle */
1633 #define ARMV7_PMNC_X            (1 << 4) /* Export to ETM */
1634 #define ARMV7_PMNC_DP           (1 << 5) /* Disable CCNT if non-invasive debug*/
1635 #define ARMV7_PMNC_N_SHIFT      11       /* Number of counters supported */
1636 #define ARMV7_PMNC_N_MASK       0x1f
1637 #define ARMV7_PMNC_MASK         0x3f     /* Mask for writable bits */
1638
1639 /*
1640  * Available counters
1641  */
1642 #define ARMV7_CNT0              0       /* First event counter */
1643 #define ARMV7_CCNT              31      /* Cycle counter */
1644
1645 /* Perf Event to low level counters mapping */
1646 #define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
1647
1648 /*
1649  * CNTENS: counters enable reg
1650  */
1651 #define ARMV7_CNTENS_P(idx)     (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
1652 #define ARMV7_CNTENS_C          (1 << ARMV7_CCNT)
1653
1654 /*
1655  * CNTENC: counters disable reg
1656  */
1657 #define ARMV7_CNTENC_P(idx)     (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
1658 #define ARMV7_CNTENC_C          (1 << ARMV7_CCNT)
1659
1660 /*
1661  * INTENS: counters overflow interrupt enable reg
1662  */
1663 #define ARMV7_INTENS_P(idx)     (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
1664 #define ARMV7_INTENS_C          (1 << ARMV7_CCNT)
1665
1666 /*
1667  * INTENC: counters overflow interrupt disable reg
1668  */
1669 #define ARMV7_INTENC_P(idx)     (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
1670 #define ARMV7_INTENC_C          (1 << ARMV7_CCNT)
1671
1672 /*
1673  * EVTSEL: Event selection reg
1674  */
1675 #define ARMV7_EVTSEL_MASK       0xff            /* Mask for writable bits */
1676
1677 /*
1678  * SELECT: Counter selection reg
1679  */
1680 #define ARMV7_SELECT_MASK       0x1f            /* Mask for writable bits */
1681
1682 /*
1683  * FLAG: counters overflow flag status reg
1684  */
1685 #define ARMV7_FLAG_P(idx)       (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
1686 #define ARMV7_FLAG_C            (1 << ARMV7_CCNT)
1687 #define ARMV7_FLAG_MASK         0xffffffff      /* Mask for writable bits */
1688 #define ARMV7_OVERFLOWED_MASK   ARMV7_FLAG_MASK
1689
1690 static inline unsigned long armv7_pmnc_read(void)
1691 {
1692         u32 val;
1693         asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
1694         return val;
1695 }
1696
1697 static inline void armv7_pmnc_write(unsigned long val)
1698 {
1699         val &= ARMV7_PMNC_MASK;
1700         asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
1701 }
1702
1703 static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
1704 {
1705         return pmnc & ARMV7_OVERFLOWED_MASK;
1706 }
1707
1708 static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
1709                                         enum armv7_counters counter)
1710 {
1711         int ret;
1712
1713         if (counter == ARMV7_CYCLE_COUNTER)
1714                 ret = pmnc & ARMV7_FLAG_C;
1715         else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
1716                 ret = pmnc & ARMV7_FLAG_P(counter);
1717         else
1718                 pr_err("CPU%u checking wrong counter %d overflow status\n",
1719                         smp_processor_id(), counter);
1720
1721         return ret;
1722 }
1723
1724 static inline int armv7_pmnc_select_counter(unsigned int idx)
1725 {
1726         u32 val;
1727
1728         if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
1729                 pr_err("CPU%u selecting wrong PMNC counter"
1730                         " %d\n", smp_processor_id(), idx);
1731                 return -1;
1732         }
1733
1734         val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
1735         asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
1736
1737         return idx;
1738 }
1739
1740 static inline u32 armv7pmu_read_counter(int idx)
1741 {
1742         unsigned long value = 0;
1743
1744         if (idx == ARMV7_CYCLE_COUNTER)
1745                 asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
1746         else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
1747                 if (armv7_pmnc_select_counter(idx) == idx)
1748                         asm volatile("mrc p15, 0, %0, c9, c13, 2"
1749                                      : "=r" (value));
1750         } else
1751                 pr_err("CPU%u reading wrong counter %d\n",
1752                         smp_processor_id(), idx);
1753
1754         return value;
1755 }
1756
1757 static inline void armv7pmu_write_counter(int idx, u32 value)
1758 {
1759         if (idx == ARMV7_CYCLE_COUNTER)
1760                 asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
1761         else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
1762                 if (armv7_pmnc_select_counter(idx) == idx)
1763                         asm volatile("mcr p15, 0, %0, c9, c13, 2"
1764                                      : : "r" (value));
1765         } else
1766                 pr_err("CPU%u writing wrong counter %d\n",
1767                         smp_processor_id(), idx);
1768 }
1769
1770 static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
1771 {
1772         if (armv7_pmnc_select_counter(idx) == idx) {
1773                 val &= ARMV7_EVTSEL_MASK;
1774                 asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
1775         }
1776 }
1777
1778 static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
1779 {
1780         u32 val;
1781
1782         if ((idx != ARMV7_CYCLE_COUNTER) &&
1783             ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
1784                 pr_err("CPU%u enabling wrong PMNC counter"
1785                         " %d\n", smp_processor_id(), idx);
1786                 return -1;
1787         }
1788
1789         if (idx == ARMV7_CYCLE_COUNTER)
1790                 val = ARMV7_CNTENS_C;
1791         else
1792                 val = ARMV7_CNTENS_P(idx);
1793
1794         asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
1795
1796         return idx;
1797 }
1798
1799 static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
1800 {
1801         u32 val;
1802
1803
1804         if ((idx != ARMV7_CYCLE_COUNTER) &&
1805             ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
1806                 pr_err("CPU%u disabling wrong PMNC counter"
1807                         " %d\n", smp_processor_id(), idx);
1808                 return -1;
1809         }
1810
1811         if (idx == ARMV7_CYCLE_COUNTER)
1812                 val = ARMV7_CNTENC_C;
1813         else
1814                 val = ARMV7_CNTENC_P(idx);
1815
1816         asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
1817
1818         return idx;
1819 }
1820
1821 static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
1822 {
1823         u32 val;
1824
1825         if ((idx != ARMV7_CYCLE_COUNTER) &&
1826             ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
1827                 pr_err("CPU%u enabling wrong PMNC counter"
1828                         " interrupt enable %d\n", smp_processor_id(), idx);
1829                 return -1;
1830         }
1831
1832         if (idx == ARMV7_CYCLE_COUNTER)
1833                 val = ARMV7_INTENS_C;
1834         else
1835                 val = ARMV7_INTENS_P(idx);
1836
1837         asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
1838
1839         return idx;
1840 }
1841
1842 static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
1843 {
1844         u32 val;
1845
1846         if ((idx != ARMV7_CYCLE_COUNTER) &&
1847             ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
1848                 pr_err("CPU%u disabling wrong PMNC counter"
1849                         " interrupt enable %d\n", smp_processor_id(), idx);
1850                 return -1;
1851         }
1852
1853         if (idx == ARMV7_CYCLE_COUNTER)
1854                 val = ARMV7_INTENC_C;
1855         else
1856                 val = ARMV7_INTENC_P(idx);
1857
1858         asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
1859
1860         return idx;
1861 }
1862
1863 static inline u32 armv7_pmnc_getreset_flags(void)
1864 {
1865         u32 val;
1866
1867         /* Read */
1868         asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
1869
1870         /* Write to clear flags */
1871         val &= ARMV7_FLAG_MASK;
1872         asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
1873
1874         return val;
1875 }
1876
1877 #ifdef DEBUG
1878 static void armv7_pmnc_dump_regs(void)
1879 {
1880         u32 val;
1881         unsigned int cnt;
1882
1883         printk(KERN_INFO "PMNC registers dump:\n");
1884
1885         asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
1886         printk(KERN_INFO "PMNC  =0x%08x\n", val);
1887
1888         asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
1889         printk(KERN_INFO "CNTENS=0x%08x\n", val);
1890
1891         asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
1892         printk(KERN_INFO "INTENS=0x%08x\n", val);
1893
1894         asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
1895         printk(KERN_INFO "FLAGS =0x%08x\n", val);
1896
1897         asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
1898         printk(KERN_INFO "SELECT=0x%08x\n", val);
1899
1900         asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
1901         printk(KERN_INFO "CCNT  =0x%08x\n", val);
1902
1903         for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
1904                 armv7_pmnc_select_counter(cnt);
1905                 asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
1906                 printk(KERN_INFO "CNT[%d] count =0x%08x\n",
1907                         cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
1908                 asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
1909                 printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
1910                         cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
1911         }
1912 }
1913 #endif
1914
1915 void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
1916 {
1917         unsigned long flags;
1918
1919         /*
1920          * Enable counter and interrupt, and set the counter to count
1921          * the event that we're interested in.
1922          */
1923         spin_lock_irqsave(&pmu_lock, flags);
1924
1925         /*
1926          * Disable counter
1927          */
1928         armv7_pmnc_disable_counter(idx);
1929
1930         /*
1931          * Set event (if destined for PMNx counters)
1932          * We don't need to set the event if it's a cycle count
1933          */
1934         if (idx != ARMV7_CYCLE_COUNTER)
1935                 armv7_pmnc_write_evtsel(idx, hwc->config_base);
1936
1937         /*
1938          * Enable interrupt for this counter
1939          */
1940         armv7_pmnc_enable_intens(idx);
1941
1942         /*
1943          * Enable counter
1944          */
1945         armv7_pmnc_enable_counter(idx);
1946
1947         spin_unlock_irqrestore(&pmu_lock, flags);
1948 }
1949
1950 static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
1951 {
1952         unsigned long flags;
1953
1954         /*
1955          * Disable counter and interrupt
1956          */
1957         spin_lock_irqsave(&pmu_lock, flags);
1958
1959         /*
1960          * Disable counter
1961          */
1962         armv7_pmnc_disable_counter(idx);
1963
1964         /*
1965          * Disable interrupt for this counter
1966          */
1967         armv7_pmnc_disable_intens(idx);
1968
1969         spin_unlock_irqrestore(&pmu_lock, flags);
1970 }
1971
1972 static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
1973 {
1974         unsigned long pmnc;
1975         struct perf_sample_data data;
1976         struct cpu_hw_events *cpuc;
1977         struct pt_regs *regs;
1978         int idx;
1979
1980         /*
1981          * Get and reset the IRQ flags
1982          */
1983         pmnc = armv7_pmnc_getreset_flags();
1984
1985         /*
1986          * Did an overflow occur?
1987          */
1988         if (!armv7_pmnc_has_overflowed(pmnc))
1989                 return IRQ_NONE;
1990
1991         /*
1992          * Handle the counter(s) overflow(s)
1993          */
1994         regs = get_irq_regs();
1995
1996         perf_sample_data_init(&data, 0);
1997
1998         cpuc = &__get_cpu_var(cpu_hw_events);
1999         for (idx = 0; idx <= armpmu->num_events; ++idx) {
2000                 struct perf_event *event = cpuc->events[idx];
2001                 struct hw_perf_event *hwc;
2002
2003                 if (!test_bit(idx, cpuc->active_mask))
2004                         continue;
2005
2006                 /*
2007                  * We have a single interrupt for all counters. Check that
2008                  * each counter has overflowed before we process it.
2009                  */
2010                 if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
2011                         continue;
2012
2013                 hwc = &event->hw;
2014                 armpmu_event_update(event, hwc, idx);
2015                 data.period = event->hw.last_period;
2016                 if (!armpmu_event_set_period(event, hwc, idx))
2017                         continue;
2018
2019                 if (perf_event_overflow(event, 0, &data, regs))
2020                         armpmu->disable(hwc, idx);
2021         }
2022
2023         /*
2024          * Handle the pending perf events.
2025          *
2026          * Note: this call *must* be run with interrupts disabled. For
2027          * platforms that can have the PMU interrupts raised as an NMI, this
2028          * will not work.
2029          */
2030         perf_event_do_pending();
2031
2032         return IRQ_HANDLED;
2033 }
2034
2035 static void armv7pmu_start(void)
2036 {
2037         unsigned long flags;
2038
2039         spin_lock_irqsave(&pmu_lock, flags);
2040         /* Enable all counters */
2041         armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
2042         spin_unlock_irqrestore(&pmu_lock, flags);
2043 }
2044
2045 static void armv7pmu_stop(void)
2046 {
2047         unsigned long flags;
2048
2049         spin_lock_irqsave(&pmu_lock, flags);
2050         /* Disable all counters */
2051         armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
2052         spin_unlock_irqrestore(&pmu_lock, flags);
2053 }
2054
2055 static inline int armv7_a8_pmu_event_map(int config)
2056 {
2057         int mapping = armv7_a8_perf_map[config];
2058         if (HW_OP_UNSUPPORTED == mapping)
2059                 mapping = -EOPNOTSUPP;
2060         return mapping;
2061 }
2062
2063 static inline int armv7_a9_pmu_event_map(int config)
2064 {
2065         int mapping = armv7_a9_perf_map[config];
2066         if (HW_OP_UNSUPPORTED == mapping)
2067                 mapping = -EOPNOTSUPP;
2068         return mapping;
2069 }
2070
2071 static u64 armv7pmu_raw_event(u64 config)
2072 {
2073         return config & 0xff;
2074 }
2075
2076 static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
2077                                   struct hw_perf_event *event)
2078 {
2079         int idx;
2080
2081         /* Always place a cycle counter into the cycle counter. */
2082         if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
2083                 if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
2084                         return -EAGAIN;
2085
2086                 return ARMV7_CYCLE_COUNTER;
2087         } else {
2088                 /*
2089                  * For anything other than a cycle counter, try and use
2090                  * the events counters
2091                  */
2092                 for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
2093                         if (!test_and_set_bit(idx, cpuc->used_mask))
2094                                 return idx;
2095                 }
2096
2097                 /* The counters are all in use. */
2098                 return -EAGAIN;
2099         }
2100 }
2101
2102 static struct arm_pmu armv7pmu = {
2103         .handle_irq             = armv7pmu_handle_irq,
2104         .enable                 = armv7pmu_enable_event,
2105         .disable                = armv7pmu_disable_event,
2106         .raw_event              = armv7pmu_raw_event,
2107         .read_counter           = armv7pmu_read_counter,
2108         .write_counter          = armv7pmu_write_counter,
2109         .get_event_idx          = armv7pmu_get_event_idx,
2110         .start                  = armv7pmu_start,
2111         .stop                   = armv7pmu_stop,
2112         .max_period             = (1LLU << 32) - 1,
2113 };
2114
2115 static u32 __init armv7_reset_read_pmnc(void)
2116 {
2117         u32 nb_cnt;
2118
2119         /* Initialize & Reset PMNC: C and P bits */
2120         armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
2121
2122         /* Read the nb of CNTx counters supported from PMNC */
2123         nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
2124
2125         /* Add the CPU cycles counter and return */
2126         return nb_cnt + 1;
2127 }
2128
2129 /*
2130  * ARMv5 [xscale] Performance counter handling code.
2131  *
2132  * Based on xscale OProfile code.
2133  *
2134  * There are two variants of the xscale PMU that we support:
2135  *      - xscale1pmu: 2 event counters and a cycle counter
2136  *      - xscale2pmu: 4 event counters and a cycle counter
2137  * The two variants share event definitions, but have different
2138  * PMU structures.
2139  */
2140
2141 enum xscale_perf_types {
2142         XSCALE_PERFCTR_ICACHE_MISS              = 0x00,
2143         XSCALE_PERFCTR_ICACHE_NO_DELIVER        = 0x01,
2144         XSCALE_PERFCTR_DATA_STALL               = 0x02,
2145         XSCALE_PERFCTR_ITLB_MISS                = 0x03,
2146         XSCALE_PERFCTR_DTLB_MISS                = 0x04,
2147         XSCALE_PERFCTR_BRANCH                   = 0x05,
2148         XSCALE_PERFCTR_BRANCH_MISS              = 0x06,
2149         XSCALE_PERFCTR_INSTRUCTION              = 0x07,
2150         XSCALE_PERFCTR_DCACHE_FULL_STALL        = 0x08,
2151         XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09,
2152         XSCALE_PERFCTR_DCACHE_ACCESS            = 0x0A,
2153         XSCALE_PERFCTR_DCACHE_MISS              = 0x0B,
2154         XSCALE_PERFCTR_DCACHE_WRITE_BACK        = 0x0C,
2155         XSCALE_PERFCTR_PC_CHANGED               = 0x0D,
2156         XSCALE_PERFCTR_BCU_REQUEST              = 0x10,
2157         XSCALE_PERFCTR_BCU_FULL                 = 0x11,
2158         XSCALE_PERFCTR_BCU_DRAIN                = 0x12,
2159         XSCALE_PERFCTR_BCU_ECC_NO_ELOG          = 0x14,
2160         XSCALE_PERFCTR_BCU_1_BIT_ERR            = 0x15,
2161         XSCALE_PERFCTR_RMW                      = 0x16,
2162         /* XSCALE_PERFCTR_CCNT is not hardware defined */
2163         XSCALE_PERFCTR_CCNT                     = 0xFE,
2164         XSCALE_PERFCTR_UNUSED                   = 0xFF,
2165 };
2166
2167 enum xscale_counters {
2168         XSCALE_CYCLE_COUNTER    = 1,
2169         XSCALE_COUNTER0,
2170         XSCALE_COUNTER1,
2171         XSCALE_COUNTER2,
2172         XSCALE_COUNTER3,
2173 };
2174
2175 static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
2176         [PERF_COUNT_HW_CPU_CYCLES]          = XSCALE_PERFCTR_CCNT,
2177         [PERF_COUNT_HW_INSTRUCTIONS]        = XSCALE_PERFCTR_INSTRUCTION,
2178         [PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
2179         [PERF_COUNT_HW_CACHE_MISSES]        = HW_OP_UNSUPPORTED,
2180         [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
2181         [PERF_COUNT_HW_BRANCH_MISSES]       = XSCALE_PERFCTR_BRANCH_MISS,
2182         [PERF_COUNT_HW_BUS_CYCLES]          = HW_OP_UNSUPPORTED,
2183 };
2184
2185 static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
2186                                            [PERF_COUNT_HW_CACHE_OP_MAX]
2187                                            [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
2188         [C(L1D)] = {
2189                 [C(OP_READ)] = {
2190                         [C(RESULT_ACCESS)]      = XSCALE_PERFCTR_DCACHE_ACCESS,
2191                         [C(RESULT_MISS)]        = XSCALE_PERFCTR_DCACHE_MISS,
2192                 },
2193                 [C(OP_WRITE)] = {
2194                         [C(RESULT_ACCESS)]      = XSCALE_PERFCTR_DCACHE_ACCESS,
2195                         [C(RESULT_MISS)]        = XSCALE_PERFCTR_DCACHE_MISS,
2196                 },
2197                 [C(OP_PREFETCH)] = {
2198                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2199                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
2200                 },
2201         },
2202         [C(L1I)] = {
2203                 [C(OP_READ)] = {
2204                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2205                         [C(RESULT_MISS)]        = XSCALE_PERFCTR_ICACHE_MISS,
2206                 },
2207                 [C(OP_WRITE)] = {
2208                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2209                         [C(RESULT_MISS)]        = XSCALE_PERFCTR_ICACHE_MISS,
2210                 },
2211                 [C(OP_PREFETCH)] = {
2212                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2213                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
2214                 },
2215         },
2216         [C(LL)] = {
2217                 [C(OP_READ)] = {
2218                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2219                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
2220                 },
2221                 [C(OP_WRITE)] = {
2222                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2223                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
2224                 },
2225                 [C(OP_PREFETCH)] = {
2226                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2227                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
2228                 },
2229         },
2230         [C(DTLB)] = {
2231                 [C(OP_READ)] = {
2232                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2233                         [C(RESULT_MISS)]        = XSCALE_PERFCTR_DTLB_MISS,
2234                 },
2235                 [C(OP_WRITE)] = {
2236                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2237                         [C(RESULT_MISS)]        = XSCALE_PERFCTR_DTLB_MISS,
2238                 },
2239                 [C(OP_PREFETCH)] = {
2240                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2241                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
2242                 },
2243         },
2244         [C(ITLB)] = {
2245                 [C(OP_READ)] = {
2246                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2247                         [C(RESULT_MISS)]        = XSCALE_PERFCTR_ITLB_MISS,
2248                 },
2249                 [C(OP_WRITE)] = {
2250                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2251                         [C(RESULT_MISS)]        = XSCALE_PERFCTR_ITLB_MISS,
2252                 },
2253                 [C(OP_PREFETCH)] = {
2254                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2255                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
2256                 },
2257         },
2258         [C(BPU)] = {
2259                 [C(OP_READ)] = {
2260                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2261                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
2262                 },
2263                 [C(OP_WRITE)] = {
2264                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2265                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
2266                 },
2267                 [C(OP_PREFETCH)] = {
2268                         [C(RESULT_ACCESS)]      = CACHE_OP_UNSUPPORTED,
2269                         [C(RESULT_MISS)]        = CACHE_OP_UNSUPPORTED,
2270                 },
2271         },
2272 };
2273
2274 #define XSCALE_PMU_ENABLE       0x001
2275 #define XSCALE_PMN_RESET        0x002
2276 #define XSCALE_CCNT_RESET       0x004
2277 #define XSCALE_PMU_RESET        (CCNT_RESET | PMN_RESET)
2278 #define XSCALE_PMU_CNT64        0x008
2279
2280 static inline int
2281 xscalepmu_event_map(int config)
2282 {
2283         int mapping = xscale_perf_map[config];
2284         if (HW_OP_UNSUPPORTED == mapping)
2285                 mapping = -EOPNOTSUPP;
2286         return mapping;
2287 }
2288
2289 static u64
2290 xscalepmu_raw_event(u64 config)
2291 {
2292         return config & 0xff;
2293 }
2294
2295 #define XSCALE1_OVERFLOWED_MASK 0x700
2296 #define XSCALE1_CCOUNT_OVERFLOW 0x400
2297 #define XSCALE1_COUNT0_OVERFLOW 0x100
2298 #define XSCALE1_COUNT1_OVERFLOW 0x200
2299 #define XSCALE1_CCOUNT_INT_EN   0x040
2300 #define XSCALE1_COUNT0_INT_EN   0x010
2301 #define XSCALE1_COUNT1_INT_EN   0x020
2302 #define XSCALE1_COUNT0_EVT_SHFT 12
2303 #define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT)
2304 #define XSCALE1_COUNT1_EVT_SHFT 20
2305 #define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT)
2306
2307 static inline u32
2308 xscale1pmu_read_pmnc(void)
2309 {
2310         u32 val;
2311         asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
2312         return val;
2313 }
2314
2315 static inline void
2316 xscale1pmu_write_pmnc(u32 val)
2317 {
2318         /* upper 4bits and 7, 11 are write-as-0 */
2319         val &= 0xffff77f;
2320         asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
2321 }
2322
2323 static inline int
2324 xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
2325                                         enum xscale_counters counter)
2326 {
2327         int ret = 0;
2328
2329         switch (counter) {
2330         case XSCALE_CYCLE_COUNTER:
2331                 ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
2332                 break;
2333         case XSCALE_COUNTER0:
2334                 ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
2335                 break;
2336         case XSCALE_COUNTER1:
2337                 ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
2338                 break;
2339         default:
2340                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
2341         }
2342
2343         return ret;
2344 }
2345
2346 static irqreturn_t
2347 xscale1pmu_handle_irq(int irq_num, void *dev)
2348 {
2349         unsigned long pmnc;
2350         struct perf_sample_data data;
2351         struct cpu_hw_events *cpuc;
2352         struct pt_regs *regs;
2353         int idx;
2354
2355         /*
2356          * NOTE: there's an A stepping erratum that states if an overflow
2357          *       bit already exists and another occurs, the previous
2358          *       Overflow bit gets cleared. There's no workaround.
2359          *       Fixed in B stepping or later.
2360          */
2361         pmnc = xscale1pmu_read_pmnc();
2362
2363         /*
2364          * Write the value back to clear the overflow flags. Overflow
2365          * flags remain in pmnc for use below. We also disable the PMU
2366          * while we process the interrupt.
2367          */
2368         xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
2369
2370         if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
2371                 return IRQ_NONE;
2372
2373         regs = get_irq_regs();
2374
2375         perf_sample_data_init(&data, 0);
2376
2377         cpuc = &__get_cpu_var(cpu_hw_events);
2378         for (idx = 0; idx <= armpmu->num_events; ++idx) {
2379                 struct perf_event *event = cpuc->events[idx];
2380                 struct hw_perf_event *hwc;
2381
2382                 if (!test_bit(idx, cpuc->active_mask))
2383                         continue;
2384
2385                 if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
2386                         continue;
2387
2388                 hwc = &event->hw;
2389                 armpmu_event_update(event, hwc, idx);
2390                 data.period = event->hw.last_period;
2391                 if (!armpmu_event_set_period(event, hwc, idx))
2392                         continue;
2393
2394                 if (perf_event_overflow(event, 0, &data, regs))
2395                         armpmu->disable(hwc, idx);
2396         }
2397
2398         perf_event_do_pending();
2399
2400         /*
2401          * Re-enable the PMU.
2402          */
2403         pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
2404         xscale1pmu_write_pmnc(pmnc);
2405
2406         return IRQ_HANDLED;
2407 }
2408
2409 static void
2410 xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
2411 {
2412         unsigned long val, mask, evt, flags;
2413
2414         switch (idx) {
2415         case XSCALE_CYCLE_COUNTER:
2416                 mask = 0;
2417                 evt = XSCALE1_CCOUNT_INT_EN;
2418                 break;
2419         case XSCALE_COUNTER0:
2420                 mask = XSCALE1_COUNT0_EVT_MASK;
2421                 evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
2422                         XSCALE1_COUNT0_INT_EN;
2423                 break;
2424         case XSCALE_COUNTER1:
2425                 mask = XSCALE1_COUNT1_EVT_MASK;
2426                 evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
2427                         XSCALE1_COUNT1_INT_EN;
2428                 break;
2429         default:
2430                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
2431                 return;
2432         }
2433
2434         spin_lock_irqsave(&pmu_lock, flags);
2435         val = xscale1pmu_read_pmnc();
2436         val &= ~mask;
2437         val |= evt;
2438         xscale1pmu_write_pmnc(val);
2439         spin_unlock_irqrestore(&pmu_lock, flags);
2440 }
2441
2442 static void
2443 xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
2444 {
2445         unsigned long val, mask, evt, flags;
2446
2447         switch (idx) {
2448         case XSCALE_CYCLE_COUNTER:
2449                 mask = XSCALE1_CCOUNT_INT_EN;
2450                 evt = 0;
2451                 break;
2452         case XSCALE_COUNTER0:
2453                 mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
2454                 evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
2455                 break;
2456         case XSCALE_COUNTER1:
2457                 mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
2458                 evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
2459                 break;
2460         default:
2461                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
2462                 return;
2463         }
2464
2465         spin_lock_irqsave(&pmu_lock, flags);
2466         val = xscale1pmu_read_pmnc();
2467         val &= ~mask;
2468         val |= evt;
2469         xscale1pmu_write_pmnc(val);
2470         spin_unlock_irqrestore(&pmu_lock, flags);
2471 }
2472
2473 static int
2474 xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
2475                         struct hw_perf_event *event)
2476 {
2477         if (XSCALE_PERFCTR_CCNT == event->config_base) {
2478                 if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
2479                         return -EAGAIN;
2480
2481                 return XSCALE_CYCLE_COUNTER;
2482         } else {
2483                 if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) {
2484                         return XSCALE_COUNTER1;
2485                 }
2486
2487                 if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) {
2488                         return XSCALE_COUNTER0;
2489                 }
2490
2491                 return -EAGAIN;
2492         }
2493 }
2494
2495 static void
2496 xscale1pmu_start(void)
2497 {
2498         unsigned long flags, val;
2499
2500         spin_lock_irqsave(&pmu_lock, flags);
2501         val = xscale1pmu_read_pmnc();
2502         val |= XSCALE_PMU_ENABLE;
2503         xscale1pmu_write_pmnc(val);
2504         spin_unlock_irqrestore(&pmu_lock, flags);
2505 }
2506
2507 static void
2508 xscale1pmu_stop(void)
2509 {
2510         unsigned long flags, val;
2511
2512         spin_lock_irqsave(&pmu_lock, flags);
2513         val = xscale1pmu_read_pmnc();
2514         val &= ~XSCALE_PMU_ENABLE;
2515         xscale1pmu_write_pmnc(val);
2516         spin_unlock_irqrestore(&pmu_lock, flags);
2517 }
2518
2519 static inline u32
2520 xscale1pmu_read_counter(int counter)
2521 {
2522         u32 val = 0;
2523
2524         switch (counter) {
2525         case XSCALE_CYCLE_COUNTER:
2526                 asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
2527                 break;
2528         case XSCALE_COUNTER0:
2529                 asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
2530                 break;
2531         case XSCALE_COUNTER1:
2532                 asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
2533                 break;
2534         }
2535
2536         return val;
2537 }
2538
2539 static inline void
2540 xscale1pmu_write_counter(int counter, u32 val)
2541 {
2542         switch (counter) {
2543         case XSCALE_CYCLE_COUNTER:
2544                 asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
2545                 break;
2546         case XSCALE_COUNTER0:
2547                 asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
2548                 break;
2549         case XSCALE_COUNTER1:
2550                 asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
2551                 break;
2552         }
2553 }
2554
2555 static const struct arm_pmu xscale1pmu = {
2556         .id             = ARM_PERF_PMU_ID_XSCALE1,
2557         .handle_irq     = xscale1pmu_handle_irq,
2558         .enable         = xscale1pmu_enable_event,
2559         .disable        = xscale1pmu_disable_event,
2560         .event_map      = xscalepmu_event_map,
2561         .raw_event      = xscalepmu_raw_event,
2562         .read_counter   = xscale1pmu_read_counter,
2563         .write_counter  = xscale1pmu_write_counter,
2564         .get_event_idx  = xscale1pmu_get_event_idx,
2565         .start          = xscale1pmu_start,
2566         .stop           = xscale1pmu_stop,
2567         .num_events     = 3,
2568         .max_period     = (1LLU << 32) - 1,
2569 };
2570
2571 #define XSCALE2_OVERFLOWED_MASK 0x01f
2572 #define XSCALE2_CCOUNT_OVERFLOW 0x001
2573 #define XSCALE2_COUNT0_OVERFLOW 0x002
2574 #define XSCALE2_COUNT1_OVERFLOW 0x004
2575 #define XSCALE2_COUNT2_OVERFLOW 0x008
2576 #define XSCALE2_COUNT3_OVERFLOW 0x010
2577 #define XSCALE2_CCOUNT_INT_EN   0x001
2578 #define XSCALE2_COUNT0_INT_EN   0x002
2579 #define XSCALE2_COUNT1_INT_EN   0x004
2580 #define XSCALE2_COUNT2_INT_EN   0x008
2581 #define XSCALE2_COUNT3_INT_EN   0x010
2582 #define XSCALE2_COUNT0_EVT_SHFT 0
2583 #define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT)
2584 #define XSCALE2_COUNT1_EVT_SHFT 8
2585 #define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT)
2586 #define XSCALE2_COUNT2_EVT_SHFT 16
2587 #define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT)
2588 #define XSCALE2_COUNT3_EVT_SHFT 24
2589 #define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT)
2590
2591 static inline u32
2592 xscale2pmu_read_pmnc(void)
2593 {
2594         u32 val;
2595         asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
2596         /* bits 1-2 and 4-23 are read-unpredictable */
2597         return val & 0xff000009;
2598 }
2599
2600 static inline void
2601 xscale2pmu_write_pmnc(u32 val)
2602 {
2603         /* bits 4-23 are write-as-0, 24-31 are write ignored */
2604         val &= 0xf;
2605         asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
2606 }
2607
2608 static inline u32
2609 xscale2pmu_read_overflow_flags(void)
2610 {
2611         u32 val;
2612         asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
2613         return val;
2614 }
2615
2616 static inline void
2617 xscale2pmu_write_overflow_flags(u32 val)
2618 {
2619         asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
2620 }
2621
2622 static inline u32
2623 xscale2pmu_read_event_select(void)
2624 {
2625         u32 val;
2626         asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
2627         return val;
2628 }
2629
2630 static inline void
2631 xscale2pmu_write_event_select(u32 val)
2632 {
2633         asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
2634 }
2635
2636 static inline u32
2637 xscale2pmu_read_int_enable(void)
2638 {
2639         u32 val;
2640         asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
2641         return val;
2642 }
2643
2644 static void
2645 xscale2pmu_write_int_enable(u32 val)
2646 {
2647         asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
2648 }
2649
2650 static inline int
2651 xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
2652                                         enum xscale_counters counter)
2653 {
2654         int ret = 0;
2655
2656         switch (counter) {
2657         case XSCALE_CYCLE_COUNTER:
2658                 ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
2659                 break;
2660         case XSCALE_COUNTER0:
2661                 ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
2662                 break;
2663         case XSCALE_COUNTER1:
2664                 ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
2665                 break;
2666         case XSCALE_COUNTER2:
2667                 ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
2668                 break;
2669         case XSCALE_COUNTER3:
2670                 ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
2671                 break;
2672         default:
2673                 WARN_ONCE(1, "invalid counter number (%d)\n", counter);
2674         }
2675
2676         return ret;
2677 }
2678
2679 static irqreturn_t
2680 xscale2pmu_handle_irq(int irq_num, void *dev)
2681 {
2682         unsigned long pmnc, of_flags;
2683         struct perf_sample_data data;
2684         struct cpu_hw_events *cpuc;
2685         struct pt_regs *regs;
2686         int idx;
2687
2688         /* Disable the PMU. */
2689         pmnc = xscale2pmu_read_pmnc();
2690         xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
2691
2692         /* Check the overflow flag register. */
2693         of_flags = xscale2pmu_read_overflow_flags();
2694         if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
2695                 return IRQ_NONE;
2696
2697         /* Clear the overflow bits. */
2698         xscale2pmu_write_overflow_flags(of_flags);
2699
2700         regs = get_irq_regs();
2701
2702         perf_sample_data_init(&data, 0);
2703
2704         cpuc = &__get_cpu_var(cpu_hw_events);
2705         for (idx = 0; idx <= armpmu->num_events; ++idx) {
2706                 struct perf_event *event = cpuc->events[idx];
2707                 struct hw_perf_event *hwc;
2708
2709                 if (!test_bit(idx, cpuc->active_mask))
2710                         continue;
2711
2712                 if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
2713                         continue;
2714
2715                 hwc = &event->hw;
2716                 armpmu_event_update(event, hwc, idx);
2717                 data.period = event->hw.last_period;
2718                 if (!armpmu_event_set_period(event, hwc, idx))
2719                         continue;
2720
2721                 if (perf_event_overflow(event, 0, &data, regs))
2722                         armpmu->disable(hwc, idx);
2723         }
2724
2725         perf_event_do_pending();
2726
2727         /*
2728          * Re-enable the PMU.
2729          */
2730         pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
2731         xscale2pmu_write_pmnc(pmnc);
2732
2733         return IRQ_HANDLED;
2734 }
2735
2736 static void
2737 xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
2738 {
2739         unsigned long flags, ien, evtsel;
2740
2741         ien = xscale2pmu_read_int_enable();
2742         evtsel = xscale2pmu_read_event_select();
2743
2744         switch (idx) {
2745         case XSCALE_CYCLE_COUNTER:
2746                 ien |= XSCALE2_CCOUNT_INT_EN;
2747                 break;
2748         case XSCALE_COUNTER0:
2749                 ien |= XSCALE2_COUNT0_INT_EN;
2750                 evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
2751                 evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
2752                 break;
2753         case XSCALE_COUNTER1:
2754                 ien |= XSCALE2_COUNT1_INT_EN;
2755                 evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
2756                 evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
2757                 break;
2758         case XSCALE_COUNTER2:
2759                 ien |= XSCALE2_COUNT2_INT_EN;
2760                 evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
2761                 evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
2762                 break;
2763         case XSCALE_COUNTER3:
2764                 ien |= XSCALE2_COUNT3_INT_EN;
2765                 evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
2766                 evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
2767                 break;
2768         default:
2769                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
2770                 return;
2771         }
2772
2773         spin_lock_irqsave(&pmu_lock, flags);
2774         xscale2pmu_write_event_select(evtsel);
2775         xscale2pmu_write_int_enable(ien);
2776         spin_unlock_irqrestore(&pmu_lock, flags);
2777 }
2778
2779 static void
2780 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
2781 {
2782         unsigned long flags, ien, evtsel;
2783
2784         ien = xscale2pmu_read_int_enable();
2785         evtsel = xscale2pmu_read_event_select();
2786
2787         switch (idx) {
2788         case XSCALE_CYCLE_COUNTER:
2789                 ien &= ~XSCALE2_CCOUNT_INT_EN;
2790                 break;
2791         case XSCALE_COUNTER0:
2792                 ien &= ~XSCALE2_COUNT0_INT_EN;
2793                 evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
2794                 evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
2795                 break;
2796         case XSCALE_COUNTER1:
2797                 ien &= ~XSCALE2_COUNT1_INT_EN;
2798                 evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
2799                 evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
2800                 break;
2801         case XSCALE_COUNTER2:
2802                 ien &= ~XSCALE2_COUNT2_INT_EN;
2803                 evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
2804                 evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
2805                 break;
2806         case XSCALE_COUNTER3:
2807                 ien &= ~XSCALE2_COUNT3_INT_EN;
2808                 evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
2809                 evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
2810                 break;
2811         default:
2812                 WARN_ONCE(1, "invalid counter number (%d)\n", idx);
2813                 return;
2814         }
2815
2816         spin_lock_irqsave(&pmu_lock, flags);
2817         xscale2pmu_write_event_select(evtsel);
2818         xscale2pmu_write_int_enable(ien);
2819         spin_unlock_irqrestore(&pmu_lock, flags);
2820 }
2821
2822 static int
2823 xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
2824                         struct hw_perf_event *event)
2825 {
2826         int idx = xscale1pmu_get_event_idx(cpuc, event);
2827         if (idx >= 0)
2828                 goto out;
2829
2830         if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
2831                 idx = XSCALE_COUNTER3;
2832         else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
2833                 idx = XSCALE_COUNTER2;
2834 out:
2835         return idx;
2836 }
2837
2838 static void
2839 xscale2pmu_start(void)
2840 {
2841         unsigned long flags, val;
2842
2843         spin_lock_irqsave(&pmu_lock, flags);
2844         val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
2845         val |= XSCALE_PMU_ENABLE;
2846         xscale2pmu_write_pmnc(val);
2847         spin_unlock_irqrestore(&pmu_lock, flags);
2848 }
2849
2850 static void
2851 xscale2pmu_stop(void)
2852 {
2853         unsigned long flags, val;
2854
2855         spin_lock_irqsave(&pmu_lock, flags);
2856         val = xscale2pmu_read_pmnc();
2857         val &= ~XSCALE_PMU_ENABLE;
2858         xscale2pmu_write_pmnc(val);
2859         spin_unlock_irqrestore(&pmu_lock, flags);
2860 }
2861
2862 static inline u32
2863 xscale2pmu_read_counter(int counter)
2864 {
2865         u32 val = 0;
2866
2867         switch (counter) {
2868         case XSCALE_CYCLE_COUNTER:
2869                 asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
2870                 break;
2871         case XSCALE_COUNTER0:
2872                 asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
2873                 break;
2874         case XSCALE_COUNTER1:
2875                 asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
2876                 break;
2877         case XSCALE_COUNTER2:
2878                 asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
2879                 break;
2880         case XSCALE_COUNTER3:
2881                 asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
2882                 break;
2883         }
2884
2885         return val;
2886 }
2887
2888 static inline void
2889 xscale2pmu_write_counter(int counter, u32 val)
2890 {
2891         switch (counter) {
2892         case XSCALE_CYCLE_COUNTER:
2893                 asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
2894                 break;
2895         case XSCALE_COUNTER0:
2896                 asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
2897                 break;
2898         case XSCALE_COUNTER1:
2899                 asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
2900                 break;
2901         case XSCALE_COUNTER2:
2902                 asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
2903                 break;
2904         case XSCALE_COUNTER3:
2905                 asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
2906                 break;
2907         }
2908 }
2909
2910 static const struct arm_pmu xscale2pmu = {
2911         .id             = ARM_PERF_PMU_ID_XSCALE2,
2912         .handle_irq     = xscale2pmu_handle_irq,
2913         .enable         = xscale2pmu_enable_event,
2914         .disable        = xscale2pmu_disable_event,
2915         .event_map      = xscalepmu_event_map,
2916         .raw_event      = xscalepmu_raw_event,
2917         .read_counter   = xscale2pmu_read_counter,
2918         .write_counter  = xscale2pmu_write_counter,
2919         .get_event_idx  = xscale2pmu_get_event_idx,
2920         .start          = xscale2pmu_start,
2921         .stop           = xscale2pmu_stop,
2922         .num_events     = 5,
2923         .max_period     = (1LLU << 32) - 1,
2924 };
2925
2926 static int __init
2927 init_hw_perf_events(void)
2928 {
2929         unsigned long cpuid = read_cpuid_id();
2930         unsigned long implementor = (cpuid & 0xFF000000) >> 24;
2931         unsigned long part_number = (cpuid & 0xFFF0);
2932
2933         /* ARM Ltd CPUs. */
2934         if (0x41 == implementor) {
2935                 switch (part_number) {
2936                 case 0xB360:    /* ARM1136 */
2937                 case 0xB560:    /* ARM1156 */
2938                 case 0xB760:    /* ARM1176 */
2939                         armpmu = &armv6pmu;
2940                         memcpy(armpmu_perf_cache_map, armv6_perf_cache_map,
2941                                         sizeof(armv6_perf_cache_map));
2942                         perf_max_events = armv6pmu.num_events;
2943                         break;
2944                 case 0xB020:    /* ARM11mpcore */
2945                         armpmu = &armv6mpcore_pmu;
2946                         memcpy(armpmu_perf_cache_map,
2947                                armv6mpcore_perf_cache_map,
2948                                sizeof(armv6mpcore_perf_cache_map));
2949                         perf_max_events = armv6mpcore_pmu.num_events;
2950                         break;
2951                 case 0xC080:    /* Cortex-A8 */
2952                         armv7pmu.id = ARM_PERF_PMU_ID_CA8;
2953                         memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map,
2954                                 sizeof(armv7_a8_perf_cache_map));
2955                         armv7pmu.event_map = armv7_a8_pmu_event_map;
2956                         armpmu = &armv7pmu;
2957
2958                         /* Reset PMNC and read the nb of CNTx counters
2959                             supported */
2960                         armv7pmu.num_events = armv7_reset_read_pmnc();
2961                         perf_max_events = armv7pmu.num_events;
2962                         break;
2963                 case 0xC090:    /* Cortex-A9 */
2964                         armv7pmu.id = ARM_PERF_PMU_ID_CA9;
2965                         memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map,
2966                                 sizeof(armv7_a9_perf_cache_map));
2967                         armv7pmu.event_map = armv7_a9_pmu_event_map;
2968                         armpmu = &armv7pmu;
2969
2970                         /* Reset PMNC and read the nb of CNTx counters
2971                             supported */
2972                         armv7pmu.num_events = armv7_reset_read_pmnc();
2973                         perf_max_events = armv7pmu.num_events;
2974                         break;
2975                 }
2976         /* Intel CPUs [xscale]. */
2977         } else if (0x69 == implementor) {
2978                 part_number = (cpuid >> 13) & 0x7;
2979                 switch (part_number) {
2980                 case 1:
2981                         armpmu = &xscale1pmu;
2982                         memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
2983                                         sizeof(xscale_perf_cache_map));
2984                         perf_max_events = xscale1pmu.num_events;
2985                         break;
2986                 case 2:
2987                         armpmu = &xscale2pmu;
2988                         memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
2989                                         sizeof(xscale_perf_cache_map));
2990                         perf_max_events = xscale2pmu.num_events;
2991                         break;
2992                 }
2993         }
2994
2995         if (armpmu) {
2996                 pr_info("enabled with %s PMU driver, %d counters available\n",
2997                                 arm_pmu_names[armpmu->id], armpmu->num_events);
2998         } else {
2999                 pr_info("no hardware support available\n");
3000                 perf_max_events = -1;
3001         }
3002
3003         return 0;
3004 }
3005 arch_initcall(init_hw_perf_events);
3006
3007 /*
3008  * Callchain handling code.
3009  */
3010 static inline void
3011 callchain_store(struct perf_callchain_entry *entry,
3012                 u64 ip)
3013 {
3014         if (entry->nr < PERF_MAX_STACK_DEPTH)
3015                 entry->ip[entry->nr++] = ip;
3016 }
3017
3018 /*
3019  * The registers we're interested in are at the end of the variable
3020  * length saved register structure. The fp points at the end of this
3021  * structure so the address of this struct is:
3022  * (struct frame_tail *)(xxx->fp)-1
3023  *
3024  * This code has been adapted from the ARM OProfile support.
3025  */
3026 struct frame_tail {
3027         struct frame_tail   *fp;
3028         unsigned long       sp;
3029         unsigned long       lr;
3030 } __attribute__((packed));
3031
3032 /*
3033  * Get the return address for a single stackframe and return a pointer to the
3034  * next frame tail.
3035  */
3036 static struct frame_tail *
3037 user_backtrace(struct frame_tail *tail,
3038                struct perf_callchain_entry *entry)
3039 {
3040         struct frame_tail buftail;
3041
3042         /* Also check accessibility of one struct frame_tail beyond */
3043         if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
3044                 return NULL;
3045         if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail)))
3046                 return NULL;
3047
3048         callchain_store(entry, buftail.lr);
3049
3050         /*
3051          * Frame pointers should strictly progress back up the stack
3052          * (towards higher addresses).
3053          */
3054         if (tail >= buftail.fp)
3055                 return NULL;
3056
3057         return buftail.fp - 1;
3058 }
3059
3060 static void
3061 perf_callchain_user(struct pt_regs *regs,
3062                     struct perf_callchain_entry *entry)
3063 {
3064         struct frame_tail *tail;
3065
3066         callchain_store(entry, PERF_CONTEXT_USER);
3067
3068         if (!user_mode(regs))
3069                 regs = task_pt_regs(current);
3070
3071         tail = (struct frame_tail *)regs->ARM_fp - 1;
3072
3073         while (tail && !((unsigned long)tail & 0x3))
3074                 tail = user_backtrace(tail, entry);
3075 }
3076
3077 /*
3078  * Gets called by walk_stackframe() for every stackframe. This will be called
3079  * whist unwinding the stackframe and is like a subroutine return so we use
3080  * the PC.
3081  */
3082 static int
3083 callchain_trace(struct stackframe *fr,
3084                 void *data)
3085 {
3086         struct perf_callchain_entry *entry = data;
3087         callchain_store(entry, fr->pc);
3088         return 0;
3089 }
3090
3091 static void
3092 perf_callchain_kernel(struct pt_regs *regs,
3093                       struct perf_callchain_entry *entry)
3094 {
3095         struct stackframe fr;
3096
3097         callchain_store(entry, PERF_CONTEXT_KERNEL);
3098         fr.fp = regs->ARM_fp;
3099         fr.sp = regs->ARM_sp;
3100         fr.lr = regs->ARM_lr;
3101         fr.pc = regs->ARM_pc;
3102         walk_stackframe(&fr, callchain_trace, entry);
3103 }
3104
3105 static void
3106 perf_do_callchain(struct pt_regs *regs,
3107                   struct perf_callchain_entry *entry)
3108 {
3109         int is_user;
3110
3111         if (!regs)
3112                 return;
3113
3114         is_user = user_mode(regs);
3115
3116         if (!current || !current->pid)
3117                 return;
3118
3119         if (is_user && current->state != TASK_RUNNING)
3120                 return;
3121
3122         if (!is_user)
3123                 perf_callchain_kernel(regs, entry);
3124
3125         if (current->mm)
3126                 perf_callchain_user(regs, entry);
3127 }
3128
3129 static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
3130
3131 struct perf_callchain_entry *
3132 perf_callchain(struct pt_regs *regs)
3133 {
3134         struct perf_callchain_entry *entry = &__get_cpu_var(pmc_irq_entry);
3135
3136         entry->nr = 0;
3137         perf_do_callchain(regs, entry);
3138         return entry;
3139 }